/*------------------------------------------------------------------------------- * p25p1_mpdu.c * P25p1 Multi Block PDU and Multi Block Trunking * * LWVMOBILE * 2024-12 DSD-FME Florida Man Edition *-----------------------------------------------------------------------------*/ #include "dsd.h" void processRSP(uint8_t C, uint8_t T, uint8_t S, char * rsp_string) { if (C == 0) sprintf (rsp_string, " ACK (Success);"); else if (C == 2) sprintf (rsp_string, " SACK (Retry);"); else if (C == 1) { if (T == 0) sprintf (rsp_string, " NACK (Illegal Format);"); else if (T == 1) sprintf (rsp_string, " NACK (CRC32 Failure);"); else if (T == 2) sprintf (rsp_string, " NACK (Memory Full);"); else if (T == 3) sprintf (rsp_string, " NACK (FSN Sequence Error);"); else if (T == 4) sprintf (rsp_string, " NACK (Undeliverable);"); else if (T == 5) sprintf (rsp_string, " NACK (NS/VR Sequence Error);"); //depreciated else if (T == 6) sprintf (rsp_string, " NACK (Invalid User on System);"); } fprintf (stderr, " Response Packet:%s C: %X; T: %X; S: %X; ", rsp_string, C, T, S); } void processSAP(uint8_t SAP, char * sap_string) { if (SAP == 0) sprintf (sap_string, " User Data;"); else if (SAP == 1) sprintf (sap_string, " Encrypted User Data;"); else if (SAP == 2) sprintf (sap_string, " Circuit Data;"); else if (SAP == 3) sprintf (sap_string, " Circuit Data Control;"); else if (SAP == 4) sprintf (sap_string, " Packet Data;"); else if (SAP == 5) sprintf (sap_string, " Address Resolution Protocol;"); else if (SAP == 6) sprintf (sap_string, " SNDCP Packet Data Control;"); else if (SAP == 15) sprintf (sap_string, " Packet Data Scan Preamble;"); else if (SAP == 29) sprintf (sap_string, " Packet Data Encryption Support;"); else if (SAP == 31) sprintf (sap_string, " Extended Address;"); else if (SAP == 32) sprintf (sap_string, " Registration and Authorization;"); else if (SAP == 33) sprintf (sap_string, " Channel Reassignment;"); else if (SAP == 34) sprintf (sap_string, " System Configuration;"); else if (SAP == 35) sprintf (sap_string, " Mobile Radio Loopback;"); else if (SAP == 36) sprintf (sap_string, " Mobile Radio Statistics;"); else if (SAP == 37) sprintf (sap_string, " Mobile Radio Out of Service;"); else if (SAP == 38) sprintf (sap_string, " Mobile Radio Paging;"); else if (SAP == 39) sprintf (sap_string, " Mobile Radio Configuration;"); else if (SAP == 40) sprintf (sap_string, " Unencrypted Key Management;"); else if (SAP == 41) sprintf (sap_string, " Encrypted Key Management;"); else if (SAP == 48) sprintf (sap_string, " Location Service;"); else if (SAP == 61) sprintf (sap_string, " Trunking Control;"); else if (SAP == 63) sprintf (sap_string, " Encrypted Trunking Control;"); //catch all for everything else else sprintf (sap_string, " Unknown SAP;"); fprintf (stderr, "SAP: 0x%02X;%s ", SAP, sap_string); } // static uint32_t crc32mbf(uint8_t buf[], int len) static uint32_t crc32mbf(uint8_t * buf, int len) { uint32_t g = 0x04c11db7; uint64_t crc = 0; for (int i = 0; i < len; i++) { crc <<= 1; int b = ( buf [i / 8] >> (7 - (i % 8)) ) & 1; if (((crc >> 32) ^ b) & 1) crc ^= g; } crc = (crc & 0xffffffff) ^ 0xffffffff; return crc; } void processMPDU(dsd_opts * opts, dsd_state * state) { //p25p2 18v reset counters and buffers state->voice_counter[0] = 0; //reset state->voice_counter[1] = 0; //reset memset (state->s_l4, 0, sizeof(state->s_l4)); memset (state->s_r4, 0, sizeof(state->s_r4)); opts->slot_preference = 2; //reset some strings when returning from a call in case they didn't get zipped already sprintf (state->call_string[0], "%s", " "); //21 spaces sprintf (state->call_string[1], "%s", " "); //21 spaces //clear stale Active Channel messages here if ( (time(NULL) - state->last_active_time) > 3 ) { memset (state->active_channel, 0, sizeof(state->active_channel)); } uint8_t tsbk_dibit[98]; memset (tsbk_dibit, 0, sizeof(tsbk_dibit)); int dibit = 0; int r34 = 