Commit Graph

61 Commits

Author SHA1 Message Date
Denny Sheirer
8431fe66ad #2717 Tuners tab converted to JavaFX with a new frequency control. (#2720)
- New FrequencyControl replaces JFrequencyControl: MHz to 1 Hz, hover a digit and scroll or click its upper/lower half to step it (with carry, clamped to the tuner's range), or type a frequency (e.g. 851.0125) and press Enter.  Arrow keys move between digits and step them.  Copy/paste supported.
- Tuners tab redesigned: tuner list with status pills and configurable columns, Add Tuner menu, and a sectioned editor (header with status, enable switch, spectrum/record/restart; Tuning; Gain; Options; Frequency Correction; collapsible Frequency Limits).
- All tuner editors converted to JavaFX with their full set of controls.  RSP editors share option bindings in RspTunerEditor.
- Add recording and network tuner dialogs converted to JavaFX dialogs.
- DiscoveredTunerModel is no longer a Swing table model.
- Fixes: FCD Pro gain/phase correction loaded swapped; RSPdx saved the FM notch as the DAB notch and never applied the HDR bandwidth; RSP2 external reference output and network tuner PPM weren't saved; Airspy/HydraSDR gain mode changes now apply the mode's gains.

Co-authored-by: denny <dennis.sheirer@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-20 04:36:12 -05:00
Denny Sheirer
8324233acb #2704 Waterfall contrast for weak signals relative to the noise floor (#2712)
The waterfall mapped 256 palette indexes over the absolute dBFS level of the
mean bin value, about 2.5 steps per dB at a -100 dBFS floor, so weak signals
were only a few steps above the noise.  WaterfallScaler now tracks the noise
floor as a smoothed 25th percentile of the bins (robust to occupied spans) and
maps a fixed 45 dB span above it, so contrast no longer depends on sample size,
DFT size or tuner gain.  The classic palette's flat blue blocks are replaced
with a blue ramp over the bottom quarter, where the noise floor now sits.

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-20 02:47:57 -05:00
Denny Sheirer
838e7708c0 #2713 HistoryTableViewTest fires the platform copy shortcut (Cmd-C on macOS) (#2714)
The copy handler matches KeyCombination.SHORTCUT_DOWN, which is Meta on
macOS, but the test always fired Ctrl-C, so nothing was copied on the Mac
CI runner.

Co-authored-by: denny <dennis.sheirer@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-20 02:43:38 -05:00
Denny Sheirer
d3a9adc06f #2697 talker alias auto-add only creates one alias for both the radio id and the fully qualified radio id when both are transmitted on the system (#2705)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-19 03:59:44 -05:00
Wahaj18
6d89a604c3 Copy selected event and message rows with Ctrl-C (#2691)
The JavaFX Now Playing tables lost the Swing JTable copy action, so Ctrl-C
in the Events and Messages tabs did nothing. The history table now allows
selecting several rows and copies them to the clipboard, one line per row
with the visible column values separated by tabs, as the Swing table did.

Fixes #2687
2026-11-19 02:48:03 -05:00
GTR8000
3473150ee9 Preserve user radio aliases outside the Talker Alias group (#2689)
Limit automatic renaming to the existing managed group. Keep exact-match user aliases outside that group unchanged without creating duplicates, while retaining confirmation and multi-identifier protections for managed aliases. Explain moving aliases out of the group in the tooltip and cover custom, ungrouped, managed and moved aliases in regression tests.
2026-11-18 03:47:35 -05:00
Denny Sheirer
f302d46be1 #2672 Polyphase channelizer enhancements to address buffer sizing and management
#2672 Bounds the polyphase buffer queue by sample duration instead of buffer count

The polyphase buffer processor queue was capped at 500 native buffers, which is only about 85 ms of samples for an RSP at 6 MSPS (about 1,000 samples per buffer) versus about 6.8 s for an RTL-SDR (32,768 samples per buffer).  Short processing stalls overflowed the queue and dropped buffers on RSP tuners.

- Dispatcher: adds a weight-bounded queue option (element weigher plus an  adjustable maximum queued weight).  Elements count toward the weight until  the listener has processed them.
- PolyphaseChannelManager: bounds the buffer queue at 1 second of samples and  updates the bound when the tuner sample rate changes.
- RspNativeBuffer: sampleCount() returned twice the complex sample count.  This  also corrects the tuner sample drop monitor and the spectral display buffer manager for RSP tuners.

