dibit past the length of the array. Issue likely occurs when a partial/incomplete put operation adds a dibit and increments the buffer pointer but the thread is interrupted prior to wrapping the buffer pointer. When the next runnable iteration executes, the pointer is pointing past the end of the buffer. Updates the code to check the pointer both before and after the put operation.
Co-authored-by: Dennis Sheirer <dsheirer@github.com>
Notes on usage:
- When using either AM or FM squelch control use either the Heterodyne channelizer or if using the Polyphase channelizer, avoid using trunk tracking decoders like DMR or P25 or set the squelch threshold high enough to avoid changes in noise floor from polyphase channelizer where it can vary between using the one channel or the two-channel combined channel sources.
Co-authored-by: Dennis Sheirer <dsheirer@github.com>
-Reduces message and event histories per channel from 500 to 200.
-Resolves issue of tuner freezing due to cancelled USB transfer buffers not being resubmitted.
-Reworks the audio playback system to remove in-progress call preemption and remove thread locks which can cause glitchy behavior during audio playback.
-Updates audio outputs to also use single thread pool for processing audio segments.
-Updates MBECallSequenceConverter to batch convert MBE to WAV audio.
-Unifies recording filename prefixes across baseband, mbe and binary recordings.
-Resolves issue with registering heartbeat manager to dispatcher.
-Uses single-thread thread pools for Dispatcher to support batch & process to overcome context switching consistency issue in Windows.
Co-authored-by: Dennis Sheirer <dsheirer@github.com>
Identified and resolved issue where a 2-stream polyphase synthesizer was being updated with an incorrectly designed synthesis filter which was causing massive droop on the second half of the reconstructed channel. Oddly enough, this didn't seem to impact the P25 decoders, but it may have impacted other decoding.
Identified and resolved issue with concurrent modification of the modules list in the processing chain associated with recent addition of the channel FFT view in the channel power tab.
Co-authored-by: Dennis Sheirer <dsheirer@github.com>
Updates HackRF native byte buffers with automatic DC removal.
Creates new half-band channel source to replace the cic-based channel source in the heterodyne channelizer. Resolves issue in RTL native buffer processing. Creates a CACHED thread pool and reduces the number of threads for the SCHEDULED thread pool to 2. Changes each of the channel source implementations to use a dedicated thread (Dispatcher class) instead of the scheduled thread pool, to reduce the amount of buffered/retained samples objects in memory. Lots of other small changes and tweaks.
Removes last of Reusable buffer code. Updates DFTProcessor to use a single thread scheduled executor. Updates Polyphase channelizer to use threads instead of an executor. Removes a number of unused classes.
Commenting out window calibration. Scalar is faster in both implementations.
Adds vector and scalar implementations for windows. Repackages window and window type classes.
WIP adds vector implementations for Airspy non-interleaved buffer iterator and calibration plugins for both interleaved and non-interleaved buffer iterators.
WIP adds vector implementations for Airspy interleaved buffer iterator.
Work on developing scalar and vector implementations of airspy sample conversion and airspy native buffer processing.
Introduces new INativeBuffer framework where tuner raw samples are retained in their native (compressed) format until when they're needed and they are converted on-demand into smaller complex sample buffers to aid garbage collection.
Removes all usage of ReusableComplexBuffers and ReusableChannelREsultsBuffers. Updates polyphase channelizer to be more efficient in output channel processing.
Updates ViterbiDecoder to change Map usage to array for memory efficiency.
Updates channel processors to used scalar implementation for gain and mixer, until the polyphase channel results can be fixed to be a multiple of the SIMD lane width.
Resolves final changes for the conversion from interleaved sample arrays to complexsamples buffers for distributing baseband samples to channels and processing chains.
Updates tuner channel sources and all decoders to receive new complex samples buffers, removing the previous reusable complex buffers as the default baseband samples buffer object.
Still to resolve is the ComplexMixer implementations. Needs validation and a calibration implementation with an update to the complex mixer factory.
Updates the DMR decoder to use optimal (scalar vs vector) implementations of filter and AGC controls.
Updates the AM demodulator for separated I&Q float sample processing.
Code review and testing changes.
updates build script for runtime configuration.
Integrates calibration manager with main sdrtrunk application. Updates NBFMDecoder to use new optimized FIR and Decimation filter options.
Updates real half-band decimation filters to select the optimal (scalar vs vector) implementation.
Adds calibration manager plugins.
Adds calibration manager and plugins to determine the optimal (scalar vs vector) implementation type to use for various classes of dsp components.
Adds vector squelching FM demodulator and cleans up the IIR filter and power squelch to use all floats.
Adds vector implementation of FM demodulator. This introduces a new interface that accepts i/q samples as two separate float arrays, versus an interleaved array, which enables more efficient processing. This new complex sample interface will be used across the codebase eventually.
Adds ComplexOscillator and a SIMD version VectorComplexOscillator. Deprecates the LowPhaseNoiseOscillator because the ComplexOscillator is about 35% faster. The vectorized version is about 43% faster when SIMD lane width is 8x.
Adds new vector complex filters and new real oscillators. Note: the RealOscillator using straight Java math sin() function is 3x slower than the existing legacy implementation. Will replace this with a complex oscillator that only uses the real part.
Updates ComplexFIRFilter to be 50% more efficient.
Adds 23 tap filter implementations. Will not add 63-tap implementations because they are slower than the default vector implementation.
Adds 15-tap customized vector half band filters.
Adds initial custom complex vector half-band decimation filters for 11-tap and 15-tap decimation filters..
Adds vector complex half band filter implementations. Note: performance of the generic 64-bit 2-lane filter is horrible and is not included.
Optimizes complex half-band filter to be 27% more efficient.
Implements vectorized real half-band filter implementations.
Implements a new FIR filter class that processes sample buffers instead of single sample at a time.
Refactored all of the calibratons to be time-duration based. Testing on windows i7 gen 3 CPU showed that it took 1000x longer for one of the calibrations to run, versus my AMD 5800x.
Changed gradle jvm args so that the windows plaf export is always applied.
Updates gradle build script to ensure incubator module is included and to cleanup javafx library management for building runtime images.
Testing tweaks and changes.
Adds logging limiter to dispatcher for buffer overflows
Adds User Preferences editor for performing Vector/SIMD calibrations and new startup dialog prompting the user to perform calibrations.
Updates calibration manager and all calibration implementations to add warm-up and test phases and to reduce the overall time it takes to calibrate a system.
Co-authored-by: Dennis Sheirer <dsheirer@github.com>
There may be two separate formats that are used for LRRP position fields where one treats the value as a two's complement field and the other as a 1-bit hemisphere indicator followed by a 31-bit positive integer. If so, we'll need to expose a user-selectable flag to toggle one format or the other.
For now, this change won't impact any Northern hemisphere users.
Co-authored-by: Dennis Sheirer <dsheirer@github.com>
* Add failing test for toCSV()
* Add missing " to timeslot value
* Add failing test for quotes and commas in details
* Separate comma and quote tests
* Escape toCSV cells using utility
* Use CSVFormatter instead of escape utils
Allows us to control exactly how we want to format a CSV-valid row.
* Never have a null cell
Instead of using a stream map, opting for an explicit handling so the logger can explode when an unexpected null shows up. Prevents the situation where things are mysteriously blank, forcing developers to handle known null scenarios.
