diff --git a/src/dmr_le.c b/src/dmr_le.c
index 4eb7051..1f0291d 100644
--- a/src/dmr_le.c
+++ b/src/dmr_le.c
@@ -272,9 +272,15 @@ void dmr_sbrc (dsd_opts * opts, dsd_state * state, uint8_t power)
   uint8_t key = (sbrc_hex >> 3) & 0xFF;
   uint8_t txi_delay = (sbrc_hex >> 3) & 0x1F; //middle five are the 'delay' value on a TXI system
 
+  //Note: AES-256 Key 1 will pass a CRC3 due to its bit arrangement vs the CRC poly 1101
+  // if (irr_err == 0 && sbrc_hex = 0xD) crc3_okay = 0; //SB: 00000001101
+
+  //NOTE: on above, I belive that we need to check by opcode as well, as a CRC3 can have multiple collisions
+  //so we need to exclude op/alg 0 and 3 from the check (does algID 0x03/0x23 even exist?)
+
   if (opts->dmr_le == 1) //this will now require a user to switch it on or off until more testing/figuring can be done
   {
-    if (irr_err != 0) fprintf (stderr, "\n %s SLOT %d SB/RC (FEC ERR) %d %s \n", KRED, slot, irr_err, KNRM);
+    if (irr_err != 0) fprintf (stderr, "\n%s SLOT %d SB/RC (FEC ERR) %d %s \n", KRED, slot, irr_err, KNRM);
     if (irr_err == 0)
     {
       if (sbrc_hex == 0) ; //NULL, do nothing
@@ -289,8 +295,8 @@ void dmr_sbrc (dsd_opts * opts, dsd_state * state, uint8_t power)
         //do something with the reverse channel information
       }
 
-      //if the call is interruptable (TXI) and the crc3 is okay
-      else if (crc3_okay == 1)
+      //if the call is interruptable (TXI) and the crc3 is okay and TXI Opcode
+      else if (crc3_okay == 1 && (sbrc_opcode == 0 || sbrc_opcode == 3) )
       {
         //opcodes -- 0 (NULL), BR Delay (3)
         fprintf (stderr, "\n");
diff --git a/src/dsd_ncurses.c b/src/dsd_ncurses.c
index 66c5113..bd3d287 100644
--- a/src/dsd_ncurses.c
+++ b/src/dsd_ncurses.c
@@ -2352,7 +2352,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
   {
     printw ("| Fast Scan Mode Enabled ");
     if (state->lcn_freq_roll != 0) 
-      printw (" - Frequency: [%.06lf] Mhz", (double)state->trunk_lcn_freq[state->lcn_freq_roll-1]/1000000);
+      printw (" - Frequency: %.06lf Mhz", (double)state->trunk_lcn_freq[state->lcn_freq_roll-1]/1000000);
     printw (" Speed: %.02lf sec \n", opts->trunk_hangtime);  //not sure values less than 1 make a difference, may be system/environment dependent 
   }
 
@@ -2424,7 +2424,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
         if (idas == 1) printw ("Monitoring RTCH2 Channel"); //Idas RTCH2 Channel
         if (state->p25_cc_freq != 0)
         {
-          printw (" - Frequency: [%.06lf] Mhz ", (double)state->p25_cc_freq/1000000);
+          printw (" - Frequency: %.06lf Mhz ", (double)state->p25_cc_freq/1000000);
         }
       } 
       else if (opts->p25_is_tuned == 1)
@@ -2433,7 +2433,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
         if (idas == 1) printw ("Monitoring RTCH2 Channel"); //Idas RTCH2
         if (state->p25_vc_freq[0] != 0)
         {
-          printw (" - Frequency: [%.06lf] Mhz ", (double)state->p25_vc_freq[0]/1000000);
+          printw (" - Frequency: %.06lf Mhz ", (double)state->p25_vc_freq[0]/1000000);
         }
       }
 
@@ -2581,15 +2581,15 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
       printw ("%s", state->dmr_site_parms); //site id, net id, etc 
       if (state->dmr_rest_channel > 0)
       {
-        printw ("Rest Channel: [%02d] ", state->dmr_rest_channel);
+        printw ("Rest LSN: %02d; ", state->dmr_rest_channel);
         if (state->trunk_chan_map[state->dmr_rest_channel] != 0)
         {
-          printw ("Freq: [%.06lf] Mhz", (double)state->trunk_chan_map[state->dmr_rest_channel]/1000000);
+          printw ("Freq: %.06lf Mhz", (double)state->trunk_chan_map[state->dmr_rest_channel]/1000000);
         }
       }
       else if (state->p25_cc_freq != 0)
       {
-        printw ("Freq: [%.06lf] MHz", (double)state->p25_cc_freq/1000000);
+        printw ("Freq: %.06lf MHz", (double)state->p25_cc_freq/1000000);
       }
       
