diff --git a/src/p25p2_frame.c b/src/p25p2_frame.c
index 04461f9..c1a606c 100644
--- a/src/p25p2_frame.c
+++ b/src/p25p2_frame.c
@@ -798,10 +798,9 @@ void process_P2_DUID (dsd_opts * opts, dsd_state * state)
 		fprintf (stderr,"%s ", getTime());
 		fprintf (stderr, "       P25p2 ");
 
-		//print our VCH channel number, or print S for SACCH since its inverted
-		if (state->currentslot == 0 && duid_decoded != 3 && duid_decoded != 12)
+		if (state->currentslot == 0 && duid_decoded != 3 && duid_decoded != 12 && duid_decoded != 13 && duid_decoded != 4)
 		{
-			fprintf (stderr, "VCH 0 ");
+			fprintf (stderr, "LCH 0 ");
 			//open MBEout file - slot 1 - USE WITH CAUTION on Phase 2! Consider using a symbol capture bin instead!
 			if (duid_decoded == 0 || duid_decoded == 6) //4V or 2V (voice)
 			{
@@ -809,9 +808,9 @@ void process_P2_DUID (dsd_opts * opts, dsd_state * state)
 				if ((opts->mbe_out_dir[0] != 0) && (opts->mbe_out_f == NULL)) openMbeOutFile (opts, state);
 			}
 		}
-		else if (state->currentslot == 1 && duid_decoded != 3 && duid_decoded != 12)
+		else if (state->currentslot == 1 && duid_decoded != 3 && duid_decoded != 12 && duid_decoded != 13 && duid_decoded != 4)
 		{
-			fprintf (stderr, "VCH 1 ");
+			fprintf (stderr, "LCH 1 ");
 			//open MBEout file - slot 2 - USE WITH CAUTION on Phase 2! Consider using a symbol capture bin instead!
 			if (duid_decoded == 0 || duid_decoded == 6) //4V or 2V (voice)
 			{
@@ -819,10 +818,21 @@ void process_P2_DUID (dsd_opts * opts, dsd_state * state)
       	if ((opts->mbe_out_dir[0] != 0) && (opts->mbe_out_fR == NULL)) openMbeOutFileR (opts, state);
 			}
 		}
+		//The LCCH may occupy LCH 0 or LCH 1 or both. BBAD 3.3 p8
+		else if (duid_decoded == 13) //MAC_SIGNAL, or clear LCCH
+		{
+			// sacch = 1; //only an 'inverted' slot when its TS index 10 or 11
+			fprintf (stderr, "LCCH  ");
+		}
+		else if (duid_decoded == 4) //Scrambled LCCH (TDMA_CC only...look in the manual again)
+		{
+			// sacch = 1; //only an 'inverted' slot when its TS index 10 or 11
+			fprintf (stderr, "LCCHs ");
+		}
 		else
 		{
-			sacch = 1;
-			fprintf (stderr, "VCH S ");
+			sacch = 1; //always an "inverted" sacch slot
+			fprintf (stderr, "SACCH ");
 		}
 
 		//check to see when last voice activity occurred in order to allow tuning on phase 2
@@ -891,7 +901,6 @@ void process_P2_DUID (dsd_opts * opts, dsd_state * state)
 		}
 		else if (duid_decoded == 4)
 		{
-			fprintf (stderr, " LCCH Sc"); //w/ scrambling
 			if (state->p2_wacn != 0 && state->p2_cc != 0 && state->p2_sysid != 0 &&
 					state->p2_wacn != 0xFFFFF && state->p2_cc != 0xFFF && state->p2_sysid != 0xFFF)
 			{
@@ -932,13 +941,20 @@ void process_P2_DUID (dsd_opts * opts, dsd_state * state)
 		//add 360 bits to each counter
 		vc_counter = vc_counter + 360;
 
-		//WIP: revert from voice to !sacch -- voice was causing blip/stutter on single and dual voice (!sacch is still smoother playback)
+		//NOTE: Could be an issue if MAC_SIGNAL onn LCH 1 and voice in LCH 0? It might Stutter?
 		if (sacch == 0 && ts_counter & 1 && opts->floating_point == 1 && opts->pulse_digi_rate_out == 8000)
 				playSynthesizedVoiceFS4 (opts, state);
 
 		if (sacch == 0 && ts_counter & 1 && opts->floating_point == 0 && opts->pulse_digi_rate_out == 8000)
 				playSynthesizedVoiceSS4 (opts, state);
 
