/*------------------------------------------------------------------------------- * p25p2_vpdu.c * Phase 2 Variable PDU (and TSBK PDU) Handling * * LWVMOBILE * 2022-10 DSD-FME Florida Man Edition *-----------------------------------------------------------------------------*/ #include "dsd.h" //MAC message lengths static const uint8_t mac_msg_len[256] = { 0, 7, 8, 7, 0, 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //0F 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //1F 0, 14, 15, 0, 0, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //2F 5, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //3F 9, 7, 9, 0, 9, 8, 9, 0, 10, 10, 9, 0, 10, 0, 0, 0, //4F 0, 0, 0, 0, 9, 7, 0, 0, 10, 0, 7, 0, 10, 8, 14, 7, //5F 9, 9, 0, 0, 9, 0, 0, 9, 10, 0, 7, 10, 10, 7, 0, 9, //6F 9, 29, 9, 9, 9, 9, 10, 13, 9, 9, 9, 11, 9, 9, 0, 0, //7F 8, 18, 0, 7, 11, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 7, //8F (needed to add 81 and 8f for Harris) 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //9F 16, 0, 0, 11, 13, 11, 11, 11, 10, 0, 0, 0, 0, 0, 0, 0, //AF 17, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //BF, B0 was 0, set to 17 (Harris again) 11, 0, 0, 8, 15, 12, 15, 32, 12, 12, 0, 27, 14, 29, 29, 32, //CF 0, 0, 0, 0, 0, 0, 9, 0, 14, 29, 11, 27, 14, 0, 40, 11, //DF 28, 0, 0, 14, 17, 14, 0, 0, 16, 8, 11, 0, 13, 19, 0, 0, //EF 0, 0, 16, 14, 0, 0, 12, 0, 22, 0, 11, 13, 11, 0, 15, 0 }; //FF //MAC PDU 3-bit Opcodes BBAC (8.4.1) p 123: //0 - reserved //1 - Mac PTT //2 - Mac End PTT //3 - Mac Idle //4 - Mac Active //5 - reserved //6 - Mac Hangtime //7 - reserved //Mac PTT BBAC p80 //TODO: Check for Non standard MFIDs first MAC[1], then set len on the MAC[2] if //the result from the len table is 0 (had to manually enter a few observed values from Harris) void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned long long int MAC[24]) { //handle variable content MAC PDUs (Active, Idle, Hangtime, or Signal) //use type to specify SACCH or FACCH, so we know if we should invert the currentslot when assigning ids etc //b values - 0 = Unique TDMA Message, 1 Phase 1 OSP/ISP abbreviated // 2 = Manufacturer Message, 3 Phase 1 OSP/ISP extended/explicit int len_a = 0; int len_b = mac_msg_len[MAC[1]]; int len_c = 0; //sanity check if (len_b < 19 && type == 1) { len_c = mac_msg_len[MAC[1+len_b]]; } if (len_b < 16 && type == 0) { len_c = mac_msg_len[MAC[1+len_b]]; } int slot = 9; if (type == 1) //0 for F, 1 for S { slot = (state->currentslot ^ 1) & 1; //flip slot internally for SACCH } else slot = state->currentslot; //assigning here if OECI MAC SIGNAL, after passing RS and CRC if (state->p2_is_lcch == 1) { if (slot == 1) state->dmrburstL = 30; else state->dmrburstR = 30; } if (len_b == 0 || len_b > 18) { goto END_PDU; } //group list mode so we can look and see if we need to block tuning any groups, etc char mode[8]; //allow, block, digital, enc, etc sprintf (mode, "%s", ""); //if we are using allow/whitelist mode, then write 'B' to mode for block //comparison below will look for an 'A' to write to mode if it is allowed if (opts->trunk_use_allow_list == 1) sprintf (mode, "%s", "B"); for (int i = 0; i < 2; i++) { //MFID90 Voice Grants, A3, A4, and A5 <--I bet A4 here was triggering a phantom call when TSBK sent PDUs here //MFID90 Group Regroup Channel Grant - Implicit if (MAC[1+len_a] == 0xA3 && MAC[2+len_a] == 0x90) { int mfid = MAC[2+len_a]; UNUSED(mfid); int channel = (MAC[5+len_a] << 8) | MAC[6+len_a]; int sgroup = (MAC[7+len_a] << 8) | MAC[8+len_a]; long int freq = 0; fprintf (stderr, "\n MFID90 Group Regroup Channel Grant - Implicit"); fprintf (stderr, "\n CHAN [%04X] Group [%d][%04X]", channel, sgroup, sgroup); freq = process_channel_to_freq (opts, state, channel); //add active channel to string for ncurses display sprintf (state->active_channel[0], "MFID90 Active Ch: %04X SG: %d; ", channel, sgroup); state->last_active_time = time(NULL); for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == sgroup) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on MFID90 GRG -- block non-matching super group, allow matching group if (state->tg_hold != 0 && state->tg_hold != sgroup) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == sgroup) { sprintf (mode, "%s", "A"); opts->p25_is_tuned = 0; //unlock tuner } //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channel >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } //if playing back files, and we still want to see what freqs are in use in the ncurses terminal //might only want to do these on a grant update, and not a grant by itself? if (opts->p25_trunk == 0) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; } } //MFID90 Group Regroup Channel Grant - Explicit if (MAC[1+len_a] == 0xA4 && MAC[2+len_a] == 0x90) { int mfid = MAC[2+len_a]; int channel = (MAC[5+len_a] << 8) | MAC[6+len_a]; int channelr = (MAC[7+len_a] << 8) | MAC[8+len_a]; int sgroup = (MAC[9+len_a] << 8) | MAC[10+len_a]; long int freq = 0; UNUSED2(mfid, channelr); fprintf (stderr, "\n MFID90 Group Regroup Channel Grant - Explicit"); fprintf (stderr, "\n CHAN [%04X] Group [%d][%04X]", channel, sgroup, sgroup); freq = process_channel_to_freq (opts, state, channel); //add active channel to string for ncurses display sprintf (state->active_channel[0], "MFID90 Active Ch: %04X SG: %d ", channel, sgroup); state->last_active_time = time(NULL); for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == sgroup) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on MFID90 GRG -- block non-matching super group, allow matching group if (state->tg_hold != 0 && state->tg_hold != sgroup) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == sgroup) { sprintf (mode, "%s", "A"); opts->p25_is_tuned = 0; //unlock tuner } //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channel >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } //if playing back files, and we still want to see what freqs are in use in the ncurses terminal //might only want to do these on a grant update, and not a grant by itself? if (opts->p25_trunk == 0) { if (sgroup == state->lasttg || sgroup == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; } } } //MFID90 Group Regroup Channel Grant Update if (MAC[1+len_a] == 0xA5 && MAC[2+len_a] == 0x90) { int channel1 = (MAC[4+len_a] << 8) | MAC[5+len_a]; int group1 = (MAC[6+len_a] << 8) | MAC[7+len_a]; int channel2 = (MAC[8+len_a] << 8) | MAC[9+len_a]; int group2 = (MAC[10+len_a] << 8) | MAC[11+len_a]; long int freq1 = 0; long int freq2 = 0; fprintf (stderr, "\n MFID90 Group Regroup Channel Grant Update"); fprintf (stderr, "\n Channel 1 [%04X] Group 1 [%d][%04X]", channel1, group1, group1); freq1 = process_channel_to_freq (opts, state, channel1); fprintf (stderr, "\n Channel 2 [%04X] Group 2 [%d][%04X]", channel2, group2, group2); freq2 = process_channel_to_freq (opts, state, channel2); //add active channel to string for ncurses display sprintf (state->active_channel[0], "MFID90 Active Ch: %04X SG: %d; Ch: %04X SG: %d; ", channel1, group1, channel2, group2); state->last_active_time = time(NULL); //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //monstrocity below should get us evaluating and tuning groups...hopefully, will be first come first served though, no priority //see how many loops we need to run on when to tune if first group is blocked int loop = 1; if (channel1 == channel2) loop = 1; else loop = 2; //assigned inside loop long int tunable_freq = 0; int tunable_chan = 0; int tunable_group = 0; for (int j = 0; j < loop; j++) { //assign our internal variables for check down on if to tune one freq/group or not if (j == 0) { tunable_freq = freq1; tunable_chan = channel1; tunable_group = group1; } else { tunable_freq = freq2; tunable_chan = channel2; tunable_group = group2; } for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == tunable_group) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on MFID90 GRG -- block non-matching super group, allow matching group if (state->tg_hold != 0 && state->tg_hold != tunable_group) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == tunable_group) { sprintf (mode, "%s", "A"); opts->p25_is_tuned = 0; //unlock tuner } //check to see if the group candidate is blocked first if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) //DE is digital encrypted, B is block { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && tunable_freq != 0) //if we aren't already on a VC and have a valid frequency already { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[tunable_chan >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, tunable_freq); //probably best to only set these when really tuning state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); j = 8; //break loop } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, tunable_freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); j = 8; //break loop #endif } } } //if playing back files, and we still want to see what freqs are in use in the ncurses terminal //might only want to do these on a grant update, and not a grant by itself? if (opts->p25_trunk == 0) { if (tunable_group == state->lasttg || tunable_group == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = tunable_freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; } } } } //Standard P25 Tunable Commands //Group Voice Channel Grant (GRP_V_CH_GRANT) if (MAC[1+len_a] == 0x40) { int svc = MAC[2+len_a]; int channel = (MAC[3+len_a] << 8) | MAC[4+len_a]; int group = (MAC[5+len_a] << 8) | MAC[6+len_a]; int source = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a]; long int freq = 0; fprintf (stderr, "\n"); if (svc & 0x80) fprintf (stderr, " Emergency"); if (svc & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc & 0x20) fprintf (stderr, " Duplex"); if (svc & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc & 0x7); //call priority } fprintf (stderr, " Group Voice Channel Grant Update"); fprintf (stderr, "\n SVC [%02X] CHAN [%04X] Group [%d] Source [%d]", svc, channel, group, source); freq = process_channel_to_freq (opts, state, channel); //add active channel to string for ncurses display sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; ", channel, group); state->last_active_time = time(NULL); for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == group) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on GRP_V -- block non-matching group, allow matching group if (state->tg_hold != 0 && state->tg_hold != group) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == group) { sprintf (mode, "%s", "A"); opts->p25_is_tuned = 0; //unlock tuner } //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channel >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } //if playing back files, and we still want to see what freqs are in use in the ncurses terminal //might only want to do these on a grant update, and not a grant by itself? if (opts->p25_trunk == 0) { if (group == state->lasttg || group == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; } } } //Unit-to-Unit Voice Service Channel Grant (UU_V_CH_GRANT), or Grant Update (same format) if (MAC[1+len_a] == 0x44 || MAC[1+len_a] == 0x46) //double check these opcodes { int channel = (MAC[2+len_a] << 8) | MAC[3+len_a]; int target = (MAC[4+len_a] << 16) | (MAC[5+len_a] << 8) | MAC[6+len_a]; int source = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a]; long int freq = 0; fprintf (stderr, "\n Unit to Unit Channel Grant"); if ( MAC[1+len_a] == 0x46) fprintf (stderr, " Update"); fprintf (stderr, "\n CHAN [%04X] Source [%d] Target [%d]", channel, source, target); freq = process_channel_to_freq (opts, state, channel); //add active channel to string for ncurses display sprintf (state->active_channel[0], "Active Ch: %04X TGT: %d; ", channel, target); state->last_active_time = time(NULL); //Skip tuning private calls if private calls is disabled if (opts->trunk_tune_private_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled -- abb formats do not carry svc bits :( if (opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //enable, or disable? //unit to unit needs work, may fail under certain conditions (first blocked, second allowed, etc) (labels should still work