GitHub/dsd-fme
1
0
Fork 0
mirror of https://github.com/lwvmobile/dsd-fme.git synced 2026-11-13 01:07:24 -05:00
Code Issues Packages Projects Releases Wiki Activity
Files
4bcc9f8aecce4292a475eee470def141ca8836fb
dsd-fme/src/p25p2_vpdu.c
lwvmobile f85304471f Event History Setup: #287 
P25p2: Misc Tweaks for Harris Things; Misc Event History P2 Tweaks;
2025-05-11 12:08:39 -04:00

2493 lines
91 KiB
C
Raw Blame History

/*-------------------------------------------------------------------------------
* p25p2_vpdu.c
* Phase 2 Variable PDU (and TSBK PDU) Handling
*
* LWVMOBILE
* 2022-10 DSD-FME Florida Man Edition
*-----------------------------------------------------------------------------*/
#include "dsd.h"
//MAC message lengths
static const uint8_t mac_msg_len[256] = {
0, 7, 8, 7, 0, 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //0F
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //1F
0, 14, 15, 0, 0, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //2F
5, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //3F
9, 7, 9, 0, 9, 8, 9, 0, 10, 10, 9, 0, 10, 0, 0, 0, //4F
0, 0, 0, 0, 9, 7, 0, 0, 10, 0, 7, 0, 10, 8, 14, 7, //5F //reverted previous changes here
9, 9, 0, 0, 9, 0, 0, 9, 10, 0, 7, 10, 10, 7, 0, 9, //6F
9, 29, 9, 9, 9, 9, 10, 13, 9, 9, 9, 11, 9, 9, 0, 0, //7F
8, 18, 0, 7, 11, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 7, //8F (needed to add 81 and 8f for Harris)
0, 17, 0, 0, 0, 17, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //9F // 0x91 and 0x95 manualy set to 17 (moto)
16, 0, 0, 11, 13, 11, 11, 11, 10, 0, 0, 0, 0, 0, 0, 0, //AF
17, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, //BF, B0 was 0, set to 17 (Harris again), B5 Tait 0, set to 5
11, 0, 0, 8, 15, 12, 15, 32, 12, 12, 0, 27, 14, 29, 29, 32, //CF
0, 0, 0, 0, 0, 0, 9, 0, 14, 29, 11, 27, 14, 0, 40, 11, //DF
28, 0, 0, 14, 17, 14, 0, 0, 16, 8, 11, 0, 13, 19, 0, 0, //EF
0, 0, 16, 14, 0, 0, 12, 0, 22, 0, 11, 13, 11, 0, 15, 0 }; //FF
//MAC PDU 3-bit Opcodes BBAC (8.4.1) p 123:
//0 - reserved //1 - Mac PTT //2 - Mac End PTT //3 - Mac Idle //4 - Mac Active
//5 - reserved //6 - Mac Hangtime //7 - reserved //Mac PTT BBAC p80
//TODO: Check for Non standard MFIDs first MAC[1], then set len on the MAC[2] if
//the result from the len table is 0 (had to manually enter a few observed values from Harris)
void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned long long int MAC[24])
{
//handle variable content MAC PDUs (Active, Idle, Hangtime, or Signal)
//use type to specify SACCH or FACCH, so we know if we should invert the currentslot when assigning ids etc
//b values - 0 = Unique TDMA Message, 1 Phase 1 OSP/ISP abbreviated
// 2 = Manufacturer Message, 3 Phase 1 OSP/ISP extended/explicit
int len_a = 0;
int len_b = mac_msg_len[MAC[1]];
int len_c = 0;
//sanity check
if (len_b < 19 && type == 1)
{
len_c = mac_msg_len[MAC[1+len_b]];
}
if (len_b < 16 && type == 0)
{
len_c = mac_msg_len[MAC[1+len_b]];
}
int slot = 9;
if (type == 1) //0 for F, 1 for S
{
slot = (state->currentslot ^ 1) & 1; //flip slot internally for SACCH
}
else slot = state->currentslot;
//assigning here if OECI MAC SIGNAL, after passing RS and CRC
if (state->p2_is_lcch == 1)
{
//fix for blinking SIGNAL on Slot 2 during inverted slot in Ncurses
//TEMP: assume LCH 0 is the SIGNAL slot, fix for blinking SIGNAL on Slot 2 during inverted slot
if (type == 0 && slot == 0) state->dmrburstL = 30;
if (type == 1 && slot == 0) state->dmrburstL = 30;
// if (type == 0 && slot == 1) state->dmrburstR = 30;
// if (type == 1 && slot == 1) state->dmrburstR = 30;
//Temp Fix: Disable Slot Playback when MAC_SIGNAL present (good CRC),
//during trunking, will re-enable when call grant is received, prevent lagging:
if (opts->p25_trunk == 1 && opts->p25_is_tuned == 0) opts->slot1_on = 0;
if (opts->p25_trunk == 1 && opts->p25_is_tuned == 0) opts->slot2_on = 0;
//TODO: Iron out issues with audio playing in every non SACCH slot when no voice present
//without it stuttering during actual voice
}
if (len_b == 0 || len_b > 18)
{
goto END_PDU;
}
//group list mode so we can look and see if we need to block tuning any groups, etc
char mode[8]; //allow, block, digital, enc, etc
sprintf (mode, "%s", "");
//if we are using allow/whitelist mode, then write 'B' to mode for block
//comparison below will look for an 'A' to write to mode if it is allowed
if (opts->trunk_use_allow_list == 1) sprintf (mode, "%s", "B");
for (int i = 0; i < 2; i++)
{
//MFID90 Voice Grants, A3, A4, and A5 <--I bet A4 here was triggering a phantom call when TSBK sent PDUs here
//MFID90 Group Regroup Channel Grant - Implicit
if (MAC[1+len_a] == 0xA3 && MAC[2+len_a] == 0x90)
{
int mfid = MAC[2+len_a];
UNUSED(mfid);
int channel = (MAC[5+len_a] << 8) | MAC[6+len_a];
int sgroup = (MAC[7+len_a] << 8) | MAC[8+len_a];
long int freq = 0;
fprintf (stderr, "\n MFID90 Group Regroup Channel Grant - Implicit");
fprintf (stderr, "\n CHAN [%04X] Group [%d][%04X]", channel, sgroup, sgroup);
freq = process_channel_to_freq (opts, state, channel);
//add active channel to string for ncurses display
sprintf (state->active_channel[0], "MFID90 Active Ch: %04X SG: %d; ", channel, sgroup);
state->last_active_time = time(NULL);
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == sgroup)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on MFID90 GRG -- block non-matching super group, allow matching group
if (state->tg_hold != 0 && state->tg_hold != sgroup) sprintf (mode, "%s", "B");
if (state->tg_hold != 0 && state->tg_hold == sgroup)
{
sprintf (mode, "%s", "A");
opts->p25_is_tuned = 0; //unlock tuner
}
//Skip tuning group calls if group calls are disabled
if (opts->trunk_tune_group_calls == 0) goto SKIPCALL;
//tune if tuning available
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0))
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[channel >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (channel & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
#endif
}
}
}
//if playing back files, and we still want to see what freqs are in use in the ncurses terminal
//might only want to do these on a grant update, and not a grant by itself?
if (opts->p25_trunk == 0)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
}
}
//MFID90 Group Regroup Channel Grant - Explicit
if (MAC[1+len_a] == 0xA4 && MAC[2+len_a] == 0x90)
{
int mfid = MAC[2+len_a];
int channel = (MAC[5+len_a] << 8) | MAC[6+len_a];
int channelr = (MAC[7+len_a] << 8) | MAC[8+len_a];
int sgroup = (MAC[9+len_a] << 8) | MAC[10+len_a];
long int freq = 0;
UNUSED2(mfid, channelr);
fprintf (stderr, "\n MFID90 Group Regroup Channel Grant - Explicit");
fprintf (stderr, "\n CHAN [%04X] Group [%d][%04X]", channel, sgroup, sgroup);
freq = process_channel_to_freq (opts, state, channel);
//add active channel to string for ncurses display
sprintf (state->active_channel[0], "MFID90 Active Ch: %04X SG: %d ", channel, sgroup);
state->last_active_time = time(NULL);
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == sgroup)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on MFID90 GRG -- block non-matching super group, allow matching group
if (state->tg_hold != 0 && state->tg_hold != sgroup) sprintf (mode, "%s", "B");
if (state->tg_hold != 0 && state->tg_hold == sgroup)
{
sprintf (mode, "%s", "A");
opts->p25_is_tuned = 0; //unlock tuner
}
//Skip tuning group calls if group calls are disabled
if (opts->trunk_tune_group_calls == 0) goto SKIPCALL;
//tune if tuning available
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0))
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[channel >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (channel & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
#endif
}
}
}
//if playing back files, and we still want to see what freqs are in use in the ncurses terminal
//might only want to do these on a grant update, and not a grant by itself?
if (opts->p25_trunk == 0)
{
if (sgroup == state->lasttg || sgroup == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
}
}
}
//MFID90 Group Regroup Channel Grant Update
if (MAC[1+len_a] == 0xA5 && MAC[2+len_a] == 0x90)
{
int channel1 = (MAC[4+len_a] << 8) | MAC[5+len_a];
int group1 = (MAC[6+len_a] << 8) | MAC[7+len_a];
int channel2 = (MAC[8+len_a] << 8) | MAC[9+len_a];
int group2 = (MAC[10+len_a] << 8) | MAC[11+len_a];
long int freq1 = 0;
long int freq2 = 0;
fprintf (stderr, "\n MFID90 Group Regroup Channel Grant Update");
fprintf (stderr, "\n Channel 1 [%04X] Group 1 [%d][%04X]", channel1, group1, group1);
freq1 = process_channel_to_freq (opts, state, channel1);
if (channel2 != channel1 && channel2 != 0 && channel2 != 0xFFFF)
{
fprintf (stderr, "\n Channel 2 [%04X] Group 2 [%d][%04X]", channel2, group2, group2);
freq2 = process_channel_to_freq (opts, state, channel2);
}
//add active channel to string for ncurses display
if (channel2 != channel1 && channel2 != 0 && channel2 != 0xFFFF)
sprintf (state->active_channel[0], "MFID90 Active Ch: %04X SG: %d; Ch: %04X SG: %d; ", channel1, group1, channel2, group2);
else sprintf (state->active_channel[0], "MFID90 Active Ch: %04X SG: %d; ", channel1, group1);
state->last_active_time = time(NULL);
//Skip tuning group calls if group calls are disabled
if (opts->trunk_tune_group_calls == 0) goto SKIPCALL;
//monstrocity below should get us evaluating and tuning groups...hopefully, will be first come first served though, no priority
//see how many loops we need to run on when to tune if first group is blocked
int loop = 1;
if (channel1 == channel2) loop = 1;
else loop = 2;
//assigned inside loop
long int tunable_freq = 0;
int tunable_chan = 0;
int tunable_group = 0;
for (int j = 0; j < loop; j++)
{
//assign our internal variables for check down on if to tune one freq/group or not
if (j == 0)
{
tunable_freq = freq1;
tunable_chan = channel1;
tunable_group = group1;
}
else
{
tunable_freq = freq2;
tunable_chan = channel2;
tunable_group = group2;
}
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == tunable_group)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on MFID90 GRG -- block non-matching super group, allow matching group
if (state->tg_hold != 0 && state->tg_hold != tunable_group) sprintf (mode, "%s", "B");
if (state->tg_hold != 0 && state->tg_hold == tunable_group)
{
sprintf (mode, "%s", "A");
opts->p25_is_tuned = 0; //unlock tuner
}
//check to see if the group candidate is blocked first
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) //DE is digital encrypted, B is block
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && tunable_freq != 0) //if we aren't already on a VC and have a valid frequency already
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[tunable_chan >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (tunable_chan & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, tunable_freq);
//probably best to only set these when really tuning
state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
j = 8; //break loop
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, tunable_freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
j = 8; //break loop
#endif
}
}
}
//if playing back files, and we still want to see what freqs are in use in the ncurses terminal
//might only want to do these on a grant update, and not a grant by itself?