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-18 03:05:39 -05:00
Denny Sheirer
f47479b8d4 #2681 JavaFX Map Redesign
#2681 Map tab as a JavaFX component

Replaces the Swing JXMapViewer map with a pure JavaFX canvas tile map in gui/map:
OpenStreetMap tiles with a memory and disk cache, track, Radio Reference site and
user location layers, the site hover card and context menu, and the map controls.
Removes the bundled SwingX map viewer copy and moves GeoPosition to the map package.

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-18 02:29:58 -05:00
Denny Sheirer
7a7364839b #2680 Alias List optionally auto-adds/upates radio ID to talker alias value. Enable the feature in the playlist editor in the channel config for protocols that produce talker alias (P25, NXDN, DMR). (#2682)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-17 03:52:59 -05:00
Denny Sheirer
2213544eec #2676 Alias List optionally tracks radio reference system with optional auto-update for talkgroup alias changes. (#2679)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-17 03:24:29 -05:00
Denny Sheirer
feeedb7c29 #2671 Spectral display right click on signal context menu radio reference options. Unifies the popout card to channels in order: 1) in playlist and enabled, in playlist, in radio reference, ordered by distance from the user's my location (#2675)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-17 02:25:50 -05:00
Denny Sheirer
6dd06288ac #2669 Adds System & Site columns to Now Playing, hidden by default (#2670)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-16 03:34:58 -05:00
Denny Sheirer
80754558d6 #2662 Tuners monitor sample rate and log on excessive dropped samples. (#2663)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-16 03:02:11 -05:00
Denny Sheirer
5474a5a448 #2660 Now Playing Update With Talker Column & Column Management (#2661)
* #2660 Now Playing panel with events and messages are all recreated as JavaFX panels

* #2660 Talker alias cleanup across the decoders

* #2660 Talker alias cleanup across the decoders

---------

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-15 07:43:04 -05:00
Denny Sheirer
c93d099742 #2658 DMR additional error detection and correction enhancements (#2659)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-15 04:04:34 -05:00
Denny Sheirer
be0966653b #2656 DMR Hamming and BPTC error detection and correction algorithm enhancements (#2657)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-15 03:46:55 -05:00
Jared Szechy
9deabd0dcc Network tuner support - rtl_tcp (#2471)
* Add network tuner dialog

* wip: network tuner configs

* wip stash

* working tcp solution

* fix copyright headers

* fix: resolve rebase conflicts from jRTL library changeover

- Drop redundant JFrequencyControl digit-sizing fix now that upstream
  fixes the same issue via setColumns(1)
- Mark SUPPORTED_NETWORK_TUNERS final to match the new EnumSet style
- Replace removed SampleRate.getClosest() with a local nearest-match
  helper in NetworkTunerEditor

* Add mise config
2026-11-15 03:32:02 -05:00
Denny Sheirer
5bce541631 #2641 Enhanced radio reference integration. With a premium subscription and when you set your location on the map, the Spectral display includes radio reference layer that presents popup card in the spectrum that shows candidate systems or frequencies ordered by distance from your location. Background thread builds an offline cache of data to support this. Map plots this cache as tower pins on the map and you can hover and active site frequencies from the map. (#2642)
Updates sdrtrunk to use latest radio reference api jar.

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-14 09:37:29 -05:00
Denny Sheirer
9641d2ef59 #736 New JavaFX spectral display and waterfall for both tuner and channel spectrums. (#2637)
* Popout configuration panel (top-left of display)
* Themed color support
* Reworked signal averating/smoothing
* Optional decibel overlay with corrected decibel calculations
* Integrated noise floor slider in  channel view
* Traffic channel overlays
* Popup channel information when hovering over playlist channels.
* Removes legacy swing components.

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-13 07:30:31 -05:00
Denny Sheirer
73fc85aa76 #1045 P25 encrypted call ignore setting. Cleanup several other errors. (#2636)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-13 05:14:45 -05:00
Christopher Smith
1a90eaf6c6 P25P1: decode unconfirmed data PDUs with a packet data SAP as IP packets (#2506)
PDU header format 0x15 is the generic unconfirmed data header; unconfirmed
multi-block trunking control (UMBTC) is only its trunking control SAP
(61/63) use.  PDUHeaderFactory built a plain PDUHeader for every 0x15
header and PDUMessageFactory sent every such sequence to createUMBTC(), so
outbound unconfirmed IP data (SNDCP RF UNCONFIRMED DATA with SAP 0, 4 or
6) was logged raw as

  PDU HEADER FORMAT:UNCONFIRMED MBTC UNCONFIRMED VENDOR:STANDARD TO LLID:n
  DATA BLOCKS:4 MSG:4100450000...

while the confirmed equivalent (format 0x16) was decoded as IPPKT with
its LRRP / ARS payload.