though) for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == source || state->group_array[i].groupNumber == target) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on UU_V -- will want to disable UU_V grants while TG Hold enabled if (state->tg_hold != 0 && state->tg_hold != target) sprintf (mode, "%s", "B"); // if (state->tg_hold != 0 && state->tg_hold == target) // { // sprintf (mode, "%s", "A"); // opts->p25_is_tuned = 0; //unlock tuner // } //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channel >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq); if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq); if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } if (opts->p25_trunk == 0) { if (target == state->lasttg || target == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq; } } } //Group Voice Channel Grant Update Multiple - Explicit if (MAC[1+len_a] == 0x25) { int svc1 = MAC[2+len_a]; int channelt1 = (MAC[3+len_a] << 8) | MAC[4+len_a]; int channelr1 = (MAC[5+len_a] << 8) | MAC[6+len_a]; int group1 = (MAC[7+len_a] << 8) | MAC[8+len_a]; int svc2 = MAC[9+len_a]; int channelt2 = (MAC[10+len_a] << 8) | MAC[11+len_a]; int channelr2 = (MAC[12+len_a] << 8) | MAC[13+len_a]; int group2 = (MAC[14+len_a] << 8) | MAC[15+len_a]; long int freq1t = 0; long int freq1r = 0; long int freq2t = 0; UNUSED(freq1r); fprintf (stderr, "\n Group Voice Channel Grant Update Multiple - Explicit"); fprintf (stderr, "\n SVC [%02X] CHAN-T [%04X] CHAN-R [%04X] Group [%d][%04X]", svc1, channelt1, channelr1, group1, group1); if (svc1 & 0x80) fprintf (stderr, " Emergency"); if (svc1 & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc1 & 0x20) fprintf (stderr, " Duplex"); if (svc1 & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc1 & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc1 & 0x7); //call priority } freq1t = process_channel_to_freq (opts, state, channelt1); if (channelr1 != 0 && channelr1 != 0xFFFF) freq1r = process_channel_to_freq (opts, state, channelr1); fprintf (stderr, "\n SVC [%02X] CHAN-T [%04X] CHAN-R [%04X] Group [%d][%04X]", svc2, channelt2, channelr2, group2, group2); if (svc2 & 0x80) fprintf (stderr, " Emergency"); if (svc2 & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc2 & 0x20) fprintf (stderr, " Duplex"); if (svc2 & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc2 & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc2 & 0x7); //call priority } freq1t = process_channel_to_freq (opts, state, channelt2); if (channelr2 != 0 && channelr2 != 0xFFFF) freq1r = process_channel_to_freq (opts, state, channelr2); //add active channel to string for ncurses display sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; Ch: %04X TG: %d; ", channelt1, group1, channelt2, group2); state->last_active_time = time(NULL); //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled if ( (svc1 & 0x40) && (svc2 & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; int loop = 1; if (channelt2 == channelt2) loop = 1; else loop = 2; //assigned inside loop long int tunable_freq = 0; int tunable_chan = 0; int tunable_group = 0; for (int j = 0; j < loop; j++) { //test svc opts for enc to tune or skip if (j == 0) { if ( (svc1 & 0x40) && opts->trunk_tune_enc_calls == 0) j++; //skip to next } if (j == 1) { if (( svc2 & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //skip to end } //assign our internal variables for check down on if to tune one freq/group or not if (j == 0) { tunable_freq = freq1t; tunable_chan = channelt1; tunable_group = group1; } else { tunable_freq = freq2t; tunable_chan = channelt2; tunable_group = group2; } for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == tunable_group) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on GRP_V Multi -- block non-matching group, allow matching group if (state->tg_hold != 0 && state->tg_hold != tunable_group) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == tunable_group) { sprintf (mode, "%s", "A"); opts->p25_is_tuned = 0; //unlock tuner } //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && tunable_freq != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[tunable_chan >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, tunable_freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); j = 8; //break loop } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, tunable_freq); state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); j = 8; //break loop #endif } } } if (opts->p25_trunk == 0) { if (tunable_group == state->lasttg || tunable_group == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = tunable_freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; } } } } //Group Voice Channel Grant Update Multiple - Implicit if (MAC[1+len_a] == 0x05) { int so1 = MAC[2+len_a]; int channel1 = (MAC[3+len_a] << 8) | MAC[4+len_a]; int group1 = (MAC[5+len_a] << 8) | MAC[6+len_a]; int so2 = MAC[7+len_a]; int channel2 = (MAC[8+len_a] << 8) | MAC[9+len_a]; int group2 = (MAC[10+len_a] << 8) | MAC[11+len_a]; int so3 = MAC[12+len_a]; int channel3 = (MAC[13+len_a] << 8) | MAC[14+len_a]; int group3 = (MAC[15+len_a] << 8) | MAC[16+len_a]; long int freq1 = 0; long int freq2 = 0; long int freq3 = 0; fprintf (stderr, "\n Group Voice Channel Grant Update Multiple - Implicit"); fprintf (stderr, "\n Channel 1 [%04X] Group 1 [%d][%04X]", channel1, group1, group1); if (so1 & 0x80) fprintf (stderr, " Emergency"); if (so1 & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (so1 & 0x20) fprintf (stderr, " Duplex"); if (so1 & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (so1 & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", so1 & 0x7); //call priority } freq1 = process_channel_to_freq (opts, state, channel1); fprintf (stderr, "\n Channel 2 [%04X] Group 2 [%d][%04X]", channel2, group2, group2); if (so2 & 0x80) fprintf (stderr, " Emergency"); if (so2 & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (so2 & 0x20) fprintf (stderr, " Duplex"); if (so2 & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (so2 & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", so2 & 0x7); //call