if (opts->p25_trunk == 0)
{
if (tunable_group == state->lasttg || tunable_group == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = tunable_freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
}
}
}
}
//Standard P25 Tunable Commands
//Group Voice Channel Grant (GRP_V_CH_GRANT)
if (MAC[1+len_a] == 0x40)
{
int svc = MAC[2+len_a];
int channel = (MAC[3+len_a] << 8) | MAC[4+len_a];
int group = (MAC[5+len_a] << 8) | MAC[6+len_a];
int source = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
long int freq = 0;
fprintf (stderr, "\n");
if (svc & 0x80) fprintf (stderr, " Emergency");
if (svc & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (svc & 0x20) fprintf (stderr, " Duplex");
if (svc & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", svc & 0x7); //call priority
}
fprintf (stderr, " Group Voice Channel Grant");
fprintf (stderr, "\n SVC [%02X] CHAN [%04X] Group [%d] Source [%d]", svc, channel, group, source);
freq = process_channel_to_freq (opts, state, channel);
//add active channel to string for ncurses display
sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; ", channel, group);
state->last_active_time = time(NULL);
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == group)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on GRP_V -- block non-matching group, allow matching group
if (state->tg_hold != 0 && state->tg_hold != group) sprintf (mode, "%s", "B");
if (state->tg_hold != 0 && state->tg_hold == group)
{
sprintf (mode, "%s", "A");
opts->p25_is_tuned = 0; //unlock tuner
}
//Skip tuning group calls if group calls are disabled
if (opts->trunk_tune_group_calls == 0) goto SKIPCALL;
//Skip tuning encrypted calls if enc calls are disabled
if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL;
//tune if tuning available
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0))
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[channel >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (channel & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
#endif
}
}
}
//if playing back files, and we still want to see what freqs are in use in the ncurses terminal
//might only want to do these on a grant update, and not a grant by itself?
if (opts->p25_trunk == 0)
{
if (group == state->lasttg || group == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
}
}
}
//Telephone Interconnect Voice Channel Grant (or Update) -- Implicit and Explicit (MFID != Moto and opcode 8 and opcode 9)
if (MAC[1+len_a] == 0x48 || MAC[1+len_a] == 0x49 || MAC[1+len_a] == 0xC8 || MAC[1+len_a] == 0xC9)
{
//TELE_INT_CH_GRANT or TELE_INT_CH_GRANT_UPDT
int k = 1; //vPDU
if (MAC[len_a] == 0x07) k = 0; //TSBK
int svc = MAC[2+len_a+k];
int channel = (MAC[3+len_a+k] << 8) | MAC[4+len_a+k];
int timer = (MAC[5+len_a+k] << 8) | MAC[6+len_a+k];
int target = (MAC[7+len_a+k] << 16) | (MAC[8+len_a+k] << 8) | MAC[9+len_a+k];
long int freq = 0;
if ( MAC[1+len_a] & 0x80) //vPDU only
{
timer = (MAC[8+len_a] << 8) | MAC[9+len_a];
target = (MAC[10+len_a] << 16) | (MAC[11+len_a] << 8) | MAC[12+len_a];
}
fprintf (stderr, "\n");
if (svc & 0x80) fprintf (stderr, " Emergency");
if (svc & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (svc & 0x20) fprintf (stderr, " Duplex");
if (svc & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", svc & 0x7); //call priority
}
fprintf (stderr, " Telephone Interconnect Voice Channel Grant");
if ( MAC[1+len_a] & 0x01) fprintf (stderr, " Update");
if ( MAC[1+len_a] & 0x80) fprintf (stderr, " Explicit");
else fprintf (stderr, " Implicit");
fprintf (stderr, "\n CHAN: %04X; Timer: %f Seconds; Target: %d;", channel, (float)timer*0.1f, target); //timer unit is 100 ms, or 0.1 seconds
freq = process_channel_to_freq (opts, state, channel);
//add active channel to string for ncurses display
sprintf (state->active_channel[0], "Active Tele Ch: %04X TGT: %d; ", channel, target);
state->last_active_time = time(NULL);
//Skip tuning private calls if private calls is disabled (are telephone int calls private, or talkgroup?)
if (opts->trunk_tune_private_calls == 0) goto SKIPCALL;
//Skip tuning encrypted calls if enc calls are disabled
if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL;
//telephone only has a target address (manual shows combined source/target of 24-bits)
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == target)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on UU_V -- will want to disable UU_V grants while TG Hold enabled -- same for Telephone?
if (state->tg_hold != 0 && state->tg_hold != target) sprintf (mode, "%s", "B");
// if (state->tg_hold != 0 && state->tg_hold == target)
// {
// sprintf (mode, "%s", "A");
// opts->p25_is_tuned = 0; //unlock tuner
// }
//tune if tuning available
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0))
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[channel >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (channel & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, freq);
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, freq);
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
#endif
}
}
}
if (opts->p25_trunk == 0)
{
if (target == state->lasttg || target == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
}
}
}
//Unit-to-Unit Voice Service Channel Grant (UU_V_CH_GRANT), or Grant Update (same format)
if (MAC[1+len_a] == 0x44 || MAC[1+len_a] == 0x46 || MAC[1+len_a] == 0xC4) //double check these opcodes
{
int channel = (MAC[2+len_a] << 8) | MAC[3+len_a];
int target = (MAC[4+len_a] << 16) | (MAC[5+len_a] << 8) | MAC[6+len_a];
int source = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
unsigned long long int src_suid = 0;
long int freq = 0;
if (MAC[1+len_a] == 0x21)
{
src_suid = (MAC[6+len_a] << 48ULL) | (MAC[7+len_a] << 40ULL) | (MAC[8+len_a] << 32ULL) | (MAC[9+len_a] << 24ULL) |
(MAC[10+len_a] << 16ULL) | (MAC[11+len_a] << 8ULL) | (MAC[12+len_a] << 0ULL);
source = src_suid & 0xFFFFFF;
target = (MAC[13+len_a] << 16) | (MAC[14+len_a] << 8) | MAC[15+len_a];
// channel = (MAC[4+len_a] << 8) | MAC[5+len_a]; //CH-R, above is CH-T value
}
fprintf (stderr, "\n Unit to Unit Channel Grant");
if ( MAC[1+len_a] == 0x46) fprintf (stderr, " Update");
if ( MAC[1+len_a] == 0xC4) fprintf (stderr, " Extended");
fprintf (stderr, "\n CHAN: %04X; SRC: %d; TGT: %d; ", channel, source, target);
if (MAC[1+len_a] == 0xC4) fprintf (stderr, "SUID: %08llX-%08d; ", src_suid >> 24, source);
freq = process_channel_to_freq (opts, state, channel);
//add active channel to string for ncurses display
sprintf (state->active_channel[0], "Active Ch: %04X TGT: %d; ", channel, target);
state->last_active_time = time(NULL);
//Skip tuning private calls if private calls is disabled
if (opts->trunk_tune_private_calls == 0) goto SKIPCALL;
//Skip tuning encrypted calls if enc calls are disabled -- abb formats do not carry svc bits :(
// if (opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //enable, or disable?
