better handle processing and shutdowns.
-Reuses transfers between tuner start/stop invocations
-Moves libusb transfer status direct byte buffer allocation out of
buffer processing thread and reuses it, saving a lot of memory
allocations over time.
shared across multiple tuners of the same type, unless the user created
a new tuner configuration for each tuner.
Updated code to create a default tuner configuration based on the tuner
type, but name the configuration as 'Default-UNIQUETUNERID', so that any
changes to that uniquely identified tuner will persist across sessions.
Note: this does not avoid the situation where multiple tuners of the
same type are all using the same default serial number (e.g. 0000001).
In this case, they will all still share the same configuraiton. User
must change the serial number of the dongle in order for it to be
uniquely identifiable, so that we can correctly lookup the configuration
for the specific tuner.
haven't yet been initialized. This occurs when there is a channel
allocated from the tuner that is the first/only listener and then is
immediately released. Some of the buffers are in motion and the others
simply haven't yet been initialized.
saturation.
Each tunerchannelsource was sharing a thread pool and as the processing
load increased, the thread pool was not expanding and the processing
tasks were backing up, causing the buffers to grow with unprocessed
data.
Changed so that each tuner channel source is handed a thread pool to use
for processing incoming sample data. Processing chain maintains the
thread pool and starts the channel source. This allows traffic channels
to reuse the thread pool across multiple iterations.
specifically for P25 C4FM frequency tracking.
-Clarifies frequency change event naming and adds request/notitification
events for channel frequency correction type events
-Removes DC offset filter from P25 C4FM demodulator which was operating
independently of the AFC tracking component within the C4FM symbol
filter.
-Changed FCD tuner center DC spike buffer size after detecting that the
DC center spike was influencing the P25 C4FM filter frequency tracker
whenever the tuner's center frequency was changed to bring the channel
boundary within 3 kHz of the center spike -- set it to 5 kHz to provide
a better buffer.
-Updated spectral channel display to provide better indication of
automatic frequency control (yellow line) versus channel frequency
calculation when additional channels are allocated.
Incorporates tuner specific definition of overall usable bandwidth, so
that tuners like airspy can specify 90% of 10 MHz (ie 9 MHz) is truly
usable and the fringe 10% is unusable rolloff.
Also includes tuner-specific defining of the width of the central spike,
or a value of 0 indicates that the entire range is usable (ie airspy).
Resolves issue with tuning RTL2832 based tuners into the range of
799.555894 and 801.584395. The pre-defined sample rates were slightly
off and causing issues with this tuning range. I recalculated the
sample rates and removed any that were not integral multiples of the
48,000 Hz desired channel rate.
Updated the sample bit depth for RTL2832 and HackRF tuners. Even though
the sample bit depth is 8 bits for each, the displayed noise floor was
off, so I increased the bit depth for each.
component.
-Airspy supported with 10 and 2.5 MSps sample rates. Additional
decimation may be added later.
-Spectral display updated to include smoothing and filtering options.
Note: the decimated output of a tuner channel from the airspy is
48,076.9 samples per second, versus the normal 48 kHz decimated rate.
This is 1.0015 times the normal rate and doesn't appear to impact the
decoders or audio processing. Therefore, no fractional resampling has
been added.
Note: Several of the decoders are currently non-functioning in this
commit. If you want the latest functioning codebase, please checkout
the commit prior to this one. All decoders will eventually be updated
with this new architecture.
Currently broken:
- Logging and recording
- Aux decoders (Fleetsync/MDC/LoJack/Tait)
- LTR/Passport decoders
Changes in this commit:
- Module architecture for decoders and components with central
provisioning by the DecoderFactory
- Transition from Complex sample stream processing to float buffer
processing for improved memory management
- Redesigned filter structures - to support buffers and streams
- Resolved several memory leak issues
- Universal sharing of the thread pool manager
- Added centralized audio management with call/user prioritization and
new gui with mute/volume controls
- Embedded audio metadata for eventual streaming support
- Redesigned ProcessingChain to support independent re-use
- Added new TrafficChannelManager to handle traffic channel allocations
- Traffic Channel pool size and Call timeout available in P25 and
MPT1327 configs
- Redesigned channel and decoder gui components
Changed C4FM symbol filter to reset frequency tracking values when the tuner's frequency or PPM values change.
Moved all frequency control pieces into the source.tuner.frequency package.
Memory Fixes
Decreased the decimation process repeat timing so that it runs smaller work chunks more often
Decreased scheduled thread pool to 2 hot threads
Wrapped all scheduled thread pool runnables in try/catch blocks so that an exception doesn't kill the sample buffer processing thread and cause the buffer to grow unbounded.
P25 updates
Moved TSBK crc checks into the message framer so that message corrections don't occur after the message is constructed.
Added more functionality to the channel state for handling registrations and call events.
Converted to use float primitives and to keep samples in buffer format until the sample rate is decimated to 48kHz.
Added new non-recursive, CIC decimation filter -- untested
Updated sound card/mixer input source management. Now testing for mono/stereo support for each card and limiting channel choices accordingly. Separated the mixersource into a ComplexMixer and and SimplexMixerSource. The ComplexMixer is used for sound card based tuners like the funcube. The SimplexMixerSource is used for demodulated sound card inputs.
Interfaces for sample handling - standardized on using 'Complex' to indicate I/Q samples and 'Simplex' to indicate demodulated float samples. The processing chain now accepts either a decimated (48k) list of complex samples from a tuner channel source, or a 48k simplex buffer (array of demodulated float samples).
Resolved issue with HackRF tuner not applying tuner configuration information.
- Adds Channel Spectrum tab to display FFT of the audio output of the currently selected channel
- Upgrades to JTransforms 3.0 FFT library
- Adds three new context menus to main and channel spectral displays:
-- Baseline - affects the vertical rendering baseline of the FFT
-- Amplification - affects the vertical height of each FFT bin
-- Averaging - affects how many FFTs are averaged to produce the display
NOTE: only the gui components and settings handling have been implemented. Actual recording playback is not yet implemented.
Partial checkin of initial P25 decoder development.
NOTE: P25 decoder is not yet functional.