priority } freq2 = process_channel_to_freq (opts, state, channel2); fprintf (stderr, "\n Channel 3 [%04X] Group 3 [%d][%04X]", channel3, group3, group3); if (so3 & 0x80) fprintf (stderr, " Emergency"); if (so3 & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (so3 & 0x20) fprintf (stderr, " Duplex"); if (so3 & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (so3 & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", so3 & 0x7); //call priority } freq3 = process_channel_to_freq (opts, state, channel3); //add active channel to string for ncurses display sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; Ch: %04X TG: %d; Ch: %04X TG: %d; ", channel1, group1, channel2, group2, channel3, group3); state->last_active_time = time(NULL); //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled if ( (so1 & 0x40) && (so2 & 0x40) && (so3 & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; int loop = 3; long int tunable_freq = 0; int tunable_chan = 0; int tunable_group = 0; for (int j = 0; j < loop; j++) { //test svc opts for enc to tune or skip if (j == 0) { if ( (so1 & 0x40) && opts->trunk_tune_enc_calls == 0) j++; //skip to next } if (j == 1) { if ( (so2 & 0x40) && opts->trunk_tune_enc_calls == 0) j++; //skip to next } if (j == 2) { if ( (so3 & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //skip to end } //assign our internal variables for check down on if to tune one freq/group or not if (j == 0) { tunable_freq = freq1; tunable_chan = channel1; tunable_group = group1; } else if (j == 1) { tunable_freq = freq2; tunable_chan = channel2; tunable_group = group2; } else { tunable_freq = freq3; tunable_chan = channel3; tunable_group = group3; } for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == tunable_group) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on GRP_V Multi -- block non-matching group, allow matching group if (state->tg_hold != 0 && state->tg_hold != tunable_group) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == tunable_group) { sprintf (mode, "%s", "A"); opts->p25_is_tuned = 0; //unlock tuner } //check to see if the group candidate is blocked first if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) //DE is digital encrypted, B is block { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && tunable_freq != 0) //if we aren't already on a VC and have a valid frequency already { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[tunable_chan >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, tunable_freq); //probably best to only set these when really tuning state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); j = 8; //break loop } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, tunable_freq); //probably best to only set these when really tuning state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); j = 8; //break loop #endif } } } if (opts->p25_trunk == 0) { if (tunable_group == state->lasttg || tunable_group == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = tunable_freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; } } } } //Group Voice Channel Grant Update - Implicit if (MAC[1+len_a] == 0x42) { int channel1 = (MAC[2+len_a] << 8) | MAC[3+len_a]; int group1 = (MAC[4+len_a] << 8) | MAC[5+len_a]; int channel2 = (MAC[6+len_a] << 8) | MAC[7+len_a]; int group2 = (MAC[8+len_a] << 8) | MAC[9+len_a]; long int freq1 = 0; long int freq2 = 0; fprintf (stderr, "\n Group Voice Channel Grant Update - Implicit"); fprintf (stderr, "\n Channel 1 [%04X] Group 1 [%d][%04X]", channel1, group1, group1); freq1 = process_channel_to_freq (opts, state, channel1); fprintf (stderr, "\n Channel 2 [%04X] Group 2 [%d][%04X]", channel2, group2, group2); freq2 = process_channel_to_freq (opts, state, channel2); //add active channel to string for ncurses display sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; Ch: %04X TG: %d; ", channel1, group1, channel2, group2); state->last_active_time = time(NULL); //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled -- abb formats do not carry svc bits :( if (opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //enable, or disable? int loop = 1; if (channel1 == channel2) loop = 1; else loop = 2; //assigned inside loop long int tunable_freq = 0; int tunable_chan = 0; int tunable_group = 0; for (int j = 0; j < loop; j++) { //assign our internal variables for check down on if to tune one freq/group or not if (j == 0) { tunable_freq = freq1; tunable_chan = channel1; tunable_group = group1; } else { tunable_freq = freq2; tunable_chan = channel2; tunable_group = group2; } for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == tunable_group) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on GRP_V Multi -- block non-matching group, allow matching group if (state->tg_hold != 0 && state->tg_hold != tunable_group) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == tunable_group) { sprintf (mode, "%s", "A"); opts->p25_is_tuned = 0; //unlock tuner } //check to see if the group candidate is blocked first if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) //DE is digital encrypted, B is block { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && tunable_freq != 0) //if we aren't already on a VC and have a valid frequency already { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[tunable_chan >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, tunable_freq); //probably best to only set these when really tuning state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); j = 8; //break loop } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, tunable_freq); //probably best to only set these when really tuning state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); j = 8; //break loop #endif } } } if (opts->p25_trunk == 0) { if (tunable_group == state->lasttg || tunable_group == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = tunable_freq; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq; } } } } //Group Voice Channel Grant Update - Explicit if (MAC[1+len_a] == 0xC3) { int svc = MAC[2+len_a]; int channelt = (MAC[3+len_a] << 