//unit to unit needs work, may fail under certain conditions (first blocked, second allowed, etc) (labels should still work though)
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == source || state->group_array[i].groupNumber == target)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on UU_V -- will want to disable UU_V grants while TG Hold enabled
if (state->tg_hold != 0 && state->tg_hold != target) sprintf (mode, "%s", "B");
// if (state->tg_hold != 0 && state->tg_hold == target)
// {
// sprintf (mode, "%s", "A");
// opts->p25_is_tuned = 0; //unlock tuner
// }
//tune if tuning available
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0))
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[channel >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (channel & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, freq);
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, freq);
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
#endif
}
}
}
if (opts->p25_trunk == 0)
{
if (target == state->lasttg || target == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
}
}
}
//Group Voice Channel Grant Update Multiple - Explicit
if (MAC[1+len_a] == 0x25)
{
int svc1 = MAC[2+len_a];
int channelt1 = (MAC[3+len_a] << 8) | MAC[4+len_a];
int channelr1 = (MAC[5+len_a] << 8) | MAC[6+len_a];
int group1 = (MAC[7+len_a] << 8) | MAC[8+len_a];
int svc2 = MAC[9+len_a];
int channelt2 = (MAC[10+len_a] << 8) | MAC[11+len_a];
int channelr2 = (MAC[12+len_a] << 8) | MAC[13+len_a];
int group2 = (MAC[14+len_a] << 8) | MAC[15+len_a];
long int freq1t = 0;
long int freq1r = 0;
long int freq2t = 0;
UNUSED(freq1r);
fprintf (stderr, "\n Group Voice Channel Grant Update Multiple - Explicit");
fprintf (stderr, "\n SVC [%02X] CHAN-T [%04X] CHAN-R [%04X] Group [%d][%04X]", svc1, channelt1, channelr1, group1, group1);
if (svc1 & 0x80) fprintf (stderr, " Emergency");
if (svc1 & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (svc1 & 0x20) fprintf (stderr, " Duplex");
if (svc1 & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (svc1 & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", svc1 & 0x7); //call priority
}
freq1t = process_channel_to_freq (opts, state, channelt1);
if (channelr1 != 0 && channelr1 != 0xFFFF) freq1r = process_channel_to_freq (opts, state, channelr1);
fprintf (stderr, "\n SVC [%02X] CHAN-T [%04X] CHAN-R [%04X] Group [%d][%04X]", svc2, channelt2, channelr2, group2, group2);
if (svc2 & 0x80) fprintf (stderr, " Emergency");
if (svc2 & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (svc2 & 0x20) fprintf (stderr, " Duplex");
if (svc2 & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (svc2 & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", svc2 & 0x7); //call priority
}
freq1t = process_channel_to_freq (opts, state, channelt2);
if (channelr2 != 0 && channelr2 != 0xFFFF) freq1r = process_channel_to_freq (opts, state, channelr2);
//add active channel to string for ncurses display
sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; Ch: %04X TG: %d; ", channelt1, group1, channelt2, group2);
state->last_active_time = time(NULL);
//Skip tuning group calls if group calls are disabled
if (opts->trunk_tune_group_calls == 0) goto SKIPCALL;
//Skip tuning encrypted calls if enc calls are disabled
if ( (svc1 & 0x40) && (svc2 & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL;
int loop = 1;
if (channelt1 == channelt2) loop = 1;
else loop = 2;
//assigned inside loop
long int tunable_freq = 0;
int tunable_chan = 0;
int tunable_group = 0;
for (int j = 0; j < loop; j++)
{
//test svc opts for enc to tune or skip
if (j == 0)
{
if ( (svc1 & 0x40) && opts->trunk_tune_enc_calls == 0) j++; //skip to next
}
if (j == 1)
{
if (( svc2 & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //skip to end
}
//assign our internal variables for check down on if to tune one freq/group or not
if (j == 0)
{
tunable_freq = freq1t;
tunable_chan = channelt1;
tunable_group = group1;
}
else
{
tunable_freq = freq2t;
tunable_chan = channelt2;
tunable_group = group2;
}
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == tunable_group)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on GRP_V Multi -- block non-matching group, allow matching group
if (state->tg_hold != 0 && state->tg_hold != tunable_group) sprintf (mode, "%s", "B");
if (state->tg_hold != 0 && state->tg_hold == tunable_group)
{
sprintf (mode, "%s", "A");
opts->p25_is_tuned = 0; //unlock tuner
}
//tune if tuning available
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0))
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && tunable_freq != 0) //if we aren't already on a VC and have a valid frequency
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[tunable_chan >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (tunable_chan & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, tunable_freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
j = 8; //break loop
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, tunable_freq);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
j = 8; //break loop
#endif
}
}
}
if (opts->p25_trunk == 0)
{
if (tunable_group == state->lasttg || tunable_group == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = tunable_freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
}
}
}
}
//Group Voice Channel Grant Update Multiple - Implicit
if (MAC[1+len_a] == 0x05)
{
int so1 = MAC[2+len_a];
int channel1 = (MAC[3+len_a] << 8) | MAC[4+len_a];
int group1 = (MAC[5+len_a] << 8) | MAC[6+len_a];
int so2 = MAC[7+len_a];
int channel2 = (MAC[8+len_a] << 8) | MAC[9+len_a];
int group2 = (MAC[10+len_a] << 8) | MAC[11+len_a];
int so3 = MAC[12+len_a];
int channel3 = (MAC[13+len_a] << 8) | MAC[14+len_a];
int group3 = (MAC[15+len_a] << 8) | MAC[16+len_a];
long int freq1 = 0;
long int freq2 = 0;
long int freq3 = 0;
fprintf (stderr, "\n Group Voice Channel Grant Update Multiple - Implicit");
fprintf (stderr, "\n Channel 1 [%04X] Group 1 [%d][%04X]", channel1, group1, group1);
if (so1 & 0x80) fprintf (stderr, " Emergency");
if (so1 & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (so1 & 0x20) fprintf (stderr, " Duplex");
if (so1 & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (so1 & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", so1 & 0x7); //call priority
}
freq1 = process_channel_to_freq (opts, state, channel1);
if (channel2 != channel1 && channel2 != 0 && channel2 != 0xFFFF)
{
fprintf (stderr, "\n Channel 2 [%04X] Group 2 [%d][%04X]", channel2, group2, group2);
if (so2 & 0x80) fprintf (stderr, " Emergency");
if (so2 & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (so2 & 0x20) fprintf (stderr, " Duplex");
if (so2 & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (so2 & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", so2 & 0x7); //call priority
}
freq2 = process_channel_to_freq (opts, state, channel2);
}
if (channel3 != channel2 && channel3 != 0 && channel3 != 0xFFFF)
{
fprintf (stderr, "\n Channel 3 [%04X] Group 3 [%d][%04X]", channel3, group3, group3);
if (so3 & 0x80) fprintf (stderr, " Emergency");
if (so3 & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (so3 & 0x20) fprintf (stderr, " Duplex");
if (so3 & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (so3 & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", so3 & 0x7); //call priority
}
freq3 = process_channel_to_freq (opts, state, channel3);
}
//add active channel to string for ncurses display
sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; Ch: %04X TG: %d; Ch: %04X TG: %d; ", channel1, group1, channel2, group2, channel3, group3);
//add active channel to string for ncurses display (multi check)
// if (channel3 != channel2 && channel2 != channel1 && channel3 != 0 && channel3 != 0xFFFF)
// sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; Ch: %04X TG: %d; Ch: %04X TG: %d; ", channel1, group1, channel2, group2, channel3, group3);
state->last_active_time = time(NULL);
//Skip tuning group calls if group calls are disabled
if (opts->trunk_tune_group_calls == 0) goto SKIPCALL;
//Skip tuning encrypted calls if enc calls are disabled
if ( (so1 & 0x40) && (so2 & 0x40) && (so3 & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //this?
int loop = 3;
long int tunable_freq = 0;
int tunable_chan = 0;
int tunable_group = 0;
for (int j = 0; j < loop; j++)
{
//test svc opts for enc to tune or skip
if (j == 0)
{
if ( (so1 & 0x40) && opts->trunk_tune_enc_calls == 0) j++; //skip to next
}
if (j == 1)
{
if ( (so2 & 0x40) && opts->trunk_tune_enc_calls == 0) j++; //skip to next
}
if (j == 2)
{
if ( (so3 & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //skip to end
}
//assign our internal variables for check down on if to tune one freq/group or not
if (j == 0)
{
tunable_freq = freq1;
tunable_chan = channel1;
tunable_group = group1;
}
else if (j == 1)
{
tunable_freq = freq2;
tunable_chan = channel2;
tunable_group = group2;
}
else
{
tunable_freq = freq3;
tunable_chan = channel3;
tunable_group = group3;
}
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == tunable_group)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on GRP_V Multi -- block non-matching group, allow matching group
if (state->tg_hold != 0 && state->tg_hold != tunable_group) sprintf (mode, "%s", "B");
if (state->tg_hold != 0 && state->tg_hold == tunable_group)
{
sprintf (mode, "%s", "A");
opts->p25_is_tuned = 0; //unlock tuner
}
//check to see if the group candidate is blocked first
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) //DE is digital encrypted, B is block
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && tunable_freq != 0) //if we aren't already on a VC and have a valid frequency already
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[tunable_chan >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (tunable_chan & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, tunable_freq);
//probably best to only set these when really tuning
state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
j = 8; //break loop
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, tunable_freq);
//probably best to only set these when really tuning
state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
j = 8; //break loop
#endif
}
}
}
if (opts->p25_trunk == 0)
{
if (tunable_group == state->lasttg || tunable_group == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = tunable_freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
}
}
}
}
//Group Voice Channel Grant Update - Implicit
if (MAC[1+len_a] == 0x42)
{
int channel1 = (MAC[2+len_a] << 8) | MAC[3+len_a];
int group1 = (MAC[4+len_a] << 8) | MAC[5+len_a];
int channel2 = (MAC[6+len_a] << 8) | MAC[7+len_a];
int group2 = (MAC[8+len_a] << 8) | MAC[9+len_a];
long int freq1 = 0;
long int freq2 = 0;
fprintf (stderr, "\n Group Voice Channel Grant Update - Implicit");
fprintf (stderr, "\n Channel 1 [%04X] Group 1 [%d][%04X]", channel1, group1, group1);
freq1 = process_channel_to_freq (opts, state, channel1);
if (channel2 != channel1 && channel2 != 0 && channel2 != 0xFFFF)
{
fprintf (stderr, "\n Channel 2 [%04X] Group 2 [%d][%04X]", channel2, group2, group2);
freq2 = process_channel_to_freq (opts, state, channel2);
}
//add active channel to string for ncurses display
if (channel2 != channel1 && channel2 != 0 && channel2 != 0xFFFF)
sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; Ch: %04X TG: %d; ", channel1, group1, channel2, group2);
else sprintf (state->active_channel[0], "Active Ch: %04X TG: %d; ", channel1, group1);
state->last_active_time = time(NULL);
//Skip tuning group calls if group calls are disabled
if (opts->trunk_tune_group_calls == 0) goto SKIPCALL;
//Skip tuning encrypted calls if enc calls are disabled -- abb formats do not carry svc bits :(
// if (opts->trunk_tune_enc_calls == 0) goto SKIPCALL; //enable, or disable?