0; uint8_t tsbk_byte[12]; //12 byte return from p25_12 memset (tsbk_byte, 0, sizeof(tsbk_byte)); uint8_t r34byte_b[18]; memset (r34byte_b, 0, sizeof(r34byte_b)); //TODO: Expand storage to be able to hold 127 blocks + 1 header of data at 144 bits (18 octets uint8_t r34bytes[18*129]; //18 octets at 129 blocks (a little extra padding) memset (r34bytes, 0, sizeof(r34bytes)); unsigned long long int PDU[18*129]; memset (PDU, 0, 18*129*sizeof(unsigned long long int)); int tsbk_decoded_bits[18*129*8]; //decoded bits from tsbk_bytes for sending to crc16_lb_bridge memset (tsbk_decoded_bits, 0, sizeof(tsbk_decoded_bits)); uint8_t mpdu_decoded_bits[18*129*8]; memset (mpdu_decoded_bits, 0, sizeof(mpdu_decoded_bits)); uint8_t mpdu_crc_bits[18*129*8]; memset (mpdu_crc_bits, 0, sizeof(mpdu_crc_bits)); uint8_t mpdu_crc9_bits[18*129*8]; memset (mpdu_crc9_bits, 0, sizeof(mpdu_crc9_bits)); uint8_t mpdu_crc_bytes[18*129]; memset (mpdu_crc_bytes, 0, sizeof(mpdu_crc_bytes)); int i, j, k, x, z, l; z = 0; l = 0; int ec[129]; //error value returned from p25_12 or 34 trellis decoder int err[2]; //error value returned from crc16 on header and crc32 on full message memset (ec, -2, sizeof(ec)); memset (err, -2, sizeof(err)); int MFID = 0xFF; //Manufacturer ID uint8_t mpdu_byte[18*129]; memset (mpdu_byte, 0, sizeof(mpdu_byte)); uint8_t an = 0; uint8_t io = 0; uint8_t fmt = 0; uint8_t sap = 0; uint8_t blks = 0; uint8_t opcode = 0; uint32_t address = 0; //source, or destination address depending on the io bit (outbound is target) uint8_t fmf = 0; uint8_t pad = 0; uint8_t ns = 0; uint8_t fsnf = 0; uint8_t offset = 0; //response packet uint8_t class = 0; uint8_t type = 0; uint8_t status = 0; int end = 3; //ending value for data gathering repetitions (default at 3) //CRC32 uint32_t CRCComputed = 0; uint32_t CRCExtracted = 0; int stop = 101; int start = 0; //now using modulus on skipdibit values int skipdibit = 36-14; //when we arrive here, we are at this position in the counter after reading FS, NID, DUID, and Parity dibits int status_count = 1; //we have already skipped the Status 1 dibit before arriving here int dibit_count = 0; //number of gathered dibits UNUSED(status_count); //debug counter //collect x-len reps of 100 or 101 dibits (98 valid dibits with two or three status dibits sprinkled in) for (j = 0; j < end; j++) { k = 0; dibit_count = 0; for (i = start; i < stop; i++) { dibit = getDibit(opts, state); if ( (skipdibit / 36) == 0) { dibit_count++; tsbk_dibit[k++] = dibit; } else { skipdibit = 0; status_count++; // fprintf (stderr, " S:%02d; D:%03d; i:%03d;", status_count, (j*101)+i+57, i); //debug Status Count, Total Dibit Count, and i (compare to symbol rx table) // fprintf (stderr, " S:%02d; CD:%02d; i:%03d; d:%d;", status_count, dibit_count, i, dibit); //debug Status Count, Current Dibit Count, i, and status dibit //debug, intepret status dibit (no fec or parity, so could easily be errroneous, could also be different on a data channel vs conventional?) // if (dibit == 0) fprintf (stderr, " Unknown - Use for Talk Around;"); // if (dibit == 1) fprintf (stderr, " Inbound Channel Busy;"); // if (dibit == 2) fprintf (stderr, " Unknown - Use for Inbound or Outbound;"); // if (dibit == 3) fprintf (stderr, " Inbound Channel Idle;"); } skipdibit++; //increment //this is used to skip gathering one dibit as well since we only will end up skipping 2 status dibits (getting 99 instead of 98, throwing alignment off) if (dibit_count == 98) //this could cause an issue though if the next bit read is supposed to be a status dibit (unsure) it may not matter, should be handled as first read in next rep break; } // fprintf (stderr, " DC: %d\n", dibit_count); //debug //send header to p25_12 and return tsbk_byte if (j == 0) ec[j] = p25_12 (tsbk_dibit, tsbk_byte); else if (r34) { //debug // fprintf (stderr, " J:%d;", j); //use this with the P_ERR inside of 34 rate decoder to see