     }
@@ -2602,7 +2602,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
       printw ("P25 P1 - [%05llX][%03llX][%03llX] RFSS: [%lld] SITE: [%lld] ", state->p2_wacn, state->p2_sysid, state->p2_cc, state->p2_rfssid, state->p2_siteid);
       if (state->p25_cc_freq != 0)
       {
-        printw ("Freq: [%.06lf] MHz", (double)state->p25_cc_freq/1000000);
+        printw ("Freq: %.06lf MHz", (double)state->p25_cc_freq/1000000);
       }
     }
     else if (lls == 35 || lls == 36) //P2
@@ -2624,7 +2624,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
       {
         if (state->p25_cc_freq != 0)
         {
-          printw ("Freq: [%.06lf] MHz", (double)state->p25_cc_freq/1000000);
+          printw ("Freq: %.06lf MHz", (double)state->p25_cc_freq/1000000);
         }
       }
     }
@@ -2721,7 +2721,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
       printw("Double DES");
       attron(COLOR_PAIR(3));
     }
-    if (state->payload_algid == 0x83 || state->payload_algid == 0x23)
+    if (state->payload_algid == 0x83)
     {
       attron(COLOR_PAIR(1));
       printw("Triple DES");
@@ -2914,7 +2914,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
         printw("DES-OFB");
         attron(COLOR_PAIR(3));
       }
-      if (state->payload_algidR == 0x83 || state->payload_algidR == 0x23)
+      if (state->payload_algidR == 0x83)
       {
         attron(COLOR_PAIR(1));
         printw("Triple DES");
@@ -3049,7 +3049,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
         if (state->p25_vc_freq[0] != 0)
         {
           attron(COLOR_PAIR(4));
-          printw ("Frequency: [%.06lf] MHz  ", (double)state->p25_vc_freq[0]/1000000);
+          printw ("Frequency: %.06lf MHz  ", (double)state->p25_vc_freq[0]/1000000);
         }
         if (state->carrier == 1) attron(COLOR_PAIR(3));
         else attroff(COLOR_PAIR(4));
diff --git a/src/p25p1_hdu.c b/src/p25p1_hdu.c
index 138b34f..769c746 100644
--- a/src/p25p1_hdu.c
+++ b/src/p25p1_hdu.c
@@ -469,7 +469,7 @@ processHDU(dsd_opts* opts, dsd_state* state)
   {
 
     fprintf (stderr, "%s", KYEL);
-    fprintf (stderr, " HDU  ALG ID: 0x%02X KEY ID: 0x%04X MI: 0x%08llX%08llX%02llX", algidhex, kidhex, mihex1, mihex2, mihex3);
+    fprintf (stderr, " HDU  ALG ID: 0x%02X KEY ID: 0x%04X MI: 0x%08llX%08llX", algidhex, kidhex, mihex1, mihex2);
     state->payload_algid = algidhex;
     state->payload_keyid = kidhex;
     if (state->R != 0 && state->payload_algid == 0xAA)
@@ -477,6 +477,11 @@ processHDU(dsd_opts* opts, dsd_state* state)
       fprintf (stderr, " Key: %010llX", state->R);
       opts->unmute_encrypted_p25 = 1;
     }
+    else if (state->payload_algid != 0 && state->payload_algid != 0x80)
+    {
+      //may want to mute this again, or may not want to
+      opts->unmute_encrypted_p25 = 0;
+    }
     fprintf (stderr, "%s", KNRM);
     //only use 64 MSB, trailing 8 bits aren't used, so no mihex3
     state->payload_miP = (mihex1 << 32) | (mihex2);
diff --git a/src/p25p1_ldu2.c b/src/p25p1_ldu2.c
index edb85ff..87ec07a 100644
--- a/src/p25p1_ldu2.c
+++ b/src/p25p1_ldu2.c
@@ -371,7 +371,7 @@ processLDU2 (dsd_opts * opts, dsd_state * state)
   if (irrecoverable_errors == 0)
   {
     fprintf (stderr, "%s", KYEL);
-    fprintf (stderr, " LDU2 ALG ID: 0x%02X KEY ID: 0x%04X MI: 0x%08llX%08llX%02llX", algidhex, kidhex, mihex1, mihex2, mihex3);
+    fprintf (stderr, " LDU2 ALG ID: 0x%02X KEY ID: 0x%04X MI: 0x%08llX%08llX", algidhex, kidhex, mihex1, mihex2);
     state->payload_algid = algidhex;
     state->payload_keyid = kidhex;
     if (state->R != 0 && state->payload_algid == 0xAA)
@@ -379,6 +379,11 @@ processLDU2 (dsd_opts * opts, dsd_state * state)
       fprintf (stderr, " Key: %010llX", state->R);
       opts->unmute_encrypted_p25 = 1;
     }
+    else if (state->payload_algid != 0 && state->payload_algid != 0x80)
+    {
+      //may want to mute this again, or may not want to
+      opts->unmute_encrypted_p25 = 0;
+    }
     fprintf (stderr, "%s", KNRM);
     //only use 64 MSB, trailing 8 bits aren't used, so no mihex3
     state->payload_miP = (mihex1 << 32) | (mihex2);