- PDUHeaderFactory: build a PacketHeader for a 0x15 header whose SAP is
  UNENCRYPTED_USER_DATA, PACKET_DATA or SNDCP_PACKET_DATA_CONTROL.  Other
  SAPs, including trunking control 61/63, keep the plain PDUHeader.
- PDUMessageFactory: route a 0x15 sequence whose header is a PacketHeader
  through createPacketData(); everything else stays on the UMBTC path.

No payload changes are needed: PacketMessage already sizes unconfirmed
data blocks at 12 octets, and the header fields it uses (SAP, pad octet
count, data header offset) sit at the same bit positions in the confirmed
and unconfirmed headers.  The ARS RegistrationAcknowledgement parser only
reads the extension octet, so the 5-octet trailer (0x04 + 32-bit time)
some systems append does not affect it.

Adds PDUMessageFactoryTest, built from two unconfirmed PDUs captured on a
Motorola P25 Phase 1 system (ARS registration acknowledgements to UDP
port 4005, one with the trailer), plus header routing checks for SAP
0/4/6, SAP 61/63 and the confirmed 0x16 header.

Co-authored-by: csmith_ai <carrottop@gmail.com>
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-11-13 02:42:53 -05:00
Christopher Smith
fbc54a38dd LRRP: decode request token values as 7-bit varints and correct request token names (#2507)
Motorola LRRP request tokens that carry an integer (trigger interval
0x31, trigger distance 0x78 and the unknown parameters 0x42 / 0x44)
encode it as a 7-bit variable length integer: each byte holds seven
value bits, most significant group first, and the high bit of a byte
flags a continuation byte.  The parser read a single byte, so a real
triggered location start request

  09 11 22 03 FF FF EE 52 44 64 42 9C 10 62 57 34 31 84 58

was logged as

  ID:15663103 TRIGGER ON GPIO TRIGGER EVERY:132 SECS REQUESTED TOKENS
  [TIME,REQUEST-64,REQUEST-62,HORIZONTAL DIRECTION,TIMESTAMP,
  UNRECOGNIZED(10,44,58,9C)]

and now decodes to

  ID:FFFFEE PERIODIC INTERVAL:600 SECS PARAM-42:3600 PARAM-44:100
  REQUESTED TOKENS [TIME,HORIZONTAL SPEED,HORIZONTAL DIRECTION]

The encoding and the token names follow node-dmr-lib (LRRP.js
parseLRRPInt/toLRRPInt and its quoted TRBONet captures, DMRConst.js)
and Moto.Net (LRRPPacket.cs "using VLQ for most of the fields").

- Add VarInt, a shared 7-bit varint reader, and VarIntToken, a token
  base class whose byte length is measured from the value and bounded
  by the remaining payload.  Use them for 0x31, 0x78, 0x42 and 0x44.
- Add TokenType.fromRequestValue(): 0x34 is the periodic trigger flag
  in a request and the timestamp in a response.  TokenFactory accepts
  the resolved TokenType so the request path is not re-resolved.
- Rename request tokens: 0x31 TRIGGER_INTERVAL (TriggerInterval),
  0x4A TRIGGER_CONDITION (TriggerCondition: 02 emergency, 42 pin
  status change, 50 PTT, 51 PTT emergency), 0x78 TRIGGER_DISTANCE
  (TriggerDistance), 0x62 HORIZONTAL_SPEED.  0x42 and 0x44 become
  REQUEST_PARAMETER_42/44 (RequestParameter) with an optional varint
  value; their meaning is unknown (observed 3600 and 100).  Remove
  TriggerGpio and TriggerOnMove.
- Identity: assemble the request id big-endian (it was accumulated
  LSB-first), render it in hex, and clamp the read to the message.
- RequestedTokens: keep a list that holds only unrecognized ids; add
  getters for the recognized and unrecognized lists.
- Remove leftover debug locals from LRRPPacket.parseTokens().
- Add LRRPPacketTest (both captured bodies plus two copies with a
  corrupted type byte) and VarIntTest.

Built with the project's Gradle build (JDK 27 toolchain, in Docker);
compileJava, compileTestJava and the 9 new tests pass.