int loop = 1;
if (channel1 == channel2) loop = 1;
else loop = 2;
//assigned inside loop
long int tunable_freq = 0;
int tunable_chan = 0;
int tunable_group = 0;
for (int j = 0; j < loop; j++)
{
//assign our internal variables for check down on if to tune one freq/group or not
if (j == 0)
{
tunable_freq = freq1;
tunable_chan = channel1;
tunable_group = group1;
}
else
{
tunable_freq = freq2;
tunable_chan = channel2;
tunable_group = group2;
}
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == tunable_group)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on GRP_V Multi -- block non-matching group, allow matching group
if (state->tg_hold != 0 && state->tg_hold != tunable_group) sprintf (mode, "%s", "B");
if (state->tg_hold != 0 && state->tg_hold == tunable_group)
{
sprintf (mode, "%s", "A");
opts->p25_is_tuned = 0; //unlock tuner
}
//check to see if the group candidate is blocked first
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0)) //DE is digital encrypted, B is block
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && tunable_freq != 0) //if we aren't already on a VC and have a valid frequency already
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[tunable_chan >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (tunable_chan & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, tunable_freq);
//probably best to only set these when really tuning
state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
j = 8; //break loop
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, tunable_freq);
//probably best to only set these when really tuning
state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
j = 8; //break loop
#endif
}
}
}
if (opts->p25_trunk == 0)
{
if (tunable_group == state->lasttg || tunable_group == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = tunable_freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = tunable_freq;
}
}
}
}
//Group Voice Channel Grant Update - Explicit
if (MAC[1+len_a] == 0xC3)
{
int svc = MAC[2+len_a];
int channelt = (MAC[3+len_a] << 8) | MAC[4+len_a];
int channelr = (MAC[5+len_a] << 8) | MAC[6+len_a];
int group = (MAC[7+len_a] << 8) | MAC[8+len_a];
long int freq1 = 0;
long int freq2 = 0;
UNUSED(freq2);
fprintf (stderr, "\n");
if (svc & 0x80) fprintf (stderr, " Emergency");
if (svc & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (svc & 0x20) fprintf (stderr, " Duplex");
if (svc & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", svc & 0x7); //call priority
}
fprintf (stderr, " Group Voice Channel Grant Update - Explicit");
fprintf (stderr, "\n SVC [%02X] CHAN-T [%04X] CHAN-R [%04X] Group [%d][%04X]", svc, channelt, channelr, group, group);
freq1 = process_channel_to_freq (opts, state, channelt);
if (channelr != 0 && channelr != 0xFFFF) freq2 = process_channel_to_freq (opts, state, channelr); //one system had this as channel 0xFFFF -- look up any particular meaning for that
//don't set the tg here, one multiple grant updates, will mess up the TG value on current call
// if (slot == 0)
// {
// state->lasttg = group;
// }
// else state->lasttgR = group;
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == group)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
//TG hold on GRP_V Exp -- block non-matching group, allow matching group
if (state->tg_hold != 0 && state->tg_hold != group) sprintf (mode, "%s", "B");
if (state->tg_hold != 0 && state->tg_hold == group)
{
sprintf (mode, "%s", "A");
opts->p25_is_tuned = 0; //unlock tuner
}
//Skip tuning group calls if group calls are disabled
if (opts->trunk_tune_group_calls == 0) goto SKIPCALL;
//Skip tuning encrypted calls if enc calls are disabled
if ( (svc & 0x40) && opts->trunk_tune_enc_calls == 0) goto SKIPCALL;
//tune if tuning available
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0))
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq1 != 0) //if we aren't already on a VC and have a valid frequency
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[channelt >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
// if (channelt & 1) //VCH1
// {
// opts->slot1_on = 0;
// opts->slot2_on = 1;
// }
// else //VCH0
// {
// opts->slot1_on = 1;
// opts->slot2_on = 0;
// }
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, freq1);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, freq1);
state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
#endif
}
}
}
if (opts->p25_trunk == 0)
{
if (group == state->lasttg || group == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq1;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq1;
}
}
}
//SNDCP Data Page Response -- ISP
// if (MAC[1+len_a] == 0x53)
// {
// fprintf (stderr, "\n SNDCP Data Page Response ");
// int dso = MAC[3+len_a];
// int ans = MAC[4+len_a];
// int dac = (MAC[5+len_a] << 8) | MAC[6+len_a];
// int source = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
// fprintf (stderr, "\n ANS: %02X; DSO: %02X DAC: %02X; Source: %d;", ans, dso, dac, source);
// if (ans == 0x20) fprintf (stderr, " - Proceed;");
// else if (ans == 0x21) fprintf (stderr, " - Deny;");
// else if (ans == 0x22) fprintf (stderr, " - Wait;");
// else fprintf (stderr, " - Other;"); //unspecified
// }
//SNDCP Reconnect Request -- ISP
// if (MAC[1+len_a] == 0x54)
// {
// fprintf (stderr, "\n SNDCP Reconnect Request ");
// int dso = MAC[3+len_a];
// int dac = (MAC[4+len_a] << 8) | MAC[5+len_a];
// int ds = (MAC[6+len_a] >> 7) & 1;
// int res = MAC[6+len_a] & 7;
// int source = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
// fprintf (stderr, "\n DS: %d; DSO: %02X DAC: %02X; RES: %02X; Source: %d;", ds, dso, dac, res, source);
// }
//SNDCP Data Channel Grant
if (MAC[1+len_a] == 0x54)
{
fprintf (stderr, "\n SNDCP Data Channel Grant - Explicit");
int dso = MAC[2+len_a];
int channelt = (MAC[3+len_a] << 8) | MAC[4+len_a];
int channelr = (MAC[5+len_a] << 8) | MAC[6+len_a];
int target = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
fprintf (stderr, "\n DSO: %02X; CHAN-T: %04X; CHAN-R: %04X; Target: %d;", dso, channelt, channelr, target);
for (int i = 0; i < state->group_tally; i++)
{
if (state->group_array[i].groupNumber == target)
{
fprintf (stderr, " [%s]", state->group_array[i].groupName);
strcpy (mode, state->group_array[i].groupMode);
break;
}
}
long int freq = process_channel_to_freq (opts, state, channelt);
//add active channel to string for ncurses display
sprintf (state->active_channel[0], "Active Data Ch: %04X TGT: %d; ", channelt, target);
state->last_active_time = time(NULL);
//Skip tuning data calls if data calls is disabled
if (opts->trunk_tune_data_calls == 0) goto SKIPCALL;
//TG hold on UU_V -- will want to disable UU_V grants while TG Hold enabled
if (state->tg_hold != 0 && state->tg_hold != target) sprintf (mode, "%s", "B");
//tune if tuning available
if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0))
{
//reworked to set freq once on any call to process_channel_to_freq, and tune on that, independent of slot
if (state->p25_cc_freq != 0 && opts->p25_is_tuned == 0 && freq != 0) //if we aren't already on a VC and have a valid frequency
{
//changed to allow symbol rate change on C4FM Phase 2 systems as well as QPSK
if (1 == 1)
{
if (state->p25_chan_tdma[channelt >> 12] == 1)
{
state->samplesPerSymbol = 8;
state->symbolCenter = 3;
//shim fix to stutter/lag by only enabling slot on the target/channel we tuned to
//this will only occur in realtime tuning, not not required .bin or .wav playback
if (channelt & 1) //VCH1
{
opts->slot1_on = 0;
opts->slot2_on = 1;
}
else //VCH0
{
opts->slot1_on = 1;
opts->slot2_on = 0;
}
}
//because SNDCP data channels are Phase 1 channels, we will want to check to see if we need
//to enable p1 frames and switch sample rate in reverse if on a TDMA-CC system
//in the future, we may consider needing to do this if an SU causes the sytem to revert to P1 on a channel?
else if (state->p25_chan_tdma[channelt >> 12] == 0 && state->p25_cc_is_tdma == 1)
{
state->samplesPerSymbol = 10;
state->symbolCenter = 4;
opts->frame_p25p1 = 1; //enable, just in case it isn't already
//enable voice on slot 1 (just in case they start talking too, but probably won't)
opts->slot1_on = 1;
}
}
//rigctl
if (opts->use_rigctl == 1)
{
if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
SetFreq(opts->rigctl_sockfd, freq);
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
opts->p25_is_tuned = 1; //set to 1 to set as currently tuned so we don't keep tuning nonstop
state->last_vc_sync_time = time(NULL);
}
//rtl
else if (opts->audio_in_type == 3)
{
#ifdef USE_RTLSDR
rtl_dev_tune (opts, freq);
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
opts->p25_is_tuned = 1;
state->last_vc_sync_time = time(NULL);
#endif
}
}
}
if (opts->p25_trunk == 0)
{
if (target == state->lasttg || target == state->lasttgR)
{
//P1 FDMA
if (state->synctype == 0 || state->synctype == 1) state->p25_vc_freq[0] = freq;
//P2 TDMA
else state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
}
}
}
//SNDCP Data Page Request
if (MAC[1+len_a] == 0x55)
{
fprintf (stderr, "\n SNDCP Data Page Request ");
int dso = MAC[2+len_a];
int dac = (MAC[3+len_a] << 8) | MAC[4+len_a];
int target = (MAC[5+len_a] << 16) | (MAC[6+len_a] << 8) | MAC[7+len_a];
//P25p1 TSBK is shifted slightly on these two values
if (state->synctype == 0 || state->synctype == 1)
{
dac = (MAC[5+len_a] << 8) | MAC[6+len_a];
target = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
}
fprintf (stderr, "\n DSO: %02X; DAC: %02X; Target: %d;", dso, dac, target);
}
//SNDCP Data Channel Announcement
if (MAC[1+len_a] == 0xD6)
{
fprintf (stderr, "\n SNDCP Data Channel Announcement ");
int aa = (MAC[2+len_a] >> 7) & 1;
int ra = (MAC[2+len_a] >> 6) & 1;
int dso = MAC[2+len_a];
int channelt = (MAC[4+len_a] << 8) | MAC[5+len_a];
int channelr = (MAC[6+len_a] << 8) | MAC[7+len_a];
int dac = (MAC[8+len_a] << 8) | MAC[9+len_a];
fprintf (stderr, "\n AA: %d; RA: %d; DSO: %02X; DAC: %02X; CHAN-T: %04X; CHAN-R: %04X;", aa, ra, dso, dac, channelt, channelr);
long int freq = 0; UNUSED(freq);
if (channelt != 0)
freq = process_channel_to_freq (opts, state, channelt);
if (channelr != 0)
freq = process_channel_to_freq (opts, state, channelt);
}
//MFID90 Group Regroup Add Command
if (MAC[1+len_a] == 0x81 && MAC[2+len_a] == 0x90) //needs MAC message len update, may work same as explicit enc regroup?