8) | MAC[4+len_a]; int channelr = (MAC[5+len_a] << 8) | MAC[6+len_a]; int group = (MAC[7+len_a] << 8) | MAC[8+len_a]; long int freq1 = 0; long int freq2 = 0; UNUSED(freq2); fprintf (stderr, "\n"); if (svc & 0x80) fprintf (stderr, " Emergency"); if (svc & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc & 0x20) fprintf (stderr, " Duplex"); if (svc & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc & 0x7); //call priority } fprintf (stderr, " Group Voice Channel Grant Update - Explicit"); fprintf (stderr, "\n SVC [%02X] CHAN-T [%04X] CHAN-R [%04X] Group [%d][%04X]", svc, channelt, channelr, group, group); freq1 = process_channel_to_freq (opts, state, channelt); if (channelr != 0 && channelr != 0xFFFF) freq2 = process_channel_to_freq (opts, state, channelr); //one system had this as channel 0xFFFF -- look up any particular meaning for that //don't set the tg here, one multiple grant updates, will mess up the TG value on current call // if (slot == 0) // { // state->lasttg = group; // } // else state->lasttgR = group; for (int i = 0; i < state->group_tally; i++) { if (state->group_array[i].groupNumber == group) { fprintf (stderr, " [%s]", state->group_array[i].groupName); strcpy (mode, state->group_array[i].groupMode); break; } } //TG hold on GRP_V Exp -- block non-matching group, allow matching group if (state->tg_hold != 0 && state->tg_hold != group) sprintf (mode, "%s", "B"); if (state->tg_hold != 0 && state->tg_hold == group) { sprintf (mode, "%s", "A"); opts->p25_is_tuned = 0; //unlock tuner } //Skip tuning group calls if group calls are disabled if (opts->trunk_tune_group_calls == 0) goto SKIPCALL; //Skip tuning encrypted calls if enc calls are disabled if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //tune if tuning available if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) { //reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq1 != 0) //if we aren't already on a VC and have a valid frequency { //changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK if (1 == 1) { if (state->p25_chan_tdma[channelt >> 12] == 1) { state->samplesPerSymbol = 8; state->symbolCenter = 3; } } //rigctl if (opts->use_rigctl == 1) { if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); SetFreq(opts->rigctl_sockfd, freq1); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop state->last_vc_sync_time = time(NULL); } //rtl else if (opts->audio_in_type == 3) { #ifdef USE_RTLSDR rtl_dev_tune (opts, freq1); state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; opts->p25_is_tuned = 1; state->last_vc_sync_time = time(NULL); #endif } } } if (opts->p25_trunk == 0) { if (group == state->lasttg || group == state->lasttgR) { //P1 FDMA if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq1; //P2 TDMA else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1; } } } //SNDCP Data Channel Announcement if (MAC[1+len_a] == 0xD6) { fprintf (stderr, "\n SNDCP Data Channel Announcement "); } //MFID90 Group Regroup Add Command if (MAC[1+len_a] == 0x81 && MAC[2+len_a] == 0x90) //needs MAC message len update, may work same as explicit enc regroup? { fprintf (stderr, "\n MFID90 Group Regroup Add Command "); } //TODO: Fix These two commented out //Authentication Response - Abbreviated // if (MAC[1+len_a] == 0x78) // { // int source = (MAC[8+len_a] << 16) | (MAC[9+len_a] << 8) | MAC[10+len_a]; // fprintf (stderr, "\n Authentication Response - Abbreviated \n"); // fprintf (stderr, " Source [%08d][%06X] ", source, source); // } //Authentication Response - Extended // if (MAC[1+len_a] == 0xF8) // { // //only partial data will print on this, do we really care about the SUID? // int source = (MAC[5+len_a] << 16) | (MAC[6+len_a] << 8) | MAC[7+len_a]; // fprintf (stderr, "\n Authentication Response - Extended \n"); // fprintf (stderr, " Source [%08d][%06X] ", source, source); // } //System Service Broadcast if (MAC[1+len_a] == 0x78) { int SSA = (MAC[3+len_a] << 16) | (MAC[4+len_a] << 8) | MAC[5+len_a]; int SSS = (MAC[6+len_a] << 16) | (MAC[7+len_a] << 8) | MAC[8+len_a]; int RPL = MAC[9+len_a]; fprintf (stderr, "\n System Service Broadcast - Abbreviated \n"); fprintf (stderr, " SSA: %06X; SSS: %06X; RPL: %02X", SSA, SSS, RPL); } //RFSS Status Broadcast - Implicit if (MAC[1+len_a] == 0x7A) { int lra = MAC[2+len_a]; int lsysid = ((MAC[3+len_a] & 0xF) << 8) | MAC[4+len_a]; int rfssid = MAC[5+len_a]; int siteid = MAC[6+len_a]; int channel = (MAC[7+len_a] << 8) | MAC[8+len_a]; int sysclass = MAC[9+len_a]; fprintf (stderr, "\n RFSS Status Broadcast - Implicit \n"); fprintf (stderr, " LRA [%02X] SYSID [%03X] RFSS ID [%03d] SITE ID [%03d] CHAN [%04X] SSC [%02X] ", lra, lsysid, rfssid, siteid, channel, sysclass); process_channel_to_freq (opts, state, channel); state->p2_siteid = siteid; state->p2_rfssid = rfssid; } //RFSS Status Broadcast - Explicit if (MAC[1+len_a] == 0xFA) { int lra = MAC[2+len_a]; int lsysid = ((MAC[3+len_a] & 0xF) << 8) | MAC[4+len_a]; int rfssid = MAC[5+len_a]; int siteid = MAC[6+len_a]; int channelt = (MAC[7+len_a] << 8) | MAC[8+len_a]; int channelr = (MAC[9+len_a] << 8) | MAC[10+len_a]; int sysclass = MAC[11+len_a]; fprintf (stderr, "\n RFSS Status Broadcast - Explicit \n"); fprintf (stderr, " LRA [%02X] SYSID [%03X] RFSS ID [%03d] SITE ID [%03d]\n CHAN-T [%04X] CHAN-R [%02X] SSC [%02X] ", lra, lsysid, rfssid, siteid, channelt, channelr, sysclass); process_channel_to_freq (opts, state, channelt); process_channel_to_freq (opts, state, channelr); state->p2_siteid = siteid; state->p2_rfssid = rfssid; } //Unit-to-Unit Answer Request (UU_ANS_REQ) if (MAC[1+len_a] == 0x45 && MAC[2+len_a] != 0x90) { int svc = MAC[2+len_a]; int answer = MAC[3+len_a]; int target = (MAC[4+len_a] << 16) | (MAC[5+len_a] << 8) | MAC[6+len_a]; int source = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a]; fprintf (stderr, "\n Unit to Unit Channel Answer Request"); fprintf (stderr, "\n SVC [%02X] Answer [%02X] Source [%d] Target [%d]", svc, answer, source, target); } //Telephone Interconnect Voice Channel Grant (TELE_INT_CH_GRANT) //look at PDU for this, see if this is tunable // if (MAC[1+len_a] == 0x48 && MAC[2+len_a] != 0x90) // { // fprintf (stderr, "\n Telephone Interconnect Voice Channel Grant "); // } // //Telephone Interconnect Voice Channel Grant Update (TELE_INT_CH_GRANT_UPDT) // if (MAC[1+len_a] == 0x49 && MAC[2+len_a] != 0x90) // { // fprintf (stderr, "\n Telephone Interconnect Voice Channel Grant Update "); // } //TODO: Restructure this function to group standard Opcodes away from MFID 90 and MFID A4, and Unknown MFID //or just go to if-elseif-else layout (probably easier that way) //Unknown Harris A4 Opcodes if (MAC[1+len_a] != 0xB0 && MAC[2+len_a] == 0xA4) { // 6.2.36 Manufacturer Specific regarding octet 3 as len int len = MAC[3+len_a] & 0x3F; int res = MAC[3+len_a] >> 6; //sanity check that we don't exceed the max MAC array size if (len > 24) len = 24; //should never exceed this len, but just in case it does //sanity check that we don't pick this up in a second message and exceed the MAC array // if ( (len + len_a) > 24) len = 24-len_a; //not required, since we can only go to 24 anyways //end sanity checks fprintf (stderr, "\n MFID A4 (Harris); Res: %d; Len: %d; Opcode: %02llX; ", res, len, MAC[1+len_a]); for (i = 1; i < len; i++) fprintf (stderr, "%02llX", MAC[i+len_a]); } /* Maybe this is why some of these SYNC_BCST PDUs have zeroes in most fields Information provided in the SYNC_BCST message may be used for purposes other than providing synchronization to a TDMA voice channel. These purposes are beyond the scope of this document. SUs not interested in synchronization with the TDMA voice channel may ignore the status of the US bit. */ //Synchronization Broadcast (SYNC_BCST) if (MAC[1+len_a] == 0x70) { fprintf (stderr, "\n Synchronization Broadcast \n"); int ist = (MAC[3+len_a] >> 2) & 0x1; //IST bit tells us if time is realiable, synced to external source int ltoff = (MAC[4+len_a] & 0x3F); int year = MAC[5+len_a] >> 1; int month = ((MAC[5+len_a] & 0x1) << 3) | (MAC[6+len_a] >> 5); int day = (MAC[6+len_a] & 0x1F); int hour = MAC[7+len_a] >> 3; int min = ((MAC[7+len_a] & 0x7) << 3) | (MAC[8+len_a] >> 5); int slots = ((MAC[8+len_a] & 0x1F) << 8) | MAC[9+len_a]; int sign = (ltoff & 0b100000) >> 5; float offhour = 0; //calculate local time (on system) by looking at offset and subtracting 30 minutes increments, or divide by 2 for hourly if (sign == 1) { offhour = -( (ltoff & 0b11111 ) / 2); } else offhour = ( (ltoff & 0b11111 ) / 2); int seconds = slots / 135; //very rough estimation, but may be close enough for grins if (seconds > 59) seconds = 59; //sanity check for rounding error fprintf (stderr, " Date: 20%02d.%02d.%02d Time: %02d:%02d:%02d UTC\n", year, month, day, hour, min, seconds); fprintf (stderr, " Local Time Offset: %.01f Hours;", offhour); //if ist bit is set, then time on system may be considered invalid (i.e., no external time sync) if (ist == 1) { fprintf (stderr, " Invalid System Time "); } else fprintf (stderr, " Valid System Time "); } //identifier update VHF/UHF if (MAC[1+len_a] == 0x74) { state->p25_chan_iden = MAC[2+len_a] >> 4; int iden = state->p25_chan_iden; int bw_vu = (MAC[2+len_a] & 0xF); state->p25_trans_off[iden] = (MAC[3+len_a] << 6) | (MAC[4+len_a] >> 2); state->p25_chan_spac[iden] = ((MAC[4+len_a] & 0x3) << 8) | MAC[5+len_a]; state->p25_base_freq[iden] = (MAC[6+len_a] << 24) | (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | (MAC[9+len_a] << 0); //this is causing more issues -- need a different way to check on this // if (state->p25_chan_spac[iden] == 0x64) //tdma // { // state->p25_chan_type[iden] = 4; // // state->p25_chan_tdma[iden] = 1; // // } // else //fdma // { // state->p25_chan_type[iden] = 1; // // state->p25_chan_tdma[iden] = 0; // // } state->p25_chan_type[iden] = 1; //set as old values for now state->p25_chan_tdma[iden] = 0; //set as old values for now fprintf (stderr, "\n Identifier Update UHF/VHF\n"); fprintf (stderr, " Channel Identifier [%01X] BW [%01X] Transmit Offset [%04X]\n Channel Spacing [%03X] Base Frequency [%08lX] [%09ld]", state->p25_chan_iden, bw_vu, state->p25_trans_off[iden], state->p25_chan_spac[iden], state->p25_base_freq[iden], state->p25_base_freq[iden] * 5); } //identifier update (Non-TDMA 6.2.22) (Non-VHF-UHF) //with signed offset, bit trans_off >> 8; bit number 9 if (MAC[1+len_a] == 0x7D) { state->p25_chan_iden = MAC[2+len_a] >> 4; int iden = state->p25_chan_iden; state->p25_chan_type[iden] = 1; state->p25_chan_tdma[iden] = 0; int bw = ((MAC[2+len_a] & 0xF) << 5) | ((MAC[3+len_a] & 0xF8) >> 2); state->p25_trans_off[iden] = (MAC[3+len_a] << 6) | (MAC[4+len_a] >> 2); state->p25_chan_spac[iden] = ((MAC[4+len_a] & 0x3) << 8) | MAC[5+len_a]; state->p25_base_freq[iden] = (MAC[6+len_a] << 24) | (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | (MAC[9+len_a] << 0); fprintf (stderr, "\n Identifier Update (8.3.1.23)\n"); fprintf (stderr, " Channel Identifier [%01X] BW [%01X] Transmit Offset [%04X]\n Channel Spacing [%03X] Base Frequency [%08lX] [%09ld]", state->p25_chan_iden, bw, state->p25_trans_off[iden], state->p25_chan_spac[iden], state->p25_base_freq[iden], state->p25_base_freq[iden] * 5); } //identifier update for TDMA, Abbreviated if (MAC[1+len_a] == 0x73) { state->p25_chan_iden = MAC[2+len_a] >> 4; int iden = state->p25_chan_iden; state->p25_chan_tdma[iden] = 1; state->p25_chan_type[iden] = MAC[2+len_a] & 0xF; state->p25_trans_off[iden] = (MAC[3+len_a] << 6) | (MAC[4+len_a] >> 2); state->p25_chan_spac[iden] = ((MAC[4+len_a] & 0x3) << 8) | MAC[5+len_a]; state->p25_base_freq[iden] = (MAC[6+len_a] << 24) | (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | (MAC[9+len_a] << 0); fprintf (stderr, "\n Identifier Update for TDMA - Abbreviated\n"); fprintf (stderr, " Channel Identifier [%01X] Channel Type [%01X] Transmit Offset [%04X]\n Channel Spacing [%03X] Base Frequency [%08lX] [%09ld]", state->p25_chan_iden, state->p25_chan_type[iden], state->p25_trans_off[iden], state->p25_chan_spac[iden], state->p25_base_freq[iden], state->p25_base_freq[iden] * 5); } //identifier update for TDMA, Extended if (MAC[1+len_a] == 0xF3) { state->p25_chan_iden = MAC[3+len_a] >> 4; int iden = state->p25_chan_iden; state->p25_chan_tdma[iden] = 1; state->p25_chan_type[iden] = MAC[3+len_a] & 0xF; state->p25_trans_off[iden] = (MAC[4+len_a] << 6) | (MAC[5+len_a] >> 2); state->p25_chan_spac[iden] = ((MAC[5+len_a] & 0x3) << 8) | MAC[6+len_a]; state->p25_base_freq[iden] = (MAC[7+len_a] << 24) | (MAC[8+len_a] << 16) | (MAC[9+len_a] << 8) | (MAC[10+len_a] << 0); int lwacn = (MAC[11+len_a] << 12) | (MAC[12+len_a] << 4) | ((MAC[13+len_a] & 0xF0) >> 4); int lsysid = ((MAC[13+len_a] & 0xF) << 8) | MAC[14+len_a]; fprintf (stderr, "\n Identifier Update for TDMA - Extended\n"); fprintf (stderr, " Channel Identifier [%01X] Channel Type [%01X] Transmit Offset [%04X]\n Channel Spacing [%03X] Base Frequency [%08lX] [%09ld]", state->p25_chan_iden, state->p25_chan_type[iden], state->p25_trans_off[iden], state->p25_chan_spac[iden], state->p25_base_freq[iden], state->p25_base_freq[iden] * 5); fprintf (stderr, "\n WACN [%04X] SYSID [%04X]", lwacn, lsysid); } //Secondary Control Channel Broadcast, Explicit if (MAC[1+len_a] == 0xE9) { int rfssid = MAC[2+len_a]; int siteid = MAC[3+len_a]; int channelt = (MAC[4+len_a] << 8) | MAC[5+len_a]; int channelr = (MAC[6+len_a] << 8) | MAC[7+len_a]; int sysclass = MAC[8+len_a]; if (1 == 1) //state->p2_is_lcch == 1 { fprintf (stderr, "\n Secondary Control Channel Broadcast - Explicit\n"); fprintf (stderr, " RFSS [%03d] SITE ID [%03d] CHAN-T [%04X] CHAN-R [%04X] SSC [%02X]", rfssid, siteid, channelt, channelr, sysclass); process_channel_to_freq (opts, state, channelt); process_channel_to_freq (opts, state, channelr); } state->p2_siteid = siteid; state->p2_rfssid = rfssid; } //Secondary Control Channel Broadcast, Implicit if (MAC[1+len_a] == 0x79) { int rfssid = MAC[2+len_a]; int siteid = MAC[3+len_a]; int channel1 = (MAC[4+len_a] << 8) | MAC[5+len_a]; int sysclass1 = MAC[6+len_a]; int channel2 = (MAC[7+len_a] << 8) | MAC[8+len_a]; int sysclass2 = MAC[9+len_a]; long int freq1 = 0; long int freq2 = 0; if (1 == 1) //state->p2_is_lcch == 1 { fprintf (stderr, "\n Secondary Control Channel Broadcast - Implicit\n"); fprintf (stderr, " RFSS[%03d] SITE ID [%03d] CHAN1 [%04X] SSC [%02X] CHAN2 [%04X] SSC [%02X]", rfssid, siteid, channel1, sysclass1, channel2, sysclass2); freq1 = process_channel_to_freq (opts, state, channel1); freq2 = process_channel_to_freq (opts, state, channel2); } //place the cc freq into the list at index 0 if 0 is empty so we can hunt for rotating CCs without user LCN list if (state->trunk_lcn_freq[1] == 0) { state->trunk_lcn_freq[1] = freq1; state->trunk_lcn_freq[2] = freq2; state->lcn_freq_count = 3; //increment to three } state->p2_siteid = siteid; state->p2_rfssid = rfssid; } //MFID90 Group Regroup Voice Channel User - Abbreviated if (MAC[1+len_a] == 0x80 && MAC[2+len_a] == 0x90) { int gr = (MAC[4+len_a] << 8) | MAC[5+len_a]; int src = (MAC[6+len_a] << 16) | (MAC[7+len_a] << 8) | MAC[8+len_a]; fprintf (stderr, "\n VCH %d - Super Group %d SRC %d ", slot, gr, src); fprintf (stderr, "MFID90 Group Regroup Voice"); if (slot == 0) { state->lasttg = gr; if (src != 0) state->lastsrc = src; } else { state->lasttgR = gr; if (src != 0) state->lastsrcR = src; } } //MFID90 Group Regroup Voice Channel User - Extended if (MAC[1+len_a] == 0xA0 && MAC[2+len_a] == 0x90) { int gr = (MAC[5+len_a] << 8) | MAC[6+len_a]; int src = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a]; fprintf (stderr, "\n VCH %d - Super Group %d SRC %d ", slot, gr, src); fprintf (stderr, "MFID90 Group Regroup Voice"); if (slot == 0) { state->lasttg = gr; if (src != 0) state->lastsrc = src; } else { state->lasttgR = gr; if (src != 0) state->lastsrcR = src; } } //MFIDA4 Group Regroup Explicit Encryption Command if (MAC[1+len_a] == 0xB0 && MAC[2+len_a] == 0xA4) //&& MAC[2+len_a] == 0xA4 { int len_grg = MAC[3+len_a] & 0x3F; //MFID Len in Octets int grg = MAC[4+len_a] >> 5; //3 bits //TIA-102.AABH 4.3.1.1 GRG_Options int ssn = MAC[4+len_a] & 0x1F; //5 bits fprintf (stderr, "\n MFID A4 Group Regroup Explicit Encryption Command\n"); // if (len_grg) fprintf (stderr, " Len: %02d", len_grg); //debug if (grg & 3) fprintf (stderr, " Simulselect"); //one-way regroup else fprintf (stderr, " Patch"); //two-way regroup if (grg & 1) fprintf (stderr, " Active"); //activated else fprintf (stderr, " Inactive"); //deactivated fprintf (stderr, " SSN: %02d \n", ssn); if ( (grg & 0x2) == 2) //group WGID to supergroup { int sg = (MAC[5+len_a] << 8) | MAC[6+len_a]; int key = (MAC[7+len_a] << 8) | MAC[8+len_a]; int alg = MAC[9+len_a]; int t1 = (MAC[10+len_a] << 8) | MAC[11+len_a]; int t2 = (MAC[12+len_a] << 8) | MAC[13+len_a]; int t3 = (MAC[14+len_a] << 8) | MAC[15+len_a]; int t4 = (MAC[16+len_a] << 8) | MAC[17+len_a]; UNUSED4(t1, t2, t3, t4); fprintf (stderr, " SG: %d; KEY: %04X; ALG: %02X;\n ", sg, key, alg); int a = 0; int wgid = 0; //sanity check // if ((len_grg + len_a > 20)) len_grg = 20 - len_a; for (int i = 10; i < len_grg;) { //failsafe to prevent oob array if ( (i + len_a) > 20) { goto END_PDU; } wgid = (MAC[10+len_a+a] << 8) | MAC[11+len_a+a]; fprintf (stderr, "WGID: %d; ", wgid); a = a + 2; i = i + 2; } } else if ( (grg & 0x2) == 0) //individual WUID to supergroup { int sg = (MAC[5+len_a] << 8) | MAC[6+len_a]; int key = (MAC[7+len_a] << 8) | MAC[8+len_a]; int t1 = (MAC[9+len_a] << 16) | (MAC[10+len_a] << 8) | MAC[11+len_a]; int t2 = (MAC[12+len_a] << 16) | (MAC[13+len_a] << 8) | MAC[14+len_a]; int t3 = (MAC[15+len_a] << 16) | (MAC[16+len_a] << 8) | MAC[17+len_a]; fprintf (stderr, " SG: %d KEY: %04X", sg, key); fprintf (stderr, " WUID: %d; WUID: %d; WUID: %d; ", t1, t2, t3); } } //1 or 21, group voice channel message, abb and ext if (MAC[1+len_a] == 0x1 || MAC[1+len_a] == 0x21) { int svc = MAC[2+len_a]; int gr = (MAC[3+len_a] << 8) | MAC[4+len_a]; int src = (MAC[5+len_a] << 16) | (MAC[6+len_a] << 8) | MAC[7+len_a]; fprintf (stderr, "\n VCH %d - TG %d SRC %d ", slot, gr, src); if (svc & 0x80) fprintf (stderr, " Emergency"); if (svc & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc & 0x20) fprintf (stderr, " Duplex"); if (svc & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc & 0x7); //call priority } fprintf (stderr, " Group Voice"); sprintf (state->call_string[slot], " Group "); if (svc & 0x80) strcat (state->call_string[slot], " Emergency "); else if (svc & 0x40) strcat (state->call_string[slot], " Encrypted "); else strcat (state->call_string[slot], " "); if (slot == 0) { state->lasttg = gr; if (src != 0) state->lastsrc = src; } else { state->lasttgR = gr; if (src != 0) state->lastsrcR = src; } } //1 or 21, group voice channel message, abb and ext if (MAC[1+len_a] == 0x2 || MAC[1+len_a] == 0x22) { int svc = MAC[2+len_a]; int gr = (MAC[3+len_a] << 16) | (MAC[4+len_a] << 8) | MAC[5+len_a]; int src = (MAC[6+len_a] << 16) | (MAC[7+len_a] << 8) | MAC[8+len_a]; fprintf (stderr, "\n VCH %d - TG %d SRC %d ", slot, gr, src); if (svc & 0x80) fprintf (stderr, " Emergency"); if (svc & 0x40) fprintf (stderr, " Encrypted"); if (opts->payload == 1) //hide behind payload due to len { if (svc & 0x20) fprintf (stderr, " Duplex"); if (svc & 0x10) fprintf (stderr, " Packet"); else fprintf (stderr, " Circuit"); if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on fprintf (stderr, " Priority %d", svc & 0x7); //call priority } fprintf (stderr, " Unit to Unit Voice"); sprintf (state->call_string[slot], " Private "); if (svc & 0x80) strcat (state->call_string[slot], " Emergency "); else if (svc & 0x40) strcat (state->call_string[slot], " Encrypted "); else strcat (state->call_string[slot], " "); if (slot == 0) { state->lasttg = gr; if (src != 0) state->lastsrc = src; } else { state->lasttgR = gr; if (src != 0) state->lastsrcR = src; } } //network status broadcast, abbreviated if (MAC[1+len_a] == 0x7B) { int lra = MAC[2+len_a]; int lwacn = (MAC[3+len_a] << 12) | (MAC[4+len_a] << 4) | ((MAC[5+len_a] & 0xF0) >> 4); int lsysid = ((MAC[5+len_a] & 0xF) << 8) | MAC[6+len_a]; int channel = (MAC[7+len_a] << 8) | MAC[8+len_a]; int sysclass = MAC[9+len_a]; int lcolorcode = ((MAC[10+len_a] & 0xF) << 8) | MAC[11+len_a]; UNUSED(sysclass); fprintf (stderr, "\n Network Status Broadcast - Abbreviated \n"); fprintf (stderr, " LRA [%02X] WACN [%05X] SYSID [%03X] NAC [%03X] CHAN-T [%04X]", lra, lwacn, lsysid, lcolorcode, channel); state->p25_cc_freq = process_channel_to_freq (opts, state, channel); state->p25_cc_is_tdma = 1; //flag on for CC tuning purposes when system is qpsk if (state->p2_hardset == 0 ) //state->p2_is_lcch == 1 shim until CRC is working, prevent bogus data { state->p2_wacn = lwacn; state->p2_sysid = lsysid; state->p2_cc = lcolorcode; } //place the cc freq into the list at index 0 if 0 is empty, or not the same, //so we can hunt for rotating CCs without user LCN list if (state->trunk_lcn_freq[0] == 0 || state->trunk_lcn_freq[0] != state->p25_cc_freq) { state->trunk_lcn_freq[0] = state->p25_cc_freq; } } //network status broadcast, extended if (MAC[1+len_a] == 0xFB) { int lra = MAC[2+len_a]; int lwacn = (MAC[3+len_a] << 12) | (MAC[4+len_a] << 4) | ((MAC[5+len_a] & 0xF0) >> 4); int lsysid = ((MAC[5+len_a] & 0xF) << 8) | MAC[6+len_a]; int channelt = (MAC[7+len_a] << 8) | MAC[8+len_a]; int channelr = (MAC[9+len_a] << 8) | MAC[10+len_a]; int sysclass = MAC[9+len_a]; int lcolorcode = ((MAC[12+len_a] & 0xF) << 8) | MAC[13+len_a]; UNUSED(sysclass); fprintf (stderr, "\n Network Status Broadcast - Extended \n"); fprintf (stderr, " LRA [%02X] WACN [%05X] SYSID [%03X] NAC [%03X] CHAN-T [%04X] CHAN-R [%04X]", lra, lwacn, lsysid, lcolorcode, channelt, channelr); state->p25_cc_freq = process_channel_to_freq (opts, state, channelt); process_channel_to_freq (opts, state, channelr); state->p25_cc_is_tdma = 1; //flag on for CC tuning purposes when system is qpsk if (state->p2_hardset == 0 ) //state->p2_is_lcch == 1 shim until CRC is working, prevent bogus data { state->p2_wacn = lwacn; state->p2_sysid = lsysid; state->p2_cc = lcolorcode; } } //Adjacent Status Broadcast, abbreviated if (MAC[1+len_a] == 0x7C) { int lra = MAC[2+len_a]; int cfva = MAC[3+len_a] >> 4; int lsysid = ((MAC[3+len_a] & 0xF) << 8) | MAC[4+len_a]; int rfssid = MAC[5+len_a]; int siteid = MAC[6+len_a]; int channelt = (MAC[7+len_a] << 8) | MAC[8+len_a]; int sysclass = MAC[9+len_a]; fprintf (stderr, "\n Adjacent Status Broadcast - Abbreviated\n"); fprintf (stderr, " LRA [%02X] RFSS[%03d] SITE [%03d] SYSID [%03X] CHAN-T [%04X] SSC [%02X]\n ", lra, rfssid, siteid, lsysid, channelt, sysclass); if (cfva & 0x8) fprintf (stderr, " Conventional"); if (cfva & 0x4) fprintf (stderr, " Failure Condition"); if (cfva & 0x2) fprintf (stderr, " Up to Date (Correct)"); else fprintf (stderr, " Last Known"); if (cfva & 0x1) fprintf (stderr, " Valid RFSS Connection Active"); process_channel_to_freq (opts, state, channelt); } //Adjacent Status Broadcast, extended if (MAC[1+len_a] == 0xFC) { int lra = MAC[2+len_a]; int cfva = MAC[3+len_a] >> 4; int lsysid = ((MAC[3+len_a] & 0xF) << 8) | MAC[4+len_a]; int rfssid = MAC[5+len_a]; int siteid = MAC[6+len_a]; int channelt = (MAC[7+len_a] << 8) | MAC[8+len_a]; int channelr = (MAC[9+len_a] << 8) | MAC[10+len_a]; int sysclass = MAC[11+len_a]; //need to re-check this fprintf (stderr, "\n Adjacent Status Broadcast - Extended\n"); fprintf (stderr, " LRA [%02X] RFSS[%03d] SITE [%03d] SYSID [%03X] CHAN-T [%04X] CHAN-R [%04X] SSC [%02X]\n ", lra, rfssid, siteid, lsysid, channelt, channelr, sysclass); if (cfva & 0x8) fprintf (stderr, " Conventional"); if (cfva & 0x4) fprintf (stderr, " Failure Condition"); if (cfva & 0x2) fprintf (stderr, " Up to Date (Correct)"); else fprintf (stderr, " Last Known"); if (cfva & 0x1) fprintf (stderr, " Valid RFSS Connection Active"); process_channel_to_freq (opts, state, channelt); process_channel_to_freq (opts, state, channelr); } SKIPCALL: ; //do nothing if ( (len_b + len_c) < 24 && len_c != 0) { len_a = len_b; } else { goto END_PDU; } } END_PDU: state->p2_is_lcch = 0; //debug printing if (opts->payload == 1 && MAC[1] != 0) //print only if not a null type //&& MAC[1] != 0 //&& MAC[2] != 0 { fprintf (stderr, "%s", KCYN); fprintf (stderr, "\n P25 PDU Payload\n "); for (int i = 0; i < 24; i++) { fprintf (stderr, "[%02llX]", MAC[i]); if (i == 11) fprintf (stderr, "\n "); } fprintf (stderr, "%s", KNRM); } }