Adds 500 ms delay to initial registering for samples from all tuners to
feed the spectral display/waterfall. The existing approach of immediately
registering for samples was causing the airspy tuner to lockup
aperiodically. Investigation via debugger didn't show any application
thread locks ... usb master processor was continuing to service libusb
timeouts. Unable to debug internal airspy processes. Adding the delay
to startup seems to be a usable solution.
Updates decoder types to specify channel sample rate and pass/stop
frequencies for requested channels. Updates tuner channel source
managers to accept a channel specification for channels that are
allocated.
and auto-correction for R820T tuners.
-Updated TunerModel and TunerViewPanel to add 2 new columns to
display the current tuner's PPM setting and (when available) the
measured frequency error averaged over 5 second intervals provided by
certain decoders (e.g. P25 C4FM and LSM). Frequency error value from
P25 decoders is provided from the Costas Loop PLL once 2 or more P25
message sync events have been observed in a short period.
-Updated R820T tuner to auto-correct PPM when measured frequency error
exceeds the +/- 0.4PPM threshold for a period of 30 seconds or more.
Feature can be enabled/disabled by user in the tuner editor panel.
Resolved several issues with P25 C4FM/LSM decoders that was impacting
performance related to channel misalignment from tuner PPM offsets.
Adds capability to disable spectral display.
Adds right-click context
menu items to disable display and/or reenable display by selecting
another tuner.
Adds view menu items to disable spectral display or show a tuner.
Persists spectral display enabled state across application run sessions.
sample rates.
Resolves issue in PolyphaseChannelManager responding to sample rate
changes in the tuner. The manager now recreates the channelizer when
needed if the tuner's sample rate has changed since the last time the
channelizer was used.
Updates the Tuner selection view to reflect tuner lock state. Updates
the tuner editors to enable/disable frequency controller and sample
rate controls according to the tuner's lock state.
updates the LSM decoder to follow the same design pattern. Adds LSM
decoder support to the demodulator viewer application. The current
symbol timing gain for LSM is set too high -- is using the C4FM gain
and causes too much fluctuation in the timing error.
so that on startup, the application attempts to source the channel from
the preferred tuner.
If the tuner is currently not available, or if the tuner cannot source
the channel, then the next available tuner is selected.
complex buffer listeners. Removes complex buffer broadcast support from
the source manager and renames it to channel source manager to convey
that it's only responsible for providing channels from the tuner.
center frequency each time we allocate a new DDC/channel. Adds
support for broadcasting channel count change source events so that the
tuner can accurately convey sourced channel counts via tuner events.
Completes changeover of polyphase channel manager to support arbitrary
bandwidth channels. The new approach provides greater compatibility
across any tuner sample rates. Likewise, all decoders will have to be
updated to adapt to any channel sample rate, although channel bandwidths
will be at least 12.5 kHz and likely no more than 25.0 kHz, with a 2x
oversampling that produces channel sample rates in range 25.0 - 50.0
kHz.