{
fprintf (stderr, "\n MFID90 Group Regroup Add Command ");
}
//the len on these indicate they are always a single messages, foregoing the +len_a index pointer
if (MAC[1] == 0x91 && MAC[2] == 0x90)
{
uint8_t len = MAC[3]; //this indication is correct, 0x11, or 17 octets including opcode and mfid
uint8_t mac_bits[24*8]; memset (mac_bits, 0, sizeof(mac_bits));
uint8_t bytes[24]; memset (bytes, 0, sizeof(bytes));
for (int i = 0; i < 24; i++) bytes[i] = (uint8_t)MAC[i];
unpack_byte_array_into_bit_array(bytes+1, mac_bits, len);
fprintf (stderr, "\n MFID90 (Moto) Talker Alias Header");
apx_embedded_alias_header_phase2 (opts, state, state->currentslot, mac_bits);
}
if (MAC[1] == 0x95 && MAC[2] == 0x90)
{
uint8_t len = MAC[3]; //this indication is correct, 0x11, or 17 octets including opcode and mfid
uint8_t mac_bits[24*8]; memset (mac_bits, 0, sizeof(mac_bits));
uint8_t bytes[24]; memset (bytes, 0, sizeof(bytes));
for (int i = 0; i < 24; i++) bytes[i] = (uint8_t)MAC[i];
unpack_byte_array_into_bit_array(bytes+1, mac_bits, len);
fprintf (stderr, "\n MFID90 (Moto) Talker Alias Blocks");
apx_embedded_alias_blocks_phase2 (opts, state, state->currentslot, mac_bits);
}
//System Service Broadcast
if (MAC[1+len_a] == 0x78)
{
int TWV = MAC[2+len_a]; //TWUID Validity
int SSA = (MAC[3+len_a] << 16) | (MAC[4+len_a] << 8) | MAC[5+len_a];
int SSS = (MAC[6+len_a] << 16) | (MAC[7+len_a] << 8) | MAC[8+len_a];
int RPL = MAC[9+len_a];
fprintf (stderr, "\n System Service Broadcast - Abbreviated \n");
fprintf (stderr, " TWV: %02X SSA: %06X; SSS: %06X; RPL: %02X", TWV, SSA, SSS, RPL);
}
//RFSS Status Broadcast - Implicit
if (MAC[1+len_a] == 0x7A)
{
int lra = MAC[2+len_a];
int lsysid = ((MAC[3+len_a] & 0xF) << 8) | MAC[4+len_a];
int rfssid = MAC[5+len_a];
int siteid = MAC[6+len_a];
int channel = (MAC[7+len_a] << 8) | MAC[8+len_a];
int sysclass = MAC[9+len_a];
fprintf (stderr, "\n RFSS Status Broadcast - Implicit \n");
fprintf (stderr, " LRA [%02X] SYSID [%03X] RFSS ID [%03d] SITE ID [%03d] CHAN [%04X] SSC [%02X] ", lra, lsysid, rfssid, siteid, channel, sysclass);
process_channel_to_freq (opts, state, channel);
state->p2_siteid = siteid;
state->p2_rfssid = rfssid;
}
//RFSS Status Broadcast - Explicit
if (MAC[1+len_a] == 0xFA)
{
int lra = MAC[2+len_a];
int lsysid = ((MAC[3+len_a] & 0xF) << 8) | MAC[4+len_a];
int rfssid = MAC[5+len_a];
int siteid = MAC[6+len_a];
int channelt = (MAC[7+len_a] << 8) | MAC[8+len_a];
int channelr = (MAC[9+len_a] << 8) | MAC[10+len_a];
int sysclass = MAC[11+len_a];
fprintf (stderr, "\n RFSS Status Broadcast - Explicit \n");
fprintf (stderr, " LRA [%02X] SYSID [%03X] RFSS ID [%03d] SITE ID [%03d]\n CHAN-T [%04X] CHAN-R [%02X] SSC [%02X] ", lra, lsysid, rfssid, siteid, channelt, channelr, sysclass);
process_channel_to_freq (opts, state, channelt);
process_channel_to_freq (opts, state, channelr);
state->p2_siteid = siteid;
state->p2_rfssid = rfssid;
}
//Unit-to-Unit Answer Request (UU_ANS_REQ) -- ISP?
// if (MAC[1+len_a] == 0x45 && MAC[2+len_a] != 0x90)
// {
// int svc = MAC[2+len_a];
// int ans = MAC[3+len_a];
// int target = (MAC[4+len_a] << 16) | (MAC[5+len_a] << 8) | MAC[6+len_a];
// int source = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
// fprintf (stderr, "\n Unit to Unit Channel Answer Request");
// fprintf (stderr, "\n SVC [%02X] Answer [%02X] Source [%d] Target [%d]", svc, ans, source, target);
// if (ans == 0x20) fprintf (stderr, " - Proceed;");
// else if (ans == 0x21) fprintf (stderr, " - Deny;");
// else if (ans == 0x22) fprintf (stderr, " - Wait;");
// else fprintf (stderr, " - Other;"); //unspecified
// }
//TODO: Restructure this function to group standard Opcodes away from MFID 90 and MFID A4, and Unknown MFID
//or just go to if-elseif-else layout (probably easier that way)
//Harris A4 Opcodes
if (MAC[1+len_a] != 0xB0 && MAC[2+len_a] == 0xA4)
{
// 6.2.36 Manufacturer Specific regarding octet 3 as len
int len = MAC[3+len_a] & 0x3F;
int res = MAC[3+len_a] >> 6;
//sanity check that we don't exceed the max MAC array size
if (len > 24)
len = 24; //should never exceed this len, but just in case it does
//Harris "Talker" Alias
if (MAC[1+len_a] == 0xA8)
{
// fprintf (stderr, "\n MFID A4 (Harris); VCH %d; TG: %d; SRC: %d; Talker Alias: ", slot, ttg, tsrc);
fprintf (stderr, "\n MFID A4 (Harris); VCH %d;", slot);
uint8_t bytes[24]; memset(bytes, 0, sizeof(bytes));
for (int8_t i = 0; i < 24; i++)
bytes[i] = (uint8_t)MAC[i];
l3h_embedded_alias_decode(opts, state, slot, len, bytes);
}
else if (MAC[1+len_a] == 0x81) //speculative based on the EDACS message that is also flushed with all F hex values
{
fprintf (stderr, "\n MFID A4 (Harris) Group Regroup Bitmap: ");
for (i = 4; i <= len; i++)
fprintf (stderr, "%02llX", MAC[i+len_a]);
}
else
{
fprintf (stderr, "\n MFID A4 (Harris); Res: %d; Len: %d; Opcode: %02llX; ", res, len, MAC[1+len_a] & 0x3F); //first two bits are the b0 and b1
for (i = 4; i <= len; i++)
fprintf (stderr, "%02llX", MAC[i+len_a]);
}
//assign here so we don't read an extra opcode value, like MAC Release on FL-DCC-1 (0x31 opcode)
len_b = len;
}
//This is now confirmed to have the Harris Talker GPS, but the structure is unusual compared to other MFID messages,
//the A4 indicator is one octet more to the 'right' than is normative, so I cannot verify the len value (0x11, or 17).
//Its possible the 0x80 is the 'Manufacturer Message' Opcode, which in the manual shows the rest of the
//octets are not normative, and as such, can't say there is a len value (but should assume entire the SACCH/FACCH field)
if (MAC[len_a+1] == 0x80 && MAC[len_a+2] != 0xA4 && MAC[len_a+2] != 0x90)
{
int unk1 = MAC[len_a+1]; //assuming this is the octet set for the 'manufacturer specific' message, may only be the MSBit
int unk2 = MAC[len_a+2]; //This field is observed as 0xAA, unknown if this is an opcode, or other MFID
int mfid = MAC[len_a+3]; //This is where the 0xA4 (Harris) Identifier is found in this message, as opposed to +2
int len = MAC[len_a+4] & 0x3F;; //0x11 or 17 dec sounds reasonable, but cannot verify
fprintf (stderr, "\n MFID %02X (Harris); Len: %d; Opcode: %02X/%02X;", mfid, len, unk1, unk2);
//convert bytes to bits, may move this up top
uint8_t mac_bits[24*8];
memset (mac_bits, 0, sizeof(mac_bits));
int l, x, z = 0;
for (l = 0; l < 24; l++)
{
for (x = 0; x < 8; x++)
mac_bits[z++] = (((uint8_t)MAC[l] << x) & 0x80) >> 7;
}
int tsrc = 0;
if (slot == 0 && state->lastsrc != 0) tsrc = state->lastsrc;
if (slot == 1 && state->lastsrcR != 0) tsrc = state->lastsrcR;
// harris_gps (opts, state, slot, mac_bits); //fallback
nmea_harris (opts, state, mac_bits+0, tsrc, slot); //new
//debug - just dump payload
// for (i = 0; i < 24; i++)
// fprintf (stderr, " %02llX", MAC[i]);
len_b = 17;
}
//Tait Observed "tdma micro-slot counter", this can be a single message in a facch idle, or a ndary message in a sacch channel update
if (MAC[len_a+1] == 0xB5 && MAC[len_a+2] == 0xD8)
{
uint8_t mfid = MAC[len_a+2];
uint16_t sc = (MAC[len_a+4] << 8) + MAC[len_a+5]; //its possible that not all bits in these two bytes are slots, similar to sync_bcst
uint8_t len = MAC[len_a+3] & 0x3F; //5 on this opcode (including opcode, mfid, len, and two bytes for slot count)
//confirmed, this is the same as the sync_bcst slot counter value up to 8000 (0x1F40)
sc &= 0x1FFF;
fprintf (stderr, "\n MFID %02X (Tait); Len: %d; Micro Slot Counter: %04X;", mfid, len, sc);
len_b = 5;
}
//look for other unknown Tait opcodes
if (MAC[len_a+1] != 0xB5 && MAC[len_a+2] == 0xD8)
{
uint8_t mfid = MAC[len_a+2];
uint8_t len = MAC[len_a+3] & 0x3F;
fprintf (stderr, "\n MFID %02X (Tait); Len: %d; Opcode: %02llX;", mfid, len, MAC[len_a+1]);
//sanity check
if (len > 24)
len = 24;
//dump entire payload
fprintf (stderr, " Payload: ");
for (i = 4; i < len; i++)
fprintf (stderr, "%02llX", MAC[i+len_a]);
len_b = len;
}
/*
Maybe this is why some of these SYNC_BCST PDUs have zeroes in most fields
Information provided in the SYNC_BCST message may be used for purposes other
than providing synchronization to a TDMA voice channel. These purposes are beyond
the scope of this document. SUs not interested in synchronization with the TDMA voice
channel may ignore the status of the US bit.