+		//debug: fix burst indicator for ncurses if marginal signal
+		// if (voice)
+		// {
+		// 	if (state->currentslot == 0) state->dmrburstL = 21;
+		// 	else state->dmrburstR = 21;
+		// }
+
 		//flip slots after each TS processed
 		if (state->currentslot == 0)
 		{
diff --git a/src/p25p2_vpdu.c b/src/p25p2_vpdu.c
index d20d374..25338d9 100644
--- a/src/p25p2_vpdu.c
+++ b/src/p25p2_vpdu.c
@@ -67,8 +67,13 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
 	//assigning here if OECI MAC SIGNAL, after passing RS and CRC
 	if (state->p2_is_lcch == 1)
 	{
-		if (slot == 1) state->dmrburstL = 30;
-		else state->dmrburstR = 30;
+		//fix for blinking SIGNAL on Slot 2 during inverted slot in Ncurses
+		//TEMP: assume LCH 0 is the SIGNAL slot, fix for blinking SIGNAL on Slot 2 during inverted slot
+		if (type == 0 && slot == 0) state->dmrburstL = 30;
+		if (type == 1 && slot == 0) state->dmrburstL = 30;
+		// if (type == 0 && slot == 1) state->dmrburstR = 30; 
+		// if (type == 1 && slot == 1) state->dmrburstR = 30;
+
 	}
 
 
@@ -1382,21 +1387,44 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
 
 		//TODO: Restructure this function to group standard Opcodes away from MFID 90 and MFID A4, and Unknown MFID
 		//or just go to if-elseif-else layout (probably easier that way)
-		//Unknown Harris A4 Opcodes
+		//Harris A4 Opcodes
 		if (MAC[1+len_a] != 0xB0 && MAC[2+len_a] == 0xA4)
 		{
 			// 6.2.36 Manufacturer Specific regarding octet 3 as len
 			int len = MAC[3+len_a] & 0x3F;
 			int res = MAC[3+len_a] >> 6;
+			int k = 0;
+
+			//NOTE: slot is already checked
+			
 			//sanity check that we don't exceed the max MAC array size
 			if (len > 24)
 				len = 24; //should never exceed this len, but just in case it does
-			//sanity check that we don't pick this up in a second message and exceed the MAC array
-			// if ( (len + len_a) > 24) len = 24-len_a; //not required, since we can only go to 24 anyways
-			//end sanity checks
-			fprintf (stderr, "\n MFID A4 (Harris); Res: %d; Len: %d; Opcode: %02llX; ", res, len, MAC[1+len_a]);
-			for (i = 1; i < len; i++)
-				fprintf (stderr, "%02llX", MAC[i+len_a]);
+
+			//Harris "Talker" Alias -- Not always in the SACCH, has been seen in the FACCH as well (before MAC_PTT)
+			if (MAC[1+len_a] == 0xA8) //1010 1000 (so, its opcode is 0x28, with the b = 0b10 value for manufacturer message?)
+			{
+				fprintf (stderr, "\n MFID A4 (Harris); VCH %d Talker Alias: ", slot);
+				for (i = 4; i < len; i++) //this should be okay
+				{
+					if ( (MAC[i+len_a] > 0x19) && (MAC[i+len_a] < 0x7F) )
+						fprintf (stderr, "%c", (char)MAC[i+len_a]);
+					else fprintf (stderr, " ");
+
+					if ( (MAC[i+len_a] > 0x19) && (MAC[i+len_a] < 0x7F) )
+						state->dmr_alias_block_segment[slot][0][k/4][k%4] = MAC[i+len_a];
+					else state->dmr_alias_block_segment[slot][0][k/4][k%4] = 0x20;
+					k++;
+				}
+			}
+
+			else
+			{
+				fprintf (stderr, "\n MFID A4 (Harris); Res: %d; Len: %d; Opcode: %02llX; ", res, len, MAC[1+len_a] & 0x3F); //first two bits are the b0 and b1 
+				for (i = 4; i < len; i++)
+					fprintf (stderr, "%02llX", MAC[i+len_a]);
+			}
+			
 		}
 
 		/*
diff --git a/src/p25p2_xcch.c b/src/p25p2_xcch.c
index daf60a6..7ff4fb5 100644
--- a/src/p25p2_xcch.c
+++ b/src/p25p2_xcch.c
@@ -260,10 +260,14 @@ void process_SACCH_MAC_PDU (dsd_opts * opts, dsd_state * state, int payload[180]
 
 		}
 
-		//TEST: Return to CC on MAC_END_PTT if other slot is idle...
-		//NOTE: This may or may not work well, need to run some tests first
-		//I really need to look into what SUIDs do when there is a MAC_END_PTT
-		//do they linger momentarily, or immediately go back to the CC?
+		//Return to CC on MAC_END_PTT if other slot is idle
+		//TODO: Look at the source address of the END_PTT, if it is 0xFFFFFF, then its from the FNE?
+		//if from the FNE, that may be when we know channel teardown will really occur vs using MAC_END_PTT directly
+
+		/*
+		Upon receipt of a MAC_END_PTT PDU on the assigned VCH, and having verified it contains the
+		correct color code, the SU shall return to the idle state on the control channel.
+		*/
 
 		//NOTE: Disable return later on if not desirable to use
 
@@ -603,6 +607,7 @@ void process_FACCH_MAC_PDU (dsd_opts * opts, dsd_state * state, int payload[156]
 				state->aout_gainR = opts->audio_gain;
 		}
 
+		//Return to CC on MAC_END_PTT if other slot is idle
 		//NOTE: Disable return later on if not desirable to use
 
 		//end_ptt in this slot, idle in the other slot (Normal Slots)