where the failures occur ec[j] = dmr_34 (tsbk_dibit, r34byte_b); //shuffle 34 rate data into array if (j != 0) //should never happen, but just in case memcpy (r34bytes+((j-1)*18), r34byte_b, sizeof(r34byte_b)); for (i = 2; i < 18; i++) { for (x = 0; x < 8; x++) mpdu_crc_bits[z++] = ((r34byte_b[i] << x) & 0x80) >> 7; } //arrangement for confirmed data crc9 check //unlike DMR, the first 7 bits of this arrangement are the DBSN, not the last 7 bits for (x = 0; x < 7; x++) mpdu_crc9_bits[l++] = ((r34byte_b[0] << x) & 0x80) >> 7; for (i = 2; i < 18; i++) { for (x = 0; x < 8; x++) mpdu_crc9_bits[l++] = ((r34byte_b[i] << x) & 0x80) >> 7; } } else ec[j] = p25_12 (tsbk_dibit, tsbk_byte); //too many bit manipulations! k = 0; for (i = 0; i < 12; i++) { for (x = 0; x < 8; x++) { tsbk_decoded_bits[k] = ((tsbk_byte[i] << x) & 0x80) >> 7; k++; } } //CRC16 on the header if (j == 0) err[0] = crc16_lb_bridge(tsbk_decoded_bits, 80); //load into bit array for storage (easier decoding for future PDUs) for (i = 0; i < 96; i++) mpdu_decoded_bits[i+(j*96)] = (uint8_t)tsbk_decoded_bits[i]; //shuffle corrected bits back into tsbk_byte k = 0; for (i = 0; i < 12; i++) { int byte = 0; for (x = 0; x < 8; x++) { byte = byte << 1; byte = byte | tsbk_decoded_bits[k]; k++; } tsbk_byte[i] = byte; mpdu_byte[i+(j*12)] = byte; //add to completed MBF format 12 rate bytes } //check header data to see if this is a 12 rate, or 4 rate packet data unit if (j == 0 && err[0] == 0) { an = (mpdu_byte[0] >> 6) & 0x1; io = (mpdu_byte[0] >> 5) & 0x1; fmt = mpdu_byte[0] & 0x1F; sap = mpdu_byte[1] & 0x3F; blks = mpdu_byte[6] & 0x7F; MFID = mpdu_byte[2]; address = (mpdu_byte[3] << 16) | (mpdu_byte[4] << 8) | mpdu_byte[5]; //LLID, inbound is the source, outbound is the target fmf = (mpdu_byte[6] >> 7) & 0x1; pad = mpdu_byte[7] & 0x1F; ns = (mpdu_byte[8] >> 4) & 0x7; fsnf = mpdu_byte[8] & 0xF; offset = mpdu_byte[9] & 0x3F; //response packet class = (mpdu_byte[1] >> 6) & 0x3; type = (mpdu_byte[1] >> 3) & 0x7; status = (mpdu_byte[1] >> 0) & 0x7; if (an == 1 && fmt == 0b10110) //confirmed data packet header block r34 = 1; //set end value to number of blocks + 1 header (block gathering for variable len) if (sap != 61 && sap != 63) //if not a trunking control block, this fixes an annoyance TSBK/TDULC blink in ncurses end = blks + 1; //(TDU follows any Trunking MPDU, not sure if that's an error in handling, or actual behavior) //sanity check -- since blks is only 7 bit anyways, this probably isn't needed now if (end > 128) end = 128; //Storage for up to 127 blocks plus 1 header } } if (err[0] == 0) { fprintf (stderr, "%s",KGRN); fprintf (stderr, " P25 Data - AN: %d; IO: %d; FMT: %02X; ", an, io, fmt); char sap_string[40]; char rsp_string[40]; if (fmt != 3) processSAP (sap, sap_string); //decode SAP to see what kind of data we are dealing with else processRSP (class, type, status, rsp_string); //decode the response type (ack, nack, sack) if (sap != 61 && sap != 63) //Not too interested in viewing these on trunking control, just data packets mostly fprintf (stderr, "\n F: %d; Blocks: %02X; Pad: %d; NS: %d; FSNF: %d; Offset: %d; MFID: %02X;", fmf, blks, pad, ns, fsnf, offset, MFID); if (io == 1 && sap != 61 && sap != 63) //destination address if IO bit set fprintf (stderr, " Address: %d;", address); //Print to Data Call String for Ncurses Terminal (if not trunking control or response packet) if (sap != 61 && sap != 63 && fmt != 3) sprintf (state->dmr_lrrp_gps[0], "Data Call:%s SAP:%02X; Address: %d; ", sap_string, sap, address); } else //crc error, so we can't validate information as accurate { fprintf (stderr, "%s",KRED); fprintf (stderr, " P25 Data Header CRC Error"); fprintf (stderr, "%s",KNRM); end = 1; //go ahead and end after this loop } //trunking blocks if ((sap == 0x3D) && ((fmt == 0x17) || (fmt == 0x15))) { if (fmt == 0x15) fprintf (stderr, " UNC"); else fprintf (stderr, " ALT"); fprintf (stderr, " MBT"); if (fmt == 0x17) opcode = mpdu_byte[7] & 0x3F; //alt MBT else opcode = mpdu_byte[12] & 0x3F; //unconf MBT fprintf (stderr, " - OP: %02X", opcode); //CRC32 is now working! CRCExtracted = (mpdu_byte[(12*(blks+1))-4] << 24) | (mpdu_byte[(12*(blks+1))-3] << 16) | (mpdu_byte[(12*(blks+1))-2] << 8) | (mpdu_byte[(12*(blks+1))-1] << 0); CRCComputed = crc32mbf(mpdu_byte+12, (96*blks)-32); if (CRCComputed == CRCExtracted) err[1] = 0; //group list mode so we can look and see if we need to block tuning any groups, etc char mode[8]; //allow, block, digital, enc, etc sprintf (mode, "%s", ""); //if we are using allow/whitelist mode, then write 'B' to mode for block //comparison below will look for an 'A' to write to mode if it is allowed if (opts->trunk_use_allow_list == 1) sprintf (mode, "%s", "B"); //just going to do a couple for now -- the extended format will not be vPDU compatible :( if (err[0] == 0 && err[1] == 0 && io == 1 && fmt == 0x17) //ALT Format { //NET_STS_BCST -- TIA-102.AABC-D 6.2.11.2 if (opcode == 0x3B) { int lra = mpdu_byte[3]; int sysid = ((mpdu_byte[4] & 0xF) << 8) | mpdu_byte[5]; int res_a = mpdu_byte[8]; int res_b = mpdu_byte[9]; long int wacn = (mpdu_byte[12] << 12) | (mpdu_byte[13] << 4) | (mpdu_byte[14] >> 4); int channelt = (mpdu_byte[15] << 8) | mpdu_byte[16]; int channelr = (mpdu_byte[17] << 8) | mpdu_byte[18]; int ssc = mpdu_byte[19]; UNUSED3(res_a, res_b, ssc); fprintf (stderr, "%s",KYEL); fprintf (stderr, "\n Network Status Broadcast MBT - Extended \n"); fprintf (stderr, " LRA [%02X] WACN [%05lX] SYSID [%03X] NAC [%03llX]\n", lra, wacn, sysid, state->p2_cc); fprintf (stderr, " CHAN-T [%04X] CHAN-R [%04X]", channelt, channelr); long int ct_freq = process_channel_to_freq(opts, state, channelt); long int cr_freq = process_channel_to_freq(opts, state, channelr); UNUSED(cr_freq); state->p25_cc_freq = ct_freq; state->p25_cc_is_tdma = 0; //flag off for CC tuning purposes when system is qpsk //place the cc freq into the list at index 0 if 0 is empty, or not the same, //so we can hunt for rotating CCs without user LCN list if (state->trunk_lcn_freq[0] == 0 || state->trunk_lcn_freq[0] != state->p25_cc_freq) { state->trunk_lcn_freq[0] = state->p25_cc_freq; } //only set IF these values aren't already hard set by the user if (state->p2_hardset == 0) { state->p2_wacn = wacn; state->p2_sysid = sysid; } } //RFSS Status Broadcast - Extended 6.2.15.2 else if (opcode == 0x3A) { int lra = mpdu_byte[3]; int lsysid = ((mpdu_byte[4] & 0xF) << 8) | mpdu_byte[5]; int rfssid = mpdu_byte[12]; int siteid = mpdu_byte[13]; int channelt = (mpdu_byte[14] << 8) | mpdu_byte[15]; int channelr = (mpdu_byte[16] << 8) | mpdu_byte[17]; int sysclass = mpdu_byte[18]; fprintf (stderr, "%s",KYEL); fprintf (stderr, "\n RFSS Status Broadcast MBF - Extended \n"); fprintf (stderr, " LRA [%02X] SYSID [%03X] RFSS ID [%03d] SITE ID [%03d]\n CHAN-T [%04X] CHAN-R [%02X] SSC [%02X] ", lra, lsysid, rfssid, siteid, channelt, channelr, sysclass); process_channel_to_freq (opts, state, channelt); process_channel_to_freq (opts, state, channelr); state->p2_siteid = siteid; state->p2_rfssid = rfssid; } //Adjacent Status Broadcast (ADJ_STS_BCST) Extended 6.2.2.2 else if (opcode == 0x3C) { int lra = mpdu_byte[3]; int cfva = mpdu_byte[4] >> 4; int lsysid = ((mpdu_byte[4] & 0xF) << 8) | mpdu_byte[5]; int rfssid = mpdu_byte[8]; int siteid = mpdu_byte[9]; int channelt = (mpdu_byte[12] << 8) | mpdu_byte[13]; int channelr = (mpdu_byte[14] << 8) | mpdu_byte[15]; int sysclass = mpdu_byte[16]; long int wacn = (mpdu_byte[17] << 12) | (mpdu_byte[18] << 4) | (mpdu_byte[19] >> 4); fprintf (stderr, "%s",KYEL); fprintf (stderr, "\n Adjacent Status Broadcast - Extended\n"); fprintf (stderr, " LRA [%02X] CFVA [%X] RFSS[%03d] SITE [%03d] SYSID [%03X]\n CHAN-T [%04X] CHAN-R [%04X] SSC [%02X] WACN [%05lX]\n ", lra, cfva, rfssid, siteid, lsysid, channelt, channelr, sysclass, wacn); if (cfva & 0x8) fprintf (stderr, " Conventional"); if (cfva & 0x4) fprintf (stderr, " Failure Condition"); if (cfva & 0x2) fprintf (stderr, " Up to Date (Correct)"); else fprintf (stderr, " Last Known"); if (cfva & 0x1) fprintf (stderr, " Valid RFSS Connection Active"); process_channel_to_freq (opts, state, channelt); process_channel_to_freq (opts, state, channelr); } //Group Voice Channel Grant - Extended else if (opcode == 0x0) { int svc = mpdu_byte[8]; int channelt = (mpdu_byte[14] << 8) | mpdu_byte[15]; int channelr = (mpdu_byte[16] << 8) | mpdu_byte[17]; long int source = (mpdu_byte[3] << 16) |(mpdu_byte[4] << 8) | mpdu_byte[5]; int group = (mpdu_byte[18] << 8) | mpdu_byte[19]; long int freq1 = 0; long int freq2 = 0; UNUSED2(source, freq2); fprintf (stderr, "%s\n ",KYEL); if (svc & 0x80) fprintf (stderr, " Emergency"); if (svc & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc & 0x20) fprintf (stderr, " Duplex"); if (svc & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc & 0x7); //call priority } fprintf (stderr, " Group Voice Channel Grant Update - Extended"); fprintf (stderr, "\n SVC [%02X] CHAN-T [%04X] CHAN-R [%04X] Group [%d][%04X]", svc, channelt, channelr, group, group); freq1 = process_channel_to_freq (opts, state, channelt); freq2 = process_channel_to_freq (opts, state, channelr); //add active channel to string for ncurses display sprintf (state->active_channel[0], "Active Ch: %04X TG: %d ", channelt, group); state->last_active_time = time(NULL); for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == group) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on P25p1 Ext -- block non-matching target, allow matching group if (state->tg_hold != 0 && state->tg_hold != group) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == group) sprintf (mode, "%s", "A"); //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq1 != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channelt >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; //shim fix to stutter/lag by only enabling slot on the target/channel we tuned to //this will only occur in realtime tuning, not not required .bin or .wav playback if (channelt & 1) //VCH1 { opts->slot1_on = 0; opts->slot2_on = 1; } else //VCH0 { opts->slot1_on = 1; opts->slot2_on = 0; } } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq1); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq1); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } } //Unit to Unit Voice Channel Grant - Extended else if (opcode == 0x6) { //I'm not doing EVERY element of this, just enough for tuning! int svc = mpdu_byte[8]; int channelt = (mpdu_byte[22] << 8) | mpdu_byte[23]; int channelr = (mpdu_byte[24] << 8) | mpdu_byte[25]; //optional! //using source and target address, not source and target id (is this correct?) long int source = (mpdu_byte[3] << 16) | (mpdu_byte[4] << 8) | mpdu_byte[5]; long int target = (mpdu_byte[19] << 16) |(mpdu_byte[20] << 8) | mpdu_byte[21]; //TODO: Test Full Values added here for SUID, particular tgt_nid and tgt_sid long int src_nid = (mpdu_byte[12] << 24) | (mpdu_byte[13] << 16) | (mpdu_byte[14] << 8) | mpdu_byte[15]; long int src_sid = (mpdu_byte[16] << 16) | (mpdu_byte[17] << 8) | mpdu_byte[18]; long int tgt_nid = (mpdu_byte[26] << 16) | (mpdu_byte[27] << 8) | mpdu_byte[28]; //only has 3 octets on tgt nid, partial only? long int tgt_sid = (mpdu_byte[29] << 16) | (mpdu_byte[30] << 8) | mpdu_byte[31]; long int freq1 = 0; long int freq2 = 0; UNUSED(freq2); fprintf (stderr, "%s\n ",KYEL); if (svc & 0x80) fprintf (stderr, " Emergency"); if (svc & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc & 0x20) fprintf (stderr, " Duplex"); if (svc & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc & 0x7); //call priority } fprintf (stderr, " Unit to Unit Voice Channel Grant Update - Extended"); fprintf (stderr, "\n SVC: %02X; CHAN-T: %04X; CHAN-R: %04X; SRC: %ld; TGT: %ld; FULL SRC: %08lX-%08ld; FULL TGT: %08lX-%08ld;", svc, channelt, channelr, source, target, src_nid, src_sid, tgt_nid, tgt_sid); freq1 = process_channel_to_freq (opts, state, channelt); freq2 = process_channel_to_freq (opts, state, channelr); //optional! //add active channel to string for ncurses display sprintf (state->active_channel[0], "Active Ch: %04X TGT: %ld; ", channelt, target); for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == target) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on P25p1 Ext UU -- will want to disable UU_V grants while TG Hold enabled if (state->tg_hold != 0 && state->tg_hold != target) sprintf (mode, "%s", "B"); // if (state->tg_hold != 0 && state->tg_hold == target) sprintf (mode, "%s", "A"); //Skip tuning private calls if group calls are disabled if (opts->trunk_tune_private_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq1 != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channelt >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; //shim fix to stutter/lag by only enabling slot on the target/channel we tuned to //this will only occur in realtime tuning, not not required .bin or .wav playback if (channelt & 1) //VCH1 { opts->slot1_on = 0; opts->slot2_on = 1; } else //VCH0 { opts->slot1_on = 1; opts->slot2_on = 0; } } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq1); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq1); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } } //Telephone Interconnect Voice Channel Grant (or Update) -- Explicit Channel Form else if ( (opcode == 0x8 || opcode == 0x9) && MFID < 2) //This form does allow for other MFID's but Moto has a seperate function on 9 { //TELE_INT_CH_GRANT or TELE_INT_CH_GRANT_UPDT int svc = mpdu_byte[8]; int channel = (mpdu_byte[12] << 8) | mpdu_byte[13]; int timer = (mpdu_byte[16] << 8) | mpdu_byte[17]; int target = (mpdu_byte[3] << 16) | (mpdu_byte[4] << 8) | mpdu_byte[5]; long int freq = 0; fprintf (stderr, "\n"); if (svc & 0x80) fprintf (stderr, " Emergency"); if (svc & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc & 0x20) fprintf (stderr, " Duplex"); if (svc & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc & 0x7); //call priority } fprintf (stderr, " Telephone Interconnect Voice Channel Grant"); if ( opcode & 1) fprintf (stderr, " Update"); fprintf (stderr, " Extended"); fprintf (stderr, "\n CHAN: %04X; Timer: %f Seconds; Target: %d;", channel, (float)timer*0.1f, target); //timer unit is 100 ms, or 0.1 seconds freq = process_channel_to_freq (opts, state, channel); //add active channel to string for ncurses display sprintf (state->active_channel[0], "Active Tele Ch: %04X TGT: %d; ", channel, target); state->last_active_time = time(NULL); //Skip tuning private calls if private calls is disabled (are telephone int calls private, or talkgroup?) if (opts->trunk_tune_private_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //telephone only has a target address (manual shows combined source/target of 24-bits) for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == target) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on UU_V -- will want to disable UU_V grants while TG Hold enabled if (state->tg_hold != 0 && state->tg_hold != target) sprintf (mode, "%s", "B"); //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channel >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; //shim fix to stutter/lag by only enabling slot on the target/channel we tuned to //this will only occur in realtime tuning, not not required .bin or .wav playback if (channel & 1) //VCH1 { opts->slot1_on = 0; opts->slot2_on = 1; } else //VCH0 { opts->slot1_on = 1; opts->slot2_on = 0; } } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq); if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq); if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } if (opts->p25_trunk == 0) { if (target == state->lasttg || target == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; } } } //look at Harris Opcodes and payload portion of MPDU else if (MFID == 0xA4) { //TODO: Add Known Opcodes from Manual (all one of them) fprintf (stderr, "%s",KCYN); fprintf (stderr, "\n MFID A4 (Harris); Opcode: %02X; ", opcode); for (i = 0; i < (12*(blks+1)%37); i++) fprintf (stderr, "%02X", mpdu_byte[i]); fprintf (stderr, " %s",KNRM); } //look at Motorola Opcodes and payload portion of MPDU else if (MFID == 0x90) { //TIA-102.AABH if (opcode == 0x02) { int svc = mpdu_byte[8]; //Just the Res, P-bit, and more res bits int channelt = (mpdu_byte[12] << 8) | mpdu_byte[13]; int channelr = (mpdu_byte[14] << 8) | mpdu_byte[15]; long int source = (mpdu_byte[3] << 16) |(mpdu_byte[4] << 8) | mpdu_byte[5]; int group = (mpdu_byte[16] << 8) | mpdu_byte[17]; long int freq1 = 0; long int freq2 = 0; UNUSED2(source, freq2); fprintf (stderr, "%s\n ",KYEL); if (svc & 0x40) fprintf (stderr, " Encrypted"); //P-bit fprintf (stderr, " MFID90 Group Regroup Channel Grant - Explicit"); fprintf (stderr, "\n RES/P [%02X] CHAN-T [%04X] CHAN-R [%04X] SG [%d][%04X]", svc, channelt, channelr, group, group); freq1 = process_channel_to_freq (opts, state, channelt); freq2 = process_channel_to_freq (opts, state, channelr); //add active channel to string for ncurses display sprintf (state->active_channel[0], "MFID90 Ch: %04X SG: %d ", channelt, group); state->last_active_time = time(NULL); for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == group) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on MFID90 GRG -- block non-matching target, allow matching group if (state->tg_hold != 0 && state->tg_hold != group) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == group) sprintf (mode, "%s", "A"); //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq1 != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channelt >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; //shim fix to stutter/lag by only enabling slot on the target/channel we tuned to //this will only occur in realtime tuning, not not required .bin or .wav playback if (channelt & 1) //VCH1 { opts->slot1_on = 0; opts->slot2_on = 1; } else //VCH0 { opts->slot1_on = 1; opts->slot2_on = 0; } } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq1); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq1); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } } else { fprintf (stderr, "%s",KCYN); fprintf (stderr, "\n MFID 90 (Moto); Opcode: %02X; ", mpdu_byte[0] & 0x3F); for (i = 0; i < (12*(blks+1)%37); i++) fprintf (stderr, "%02X", mpdu_byte[i]); fprintf (stderr, " %s",KNRM); } } else { fprintf (stderr, "%s",KCYN); fprintf (stderr, "\n MFID %02X (Unknown); Opcode: %02X; ", MFID, mpdu_byte[0] & 0x3F); for (i = 0; i < (12*(blks+1)%37); i++) fprintf (stderr, "%02X", mpdu_byte[i]); fprintf (stderr, " %s",KNRM); } } SKIPCALL: ; //do nothing if (opts->payload == 1) { fprintf (stderr, "%s",KCYN); fprintf (stderr, "\n P25 MBT Payload \n "); for (i = 0; i < ((blks+1)*12); i++) { if ( (i != 0) && ((i % 12) == 0)) fprintf (stderr, "\n "); fprintf (stderr, "[%02X]", mpdu_byte[i]); } fprintf (stderr, "\n "); fprintf (stderr, " CRC EXT %08X CMP %08X", CRCExtracted, CRCComputed); fprintf (stderr, "%s ", KNRM); //Header if (err[0] != 0) { fprintf (stderr, "%s",KRED); fprintf (stderr, " (HDR CRC16 ERR)"); fprintf (stderr, "%s",KCYN); } //Completed MBF if (err[1] != 0) { fprintf (stderr, "%s",KRED); fprintf (stderr, " (MBF CRC32 ERR)"); fprintf (stderr, "%s",KCYN); } } fprintf (stderr, "%s ", KNRM); fprintf (stderr, "\n"); } //end trunking block format else if (r34 == 1 && err[0] == 0) //start 34 rate dump if good header crc { //ES Auxiliary Header if (sap == 1) { fprintf (stderr, "%s",KYEL); unsigned long long int mi = (unsigned long long int)ConvertBitIntoBytes(&mpdu_crc_bits[0], 64); uint8_t mi_res = (uint8_t)ConvertBitIntoBytes(&mpdu_crc_bits[64], 8); uint8_t alg_id = (uint8_t)ConvertBitIntoBytes(&mpdu_crc_bits[72], 8); uint16_t key_id = (uint16_t)ConvertBitIntoBytes(&mpdu_crc_bits[80], 16); fprintf (stderr, "\n ALG: %02X; KEY ID: %04X; MI: %016llX; ", alg_id, key_id, mi); if (mi_res != 0) fprintf (stderr, "RES: %02X;", mi_res); //The Auxiliary Header signals the actual SAP value of the encrypted message (this byte is not encrypted) uint8_t aux_res = (uint8_t)ConvertBitIntoBytes(&mpdu_crc_bits[96], 2); //these two bits should always be signalled as 1's, so 0b11, and if combined with the 2ndary SAP, 0xC0 if SAP == 0x00 uint8_t aux_sap = (uint8_t)ConvertBitIntoBytes(&mpdu_crc_bits[98], 6); //the SAP of the message that is encrypted immediately after char aux_sap_string[99]; processSAP (aux_sap, aux_sap_string); fprintf (stderr, "%s",KNRM); UNUSED(aux_res); } // if (opts->payload == 1) //always dump these for now since users are actively choosing to tune to these grants { fprintf (stderr, "%s",KCYN); fprintf (stderr, "\n P25 MPDU 34 Rate Payload \n "); for (i = 0; i < 12; i++) //header fprintf (stderr, "%02X", mpdu_byte[i]); fprintf (stderr, " Header \n "); memset (mpdu_byte, 0, sizeof(mpdu_byte)); for (i = 0; i < 16*10; i++) //16*(blks+1) mpdu_byte[i] = (uint8_t)ConvertBitIntoBytes(&mpdu_crc_bits[i*8], 8); CRCExtracted = (uint32_t)ConvertBitIntoBytes(&mpdu_crc_bits[(128*blks)-32], 32); CRCComputed = crc32mbf(mpdu_byte, (128*blks)-32); if (CRCComputed == CRCExtracted) err[1] = 0; int next = 0; //variable len printing for (i = 2; i <= 18*blks; i++) //<= only because we want that final DBSN/CRC9 printed out { if ( (i != 0) && ((i % 18) == 0)) { uint8_t dbsn = r34bytes[i-18] >> 1; //get the previous DBSN at this point uint16_t crc9_ext = ((r34bytes[i-18] & 1) << 8) | r34bytes[i-17]; uint16_t crc9_cmp = ComputeCrc9Bit(mpdu_crc9_bits+next, 135); next += 135; if (crc9_ext == crc9_cmp) fprintf (stderr, " DBSN: %d;", dbsn+1); else { fprintf (stderr, "%s",KRED); fprintf (stderr, " CRC ERR;"); fprintf (stderr, "%s",KCYN); // fprintf (stderr, " EXT: %03X; CMP: %03X", crc9_ext, crc9_cmp); } if (i != 18*blks) i += 2; //skip the next DBSN/CRC9 if (i != 18*blks) fprintf (stderr, "\n "); } if (i != 18*blks) fprintf (stderr, "%02X", r34bytes[i]); } if (err[1] != 0) { fprintf (stderr, "%s",KRED); fprintf (stderr, "\n (MPDU CRC32 ERR)"); fprintf (stderr, "%s",KCYN); fprintf (stderr, " CRC EXT %08X CMP %08X", CRCExtracted, CRCComputed); } // else // TODO: decode PDU function // if (sap == 0) //user data { fprintf (stderr, "%s",KCYN); fprintf (stderr, "\n P25 MPDU ASCII: "); for (i = 0; i < (16*blks)-4; i++) { if (mpdu_byte[i] <= 0x7E && mpdu_byte[i] >=0x20) fprintf (stderr, "%c", mpdu_byte[i]); else fprintf (stderr, " "); } } fprintf (stderr, "%s ", KNRM); fprintf (stderr, "\n"); } } //end r34 else if (err[0] == 0) //12 rate unconfirmed data { if (blks != 0) { CRCExtracted = (mpdu_byte[(12*(blks+1))-4] << 24) | (mpdu_byte[(12*(blks+1))-3] << 16) | (mpdu_byte[(12*(blks+1))-2] << 8) | (mpdu_byte[(12*(blks+1))-1] << 0); CRCComputed = crc32mbf(mpdu_byte+12, (96*blks)-32); if (CRCComputed == CRCExtracted) err[1] = 0; } else err[1] = 0; //No CRC32 on a lonely header // if (opts->payload == 1) { fprintf (stderr, "%s",KCYN); fprintf (stderr, "\n P25 MPDU 12 Rate Payload: \n "); for (i = 0; i < 12*(blks+1); i++) //header and payload combined { if (i == 12) fprintf (stderr, " Header"); if ( (i != 0) && ((i % 12) == 0)) fprintf (stderr, "\n "); fprintf (stderr, "%02X", mpdu_byte[i]); } } if (err[1] != 0) { fprintf (stderr, "%s",KRED); fprintf (stderr, "\n (MPDU CRC32 ERR)"); fprintf (stderr, "%s",KCYN); fprintf (stderr, " CRC EXT %08X CMP %08X", CRCExtracted, CRCComputed); } // else if (blks != 0) // TODO: decode PDU function fprintf (stderr, "%s",KNRM); fprintf (stderr, "\n"); } else //crc header failure or other { fprintf (stderr, "%s",KNRM); fprintf (stderr, "\n"); } }