*/
//Synchronization Broadcast (SYNC_BCST)
if (MAC[1+len_a] == 0x70)
{
//NOTE: I've observed the minute value on Harris (Duke) does not work the same (rolls over every ~3 minutes)
//as it does on a Moto system (actual minute value), may want to expose and check mm or mc bits (AABC-D Page 199-200)
fprintf (stderr, "\n Synchronization Broadcast");
int us = (MAC[3+len_a] >> 3) & 0x1; //synced or unsynced FDMA to TDMA
int ist = (MAC[3+len_a] >> 2) & 0x1; //IST bit tells us if time is realiable, synced to external source
int mm = (MAC[3+len_a] >> 1) & 0x1; //Minute / Microslot Boundary Unlocked
int mc = (((MAC[3+len_a] >> 0) & 0x1) << 1) + (((MAC[4+len_a] >> 7) & 0x1) << 0); //Minute Correction
int vl = (MAC[4+len_a] >> 6) & 0x1; //Local Time Offset if Valid
int ltoff = (MAC[4+len_a] & 0x3F);
int year = MAC[5+len_a] >> 1;
int month = ((MAC[5+len_a] & 0x1) << 3) | (MAC[6+len_a] >> 5);
int day = (MAC[6+len_a] & 0x1F);
int hour = MAC[7+len_a] >> 3;
int min = ((MAC[7+len_a] & 0x7) << 3) | (MAC[8+len_a] >> 5);
int slots = ((MAC[8+len_a] & 0x1F) << 8) | MAC[9+len_a];
int sign = (ltoff & 0b100000) >> 5;
float offhour = 0;
if (opts->payload == 1)
{
fprintf (stderr, "\n");
if (us) fprintf (stderr, " Unsynchronized Slots;");
if (ist) fprintf (stderr, " External System Time Sync;");
if (mm) fprintf (stderr, " Minute / Microslots Boundary Unlocked;"); //just a rolling counter
if (mc) fprintf (stderr, " Minute Correction: +%.01f ms;", (float)mc * 2.5f);
if (vl) fprintf (stderr, " Local Time Offset Valid;");
}
//calculate local time (on system) by looking at offset and subtracting 30 minutes increments, or divide by 2 for hourly
if (sign == 1)
{
offhour = -( (ltoff & 0b11111 ) / 2);
}
else offhour = ( (ltoff & 0b11111 ) / 2);
int seconds = slots / 135; //very rough estimation, but may be close enough for grins
if (seconds > 59) seconds = 59; //sanity check for rounding error
if (year != 0) //if time is synced in this PDU
{
fprintf (stderr, "\n Date: 20%02d.%02d.%02d Time: %02d:%02d:%02d UTC",
year, month, day, hour, min, seconds);
if (offhour != 0) //&& vl == 1
fprintf (stderr, "\n Local Time Offset: %.01f Hours;", offhour);
}
if (opts->payload == 1)
fprintf (stderr, "\n US: %d; IST: %d; MM: %d; MC: %d; VL: %d; Sync Slots: %d; ", us, ist, mm, mc, vl, slots);
}
//identifier update VHF/UHF
if (MAC[1+len_a] == 0x74)
{
state->p25_chan_iden = MAC[2+len_a] >> 4;
int iden = state->p25_chan_iden;
int bw_vu = (MAC[2+len_a] & 0xF);
state->p25_trans_off[iden] = (MAC[3+len_a] << 6) | (MAC[4+len_a] >> 2);
state->p25_chan_spac[iden] = ((MAC[4+len_a] & 0x3) << 8) | MAC[5+len_a];
state->p25_base_freq[iden] = (MAC[6+len_a] << 24) | (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | (MAC[9+len_a] << 0);
//this is causing more issues -- need a different way to check on this
// if (state->p25_chan_spac[iden] == 0x64) //tdma
// {
// state->p25_chan_type[iden] = 4; //
// state->p25_chan_tdma[iden] = 1; //
// }
// else //fdma
// {
// state->p25_chan_type[iden] = 1; //
// state->p25_chan_tdma[iden] = 0; //
// }
state->p25_chan_type[iden] = 1; //set as old values for now
state->p25_chan_tdma[iden] = 0; //set as old values for now
fprintf (stderr, "\n Identifier Update UHF/VHF\n");
fprintf (stderr, " Channel Identifier [%01X] BW [%01X] Transmit Offset [%04X]\n Channel Spacing [%03X] Base Frequency [%08lX] [%09ld]",
state->p25_chan_iden, bw_vu, state->p25_trans_off[iden], state->p25_chan_spac[iden], state->p25_base_freq[iden], state->p25_base_freq[iden] * 5);
}
//identifier update (Non-TDMA 6.2.22) (Non-VHF-UHF) //with signed offset, bit trans_off >> 8; bit number 9
if (MAC[1+len_a] == 0x7D)
{
state->p25_chan_iden = MAC[2+len_a] >> 4;
int iden = state->p25_chan_iden;
state->p25_chan_type[iden] = 1;
state->p25_chan_tdma[iden] = 0;
int bw = ((MAC[2+len_a] & 0xF) << 5) | ((MAC[3+len_a] & 0xF8) >> 2);
state->p25_trans_off[iden] = (MAC[3+len_a] << 6) | (MAC[4+len_a] >> 2);
state->p25_chan_spac[iden] = ((MAC[4+len_a] & 0x3) << 8) | MAC[5+len_a];
state->p25_base_freq[iden] = (MAC[6+len_a] << 24) | (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | (MAC[9+len_a] << 0);
fprintf (stderr, "\n Identifier Update (8.3.1.23)\n");
fprintf (stderr, " Channel Identifier [%01X] BW [%01X] Transmit Offset [%04X]\n Channel Spacing [%03X] Base Frequency [%08lX] [%09ld]",
state->p25_chan_iden, bw, state->p25_trans_off[iden], state->p25_chan_spac[iden], state->p25_base_freq[iden], state->p25_base_freq[iden] * 5);
}
//identifier update for TDMA, Abbreviated
if (MAC[1+len_a] == 0x73)
{
state->p25_chan_iden = MAC[2+len_a] >> 4;
int iden = state->p25_chan_iden;
state->p25_chan_tdma[iden] = 1;
state->p25_chan_type[iden] = MAC[2+len_a] & 0xF;
state->p25_trans_off[iden] = (MAC[3+len_a] << 6) | (MAC[4+len_a] >> 2);
state->p25_chan_spac[iden] = ((MAC[4+len_a] & 0x3) << 8) | MAC[5+len_a];
state->p25_base_freq[iden] = (MAC[6+len_a] << 24) | (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | (MAC[9+len_a] << 0);
fprintf (stderr, "\n Identifier Update for TDMA - Abbreviated\n");
fprintf (stderr, " Channel Identifier [%01X] Channel Type [%01X] Transmit Offset [%04X]\n Channel Spacing [%03X] Base Frequency [%08lX] [%09ld]",
state->p25_chan_iden, state->p25_chan_type[iden], state->p25_trans_off[iden], state->p25_chan_spac[iden], state->p25_base_freq[iden], state->p25_base_freq[iden] * 5);
}
//identifier update for TDMA, Extended
if (MAC[1+len_a] == 0xF3)
{
state->p25_chan_iden = MAC[3+len_a] >> 4;
int iden = state->p25_chan_iden;
state->p25_chan_tdma[iden] = 1;
state->p25_chan_type[iden] = MAC[3+len_a] & 0xF;
state->p25_trans_off[iden] = (MAC[4+len_a] << 6) | (MAC[5+len_a] >> 2);
state->p25_chan_spac[iden] = ((MAC[5+len_a] & 0x3) << 8) | MAC[6+len_a];
state->p25_base_freq[iden] = (MAC[7+len_a] << 24) | (MAC[8+len_a] << 16) | (MAC[9+len_a] << 8) | (MAC[10+len_a] << 0);
int lwacn = (MAC[11+len_a] << 12) | (MAC[12+len_a] << 4) | ((MAC[13+len_a] & 0xF0) >> 4);
int lsysid = ((MAC[13+len_a] & 0xF) << 8) | MAC[14+len_a];
fprintf (stderr, "\n Identifier Update for TDMA - Extended\n");
fprintf (stderr, " Channel Identifier [%01X] Channel Type [%01X] Transmit Offset [%04X]\n Channel Spacing [%03X] Base Frequency [%08lX] [%09ld]",
state->p25_chan_iden, state->p25_chan_type[iden], state->p25_trans_off[iden], state->p25_chan_spac[iden], state->p25_base_freq[iden], state->p25_base_freq[iden] * 5);
fprintf (stderr, "\n WACN [%04X] SYSID [%04X]", lwacn, lsysid);
}
//Secondary Control Channel Broadcast, Explicit
if (MAC[1+len_a] == 0xE9)
{
int rfssid = MAC[2+len_a];
int siteid = MAC[3+len_a];
int channelt = (MAC[4+len_a] << 8) | MAC[5+len_a];
int channelr = (MAC[6+len_a] << 8) | MAC[7+len_a];
int sysclass = MAC[8+len_a];
if (1 == 1) //state->p2_is_lcch == 1
{
fprintf (stderr, "\n Secondary Control Channel Broadcast - Explicit\n");
fprintf (stderr, " RFSS [%03d] SITE ID [%03d] CHAN-T [%04X] CHAN-R [%04X] SSC [%02X]", rfssid, siteid, channelt, channelr, sysclass);
process_channel_to_freq (opts, state, channelt);
process_channel_to_freq (opts, state, channelr);
}
state->p2_siteid = siteid;
state->p2_rfssid = rfssid;
}
//Secondary Control Channel Broadcast, Implicit
if (MAC[1+len_a] == 0x79)
{
int rfssid = MAC[2+len_a];
int siteid = MAC[3+len_a];
int channel1 = (MAC[4+len_a] << 8) | MAC[5+len_a];
int sysclass1 = MAC[6+len_a];
int channel2 = (MAC[7+len_a] << 8) | MAC[8+len_a];
int sysclass2 = MAC[9+len_a];
long int freq1 = 0;
long int freq2 = 0;
if (1 == 1) //state->p2_is_lcch == 1
{
fprintf (stderr, "\n Secondary Control Channel Broadcast - Implicit\n");
fprintf (stderr, " RFSS[%03d] SITE ID [%03d] CHAN1 [%04X] SSC [%02X] CHAN2 [%04X] SSC [%02X]", rfssid, siteid, channel1, sysclass1, channel2, sysclass2);
freq1 = process_channel_to_freq (opts, state, channel1);
freq2 = process_channel_to_freq (opts, state, channel2);
}
//place the cc freq into the list at index 0 if 0 is empty so we can hunt for rotating CCs without user LCN list
if (state->trunk_lcn_freq[1] == 0)
{
state->trunk_lcn_freq[1] = freq1;
state->trunk_lcn_freq[2] = freq2;
state->lcn_freq_count = 3; //increment to three
}
state->p2_siteid = siteid;
state->p2_rfssid = rfssid;
}
//MFID90 Group Regroup Voice Channel User - Abbreviated
if (MAC[1+len_a] == 0x80 && MAC[2+len_a] == 0x90)
{
int gr = (MAC[4+len_a] << 8) | MAC[5+len_a];
int src = (MAC[6+len_a] << 16) | (MAC[7+len_a] << 8) | MAC[8+len_a];
fprintf (stderr, "\n VCH %d - Super Group %d SRC %d ", slot, gr, src);
fprintf (stderr, "MFID90 Group Regroup Voice");
state->gi[slot] = 0;
if (slot == 0)
{
state->lasttg = gr;
if (src != 0) state->lastsrc = src;
}
else
{
state->lasttgR = gr;
if (src != 0) state->lastsrcR = src;
}
}
//MFID90 Group Regroup Voice Channel User - Extended
if (MAC[1+len_a] == 0xA0 && MAC[2+len_a] == 0x90)
{
int gr = (MAC[5+len_a] << 8) | MAC[6+len_a];
int src = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
fprintf (stderr, "\n VCH %d - Super Group %d SRC %d ", slot, gr, src);
fprintf (stderr, "MFID90 Group Regroup Voice");
state->gi[slot] = 0;
uint32_t mfid90_wacn = (MAC[10+len_a] << 16) | (MAC[11+len_a] << 8) | (MAC[12+len_a] & 0xF0);
mfid90_wacn >>= 4;
uint16_t mfid90_sys = ((MAC[12+len_a] << 16) & 0x0F00)| (MAC[12+len_a] << 8);
fprintf (stderr, " EXT - FQSUID: %05X:%03X.%d", mfid90_wacn, mfid90_sys, src);
if (slot == 0)
{
state->lasttg = gr;
if (src != 0) state->lastsrc = src;
}
else
{
state->lasttgR = gr;
if (src != 0) state->lastsrcR = src;
}
}
//MFIDA4 Group Regroup Explicit Encryption Command
if (MAC[1+len_a] == 0xB0 && MAC[2+len_a] == 0xA4) //&& MAC[2+len_a] == 0xA4
{
int len_grg = MAC[3+len_a] & 0x3F; //MFID Len in Octets
int tga = MAC[4+len_a] >> 5; //3 bit TGA values from GRG_Options
int ssn = MAC[4+len_a] & 0x1F; //5 bit SSN from from GRG_Options
fprintf (stderr, "\n MFID A4 (Harris) Group Regroup Explicit Encryption Command\n");
// if (len_grg) fprintf (stderr, " Len: %02d", len_grg); //debug
if ( (tga & 4) == 4) fprintf (stderr, " Simulselect"); //one-way regroup
else fprintf (stderr, " Patch"); //two-way regroup
if (tga & 1) fprintf (stderr, " Active;"); //activated
else fprintf (stderr, " Inactive;"); //deactivated
//debug
// fprintf (stderr, " T:%d G:%d A:%d;", (tga >> 2) & 1, (tga >> 1) & 1, tga & 1);
fprintf (stderr, " SSN: %02d;", ssn);
if ( (tga & 0x2) == 2) //group WGID to supergroup
{
int sg = (MAC[5+len_a] << 8) | MAC[6+len_a];
int key = (MAC[7+len_a] << 8) | MAC[8+len_a];
int alg = MAC[9+len_a];
int t1 = (MAC[10+len_a] << 8) | MAC[11+len_a];
int t2 = (MAC[12+len_a] << 8) | MAC[13+len_a];
int t3 = (MAC[14+len_a] << 8) | MAC[15+len_a];
int t4 = (MAC[16+len_a] << 8) | MAC[17+len_a];
UNUSED4(t1, t2, t3, t4);
fprintf (stderr, " SG: %d; KEY: %04X; ALG: %02X;\n ", sg, key, alg);
int a = 0;
int wgid = 0;
//sanity check
// if ((len_grg + len_a > 20)) len_grg = 20 - len_a;
for (int i = 10; i <= len_grg;)
{
//failsafe to prevent oob array
if ( (i + len_a) > 20)
{
goto END_PDU;
}
wgid = (MAC[10+len_a+a] << 8) | MAC[11+len_a+a];
fprintf (stderr, "WGID: %d; ", wgid);
a = a + 2;
i = i + 2;
}
}
else if ( (tga & 0x2) == 0) //individual WUID to supergroup
{
int sg = (MAC[5+len_a] << 8) | MAC[6+len_a];
int key = (MAC[7+len_a] << 8) | MAC[8+len_a];
int t1 = (MAC[9+len_a] << 16) | (MAC[10+len_a] << 8) | MAC[11+len_a];
int t2 = (MAC[12+len_a] << 16) | (MAC[13+len_a] << 8) | MAC[14+len_a];
int t3 = (MAC[15+len_a] << 16) | (MAC[16+len_a] << 8) | MAC[17+len_a];
fprintf (stderr, " SG: %d KEY: %04X", sg, key);
fprintf (stderr, " WUID: %d; WUID: %d; WUID: %d; ", t1, t2, t3);
}
}
//Unit Registration Response -- Extended vPDU (MBT will not make it here)
if ( MAC[1+len_a] == 0xEC && MAC[0] != 0x07)
{
int res = (MAC[3+len_a] >> 2) & 0x3F;
int RV = (MAC[2+len_a] >> 0) & 0x3;
int src = (MAC[8+len_a] << 16) | (MAC[9+len_a] << 8) | MAC[10+len_a];
int uwacn = (MAC[4+len_a] << 12) | (MAC[5+len_a] << 4) | ((MAC[6+len_a] & 0xF0) >> 4);
int usys = ((MAC[6+len_a] & 0xF) << 8) | MAC[7+len_a];
fprintf (stderr, "\n Unit Registration Response - WACN: %05X; SYS: %03X; SRC: %d", uwacn, usys, src);
if (res) fprintf (stderr, " RES: %d;", res);
if (RV == 0) fprintf (stderr, " REG_ACCEPT;");
if (RV == 1) fprintf (stderr, " REG_FAIL;"); //RFSS was unable to verify
if (RV == 2) fprintf (stderr, " REG_DENY;"); //Not allowed at this location
if (RV == 3) fprintf (stderr, " REG_REFUSED;"); //WUID invalid but re-register after a user stimulus
fprintf (stderr, " - Extended;");
}
//Unit Registration Response -- Abbreviated TSBK and vPDU
if (MAC[1+len_a] == 0x6C)
{
/*
Unit Registration Response TSBK
P25 PDU Payload
[07][6C][01][EC][72][70][EC][72][70][EC][00][00]
[00][00][00][00][00][00][00][00][00][00][00][00]
*/
int k = 1; //vPDU is one octet higher than TSBK
if (MAC[len_a] == 0x07) k = 0;
int res = (MAC[2+len_a+k] >> 6) & 0x3;
int RV = (MAC[2+len_a+k] >> 4) & 0x3;
int usite = ((MAC[2+len_a+k] & 0xF) << 8) | MAC[3+len_a+k];
int sid = (MAC[4+len_a+k] << 16) | (MAC[5+len_a+k] << 8) | MAC[6+len_a+k];
int src = (MAC[7+len_a+k] << 16) | (MAC[8+len_a+k] << 8) | MAC[9+len_a+k];
fprintf (stderr, "\n Unit Registration Response - SITE: %03X SRC_ID: %d SRC: %d", usite, sid, src );
if (res) fprintf (stderr, " RES: %d;", res);
if (RV == 0) fprintf (stderr, " REG_ACCEPT;");
if (RV == 1) fprintf (stderr, " REG_FAIL;"); //RFSS was unable to verify
if (RV == 2) fprintf (stderr, " REG_DENY;"); //Not allowed at this location
if (RV == 3) fprintf (stderr, " REG_REFUSED;"); //WUID invalid but re-register after a user stimulus
}
//Unit Registration Command -- TSBK and vPDU
if (MAC[1+len_a] == 0x6D && MAC[0+len_a] != 0x07)
{
int k = 2; //vPDU is two octets higher than TSBK
if (MAC[len_a] == 0x07) k = 0;
int src = (MAC[2+len_a+k] << 16) | (MAC[3+len_a+k] << 8) | MAC[4+len_a+k];
int tgt = (MAC[5+len_a+k] << 16) | (MAC[6+len_a+k] << 8) | MAC[7+len_a+k];
fprintf (stderr, "\n Unit Registration - SRC: %d; TGT: %d;", src, tgt);
}
//Unit Deregistration Acknowlegement (TSBK and vPDU are the same)
if (MAC[1+len_a] == 0x6F)
{
int src = (MAC[7+len_a] << 16) | (MAC[8+len_a] << 8) | MAC[9+len_a];
int uwacn = (MAC[3+len_a] << 12) | (MAC[4+len_a] << 4) | ((MAC[5+len_a] & 0xF0) >> 4);
int usys = ((MAC[5+len_a] & 0xF) << 8) | MAC[6+len_a];
fprintf (stderr, "\n Unit Deregistration Acknowlegement - WACN: %05X; SYS: %03X; SRC: %d", uwacn, usys, src);
if (MAC[1+len_a] == 0xEF) fprintf (stderr, " - Extended;");
}
//Authentication Demand
if (MAC[1+len_a] == 0x71 || MAC[1+len_a] == 0xF1)
{
fprintf (stderr, "\n Authentication Demand;");
if (MAC[1+len_a] == 0xF1) fprintf (stderr, " - Extended;");
}
//Authentication FNE Response
if (MAC[1+len_a] == 0x72 || MAC[1+len_a] == 0xF2)
{
fprintf (stderr, "\n Authentication FNE Response;");
if (MAC[1+len_a] == 0xF2) fprintf (stderr, " - Extended;");
}
//MAC_Release for Forced/Unforced Audio or Call Preemption vPDU
if (MAC[1+len_a] == 0x31)
{
int uf = (MAC[2+len_a] >> 7) & 1;
int ca = (MAC[2+len_a] >> 6) & 1;
int resr1 = MAC[2+len_a] & 0x1F;
int add = (MAC[3+len_a] << 16) | (MAC[4+len_a] << 8) | MAC[5+len_a];
int resr2 = MAC[6+len_a] >> 4;
int cc = ( (MAC[6+len_a] & 0xF) << 8) | MAC[7+len_a];
fprintf (stderr, "\n MAC Release: ");
if(uf) fprintf (stderr, "Forced; ");
else fprintf (stderr, "Unforced; ");
if(ca) fprintf (stderr, "Audio Preemption; ");
else fprintf (stderr, "Call Preemption; ");
fprintf (stderr, "RES1: %d; ", resr1);
fprintf (stderr, "RES2: %d; ", resr2);
fprintf (stderr, "TGT: %d; ", add);
fprintf (stderr, "CC: %03X; ", cc);
// if (slot == 0) state->lastsrc = 0;
// if (slot == 1) state->lastsrcR = 0;
}
//1 or 21, group voice channel message, abb and ext
if (MAC[1+len_a] == 0x1 || MAC[1+len_a] == 0x21)
{
int svc = MAC[2+len_a];
int gr = (MAC[3+len_a] << 8) | MAC[4+len_a];
int src = (MAC[5+len_a] << 16) | (MAC[6+len_a] << 8) | MAC[7+len_a];
unsigned long long int src_suid = 0;
if (MAC[1+len_a] == 0x21)
{
src_suid = (MAC[8+len_a] << 48ULL) | (MAC[9+len_a] << 40ULL) | (MAC[10+len_a] << 32ULL) | (MAC[11+len_a] << 24ULL) |
(MAC[12+len_a] << 16ULL) | (MAC[13+len_a] << 8ULL) | (MAC[14+len_a] << 0ULL);
src = src_suid & 0xFFFFFF; //last 24 of completed SUID?
}
fprintf (stderr, "\n VCH %d - TG: %d; SRC: %d; ", slot, gr, src);
if (MAC[1+len_a] == 0x21) fprintf (stderr, "SUID: %08llX-%08d; ", src_suid >> 24, src);
if (svc & 0x80) fprintf (stderr, " Emergency");
if (svc & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (svc & 0x20) fprintf (stderr, " Duplex");
if (svc & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", svc & 0x7); //call priority
}
fprintf (stderr, " Group Voice");
state->gi[slot] = 0;
sprintf (state->call_string[slot], " Group ");
if (svc & 0x80) strcat (state->call_string[slot], " Emergency ");
else if (svc & 0x40) strcat (state->call_string[slot], " Encrypted ");
else strcat (state->call_string[slot], " ");
if (MAC[1+len_a] == 0x21) fprintf (stderr, " - Extended ");
else fprintf (stderr, " - Abbreviated ");
if (slot == 0)
{
state->lasttg = gr;
if (src != 0) state->lastsrc = src;
}
else
{
state->lasttgR = gr;
if (src != 0) state->lastsrcR = src;
}
}
//1 or 21, unit to unit voice channel message, abb and ext
if (MAC[1+len_a] == 0x2 || MAC[1+len_a] == 0x22)
{
int svc = MAC[2+len_a];
int gr = (MAC[3+len_a] << 16) | (MAC[4+len_a] << 8) | MAC[5+len_a];
int src = (MAC[6+len_a] << 16) | (MAC[7+len_a] << 8) | MAC[8+len_a];
unsigned long long int src_suid = 0;
if (MAC[1+len_a] == 0x21)
{
src_suid = (MAC[9+len_a] << 48ULL) | (MAC[10+len_a] << 40ULL) | (MAC[11+len_a] << 32ULL) | (MAC[12+len_a] << 24ULL) |
(MAC[13+len_a] << 16ULL) | (MAC[14+len_a] << 8ULL) | (MAC[15+len_a] << 0ULL);
src = src_suid & 0xFFFFFF;
}
fprintf (stderr, "\n VCH %d - TGT: %d; SRC %d; ", slot, gr, src);
if (MAC[1+len_a] == 0x22) fprintf (stderr, "SUID: %08llX-%08d; ", src_suid >> 24, src);
if (svc & 0x80) fprintf (stderr, " Emergency");
if (svc & 0x40) fprintf (stderr, " Encrypted");
if (opts->payload == 1) //hide behind payload due to len
{
if (svc & 0x20) fprintf (stderr, " Duplex");
if (svc & 0x10) fprintf (stderr, " Packet");
else fprintf (stderr, " Circuit");
if (svc & 0x8) fprintf (stderr, " R"); //reserved bit is on
fprintf (stderr, " Priority %d", svc & 0x7); //call priority
}
fprintf (stderr, " Unit to Unit Voice");
state->gi[slot] = 1;
sprintf (state->call_string[slot], " Private ");
if (svc & 0x80) strcat (state->call_string[slot], " Emergency ");
else if (svc & 0x40) strcat (state->call_string[slot], " Encrypted ");
else strcat (state->call_string[slot], " ");
if (slot == 0)
{
state->lasttg = gr;
if (src != 0) state->lastsrc = src;
}
else
{
state->lasttgR = gr;
if (src != 0) state->lastsrcR = src;
}
}
//network status broadcast, abbreviated
if (MAC[1+len_a] == 0x7B)
{
int lra = MAC[2+len_a];
int lwacn = (MAC[3+len_a] << 12) | (MAC[4+len_a] << 4) | ((MAC[5+len_a] & 0xF0) >> 4);
int lsysid = ((MAC[5+len_a] & 0xF) << 8) | MAC[6+len_a];
int channel = (MAC[7+len_a] << 8) | MAC[8+len_a];
int sysclass = MAC[9+len_a];
int lcolorcode = ((MAC[10+len_a] & 0xF) << 8) | MAC[11+len_a];
UNUSED(sysclass);
fprintf (stderr, "\n Network Status Broadcast - Abbreviated \n");
fprintf (stderr, " LRA [%02X] WACN [%05X] SYSID [%03X] NAC [%03X] CHAN-T [%04X]", lra, lwacn, lsysid, lcolorcode, channel);
state->p25_cc_freq = process_channel_to_freq (opts, state, channel);
state->p25_cc_is_tdma = 1; //flag on for CC tuning purposes when system is qpsk
if (state->p2_hardset == 0 ) //state->p2_is_lcch == 1 shim until CRC is working, prevent bogus data
{
state->p2_wacn = lwacn;
state->p2_sysid = lsysid;
state->p2_cc = lcolorcode;
}
//place the cc freq into the list at index 0 if 0 is empty, or not the same,
//so we can hunt for rotating CCs without user LCN list
if (state->trunk_lcn_freq[0] == 0 || state->trunk_lcn_freq[0] != state->p25_cc_freq)
{
state->trunk_lcn_freq[0] = state->p25_cc_freq;
}
}
//network status broadcast, extended
if (MAC[1+len_a] == 0xFB)
{
int lra = MAC[2+len_a];
int lwacn = (MAC[3+len_a] << 12) | (MAC[4+len_a] << 4) | ((MAC[5+len_a] & 0xF0) >> 4);
int lsysid = ((MAC[5+len_a] & 0xF) << 8) | MAC[6+len_a];
int channelt = (MAC[7+len_a] << 8) | MAC[8+len_a];
int channelr = (MAC[9+len_a] << 8) | MAC[10+len_a];
int sysclass = MAC[9+len_a];
int lcolorcode = ((MAC[12+len_a] & 0xF) << 8) | MAC[13+len_a];
UNUSED(sysclass);
fprintf (stderr, "\n Network Status Broadcast - Extended \n");
fprintf (stderr, " LRA [%02X] WACN [%05X] SYSID [%03X] NAC [%03X] CHAN-T [%04X] CHAN-R [%04X]", lra, lwacn, lsysid, lcolorcode, channelt, channelr);
state->p25_cc_freq = process_channel_to_freq (opts, state, channelt);
process_channel_to_freq (opts, state, channelr);
state->p25_cc_is_tdma = 1; //flag on for CC tuning purposes when system is qpsk
if (state->p2_hardset == 0 ) //state->p2_is_lcch == 1 shim until CRC is working, prevent bogus data
{
state->p2_wacn = lwacn;
state->p2_sysid = lsysid;
state->p2_cc = lcolorcode;
}
}
//Adjacent Status Broadcast, abbreviated
if (MAC[1+len_a] == 0x7C)
{
int lra = MAC[2+len_a];
int cfva = MAC[3+len_a] >> 4;
int lsysid = ((MAC[3+len_a] & 0xF) << 8) | MAC[4+len_a];
int rfssid = MAC[5+len_a];
int siteid = MAC[6+len_a];
int channelt = (MAC[7+len_a] << 8) | MAC[8+len_a];
int sysclass = MAC[9+len_a];
fprintf (stderr, "\n Adjacent Status Broadcast - Abbreviated\n");
fprintf (stderr, " LRA [%02X] RFSS[%03d] SITE [%03d] SYSID [%03X] CHAN-T [%04X] SSC [%02X]\n ", lra, rfssid, siteid, lsysid, channelt, sysclass);
if (cfva & 0x8) fprintf (stderr, " Conventional");
if (cfva & 0x4) fprintf (stderr, " Failure Condition");
if (cfva & 0x2) fprintf (stderr, " Up to Date (Correct)");
else fprintf (stderr, " Last Known");
if (cfva & 0x1) fprintf (stderr, " Valid RFSS Connection Active");
process_channel_to_freq (opts, state, channelt);
}
//Adjacent Status Broadcast, extended
if (MAC[1+len_a] == 0xFC)
{
int lra = MAC[2+len_a];
int cfva = MAC[3+len_a] >> 4;
int lsysid = ((MAC[3+len_a] & 0xF) << 8) | MAC[4+len_a];
int rfssid = MAC[5+len_a];
int siteid = MAC[6+len_a];
int channelt = (MAC[7+len_a] << 8) | MAC[8+len_a];
int channelr = (MAC[9+len_a] << 8) | MAC[10+len_a];
int sysclass = MAC[11+len_a]; //need to re-check this
fprintf (stderr, "\n Adjacent Status Broadcast - Extended\n");
fprintf (stderr, " LRA [%02X] RFSS[%03d] SITE [%03d] SYSID [%03X] CHAN-T [%04X] CHAN-R [%04X] SSC [%02X]\n ", lra, rfssid, siteid, lsysid, channelt, channelr, sysclass);
if (cfva & 0x8) fprintf (stderr, " Conventional");
if (cfva & 0x4) fprintf (stderr, " Failure Condition");
if (cfva & 0x2) fprintf (stderr, " Up to Date (Correct)");
else fprintf (stderr, " Last Known");
if (cfva & 0x1) fprintf (stderr, " Valid RFSS Connection Active");
process_channel_to_freq (opts, state, channelt);
process_channel_to_freq (opts, state, channelr);
}
SKIPCALL: ; //do nothing
if ( (len_b + len_c) < 24 && len_c != 0)
{
len_a = len_b;
}
else
{
goto END_PDU;
}
}
END_PDU:
state->p2_is_lcch = 0;
//debug printing
if (opts->payload == 1 && MAC[1] != 0) //print only if not a null type //&& MAC[1] != 0 //&& MAC[2] != 0
{
fprintf (stderr, "%s", KCYN);
fprintf (stderr, "\n P25 PDU Payload\n ");
for (int i = 0; i < 24; i++)
{
fprintf (stderr, "[%02llX]", MAC[i]);
if (i == 11) fprintf (stderr, "\n ");
}
fprintf (stderr, "%s", KNRM);
}
}
Reference in New Issue View Git Blame Copy Permalink