Co-authored-by: csmith_ai <carrottop@gmail.com>
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-11-13 02:33:52 -05:00
Denny Sheirer
07b61be257 #2632 Detect on startup if multiple versions of any library are on the classpath and warn user to cleanup and reinstall (#2633)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-13 01:59:38 -05:00
Steve Pinkham
7fcf035337 edac: correct Golay(24,12) words that are not at the start of the message (#2631)
Golay24.checkAndCorrect indexed the word from bit 0 (getInt(0, 22), xor(12, ...),
flip(index)) and took the parity over the whole message, so it was only right for a
message that is exactly one 24-bit word. P25 TDULC words 2-12 and the DMR voice
superframe words at 24 and 48 were "corrected" in the wrong bits. Decode any other
word in a 24-bit copy and write it back.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-13 01:29:50 -05:00
Steve Pinkham
e7f4f655e5 C4FM: bounds check the start of the buffer in the sync score (#2622)
A lagging sync detect on the first symbol after a buffer reload, followed by a
coarse timing search that steps all the way left, scores a candidate whose first
sync symbol is one sample before the buffer start. score() only checked the end
of the buffer, so it threw ArrayIndexOutOfBoundsException: Index -1.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 03:22:44 -05:00
Denny Sheirer
02c62d012f #2557 DMR improved error detection in voice frames and voice events. (#2608)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-09 03:49:58 -05:00
Denny Sheirer
657cbf5c55 #2600 LimeSDR support (#2601)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-08 06:03:13 -05:00
Denny Sheirer
6cd2cea30b #2588 use jRTL driver library for RTL-SDR tuners and remove legacy custom java driver code (#2590)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-06 15:01:08 -05:00
Denny Sheirer
968705a589 #2569 Support SDRSharp I/Q Baseband Recordings as Recording Tuners and as a user preference for tuner and channel baseband recordings. (#2570)
Co-authored-by: sheirerd <sheirerd@ainfosec.com>
2026-11-03 06:48:20 -05:00
Denny Sheirer
1c097491d9 #2567 Reduces memory overhead by extending the JTransforms FFT package to reuse its float array when calculaing the inverse FFT in the channelizer for a subset of the FFT size operations. (#2568)
Co-authored-by: sheirerd <sheirerd@ainfosec.com>
2026-11-03 05:49:40 -05:00
Denny Sheirer
14c77c4926 TornadoVM experiment (#2564)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-02 03:28:44 -05:00
Denny Sheirer
8aadbe4706 #2301 am decoder enhancements. New squelch control and filter enhancements. (#2556)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 08:55:34 -05:00
Denny Sheirer
19d18b96b3 #2333 Fixes call audio prioritization (#2555)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 07:22:39 -05:00
Denny Sheirer
59e64a73ff #2338 Resolves P25P1MessageAssembler full - can't add additional dibit (#2554)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 07:09:43 -05:00
Denny Sheirer
8b338dec2d #2373 DMR stale talker alias (#2553)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 06:47:22 -05:00
Denny Sheirer
9359f523c1 #2421 Motorola talker alias with Cyrillic now decodes correctly (#2551)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 06:20:47 -05:00
Denny Sheirer
e385d2fdec #2438 resolves broadcaster error that happens during tuner source swapout (#2550)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 06:04:57 -05:00
Denny Sheirer
7b249af944 #2496 Displays use complementary color for aliases in dark mode (#2548)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 05:38:48 -05:00
Denny Sheirer
197cec04f3 #2529 NXDN adds aliasing support for Type-D identifiers and fixes issue in certain NXDN messaing where the TO identifiers are incorrectly tagged. (#2547)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 05:21:28 -05:00
Denny Sheirer
866aadc8c3 ##2544 bladeRF supports up to 122 MHz sample rate. Adds new 2048 and 4096 half band decimation filters. (#2545)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-11-01 04:24:22 -05:00
Denny Sheirer
276f4a316a #2542 bladeRF SDR tuner support (#2543)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-10-31 08:24:45 -04:00
Denny Sheirer
85bfd21257 2537 Complex Vector Oscillator (256/512) Lanes Can Drift Apart Over Time (#2538)
* #2535 Heterodyne Channelizer enhancements and corrections.

* #2537 Complex vector oscillator SIMD lane drift.

Realigns the SIMD lanes every 262,144 samples. At frequencies where the
rotation for a set of lanes is nearly a whole or half turn, rounding affects
each lane differently and the lanes drift apart until the next frequency
change, producing spurs at multiples of the sample rate divided by the lane
count.  Lane phase error at 3125 Hz with a 50 kHz sample rate was about -38 dBc
after one hour and is now about -83 dBc with 16 lanes and -73 dBc with 8 lanes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* #2537 test updates

* #2537 test updates

---------

Co-authored-by: denny <dennis.sheirer@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 08:42:49 -04:00
Denny Sheirer
9ebbf957a2 #2533 Polyphase channelizer enhancements for correctness and efficiency. (#2534)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-10-30 06:47:50 -04:00
Denny Sheirer
248fe3e4f7 #2526 Polyphase Channelizer gain imbalance across synthesis of two adjacent channels. (#2527)
- Fix two-channel synthesis asymmetry across polyphase channel boundaries.
- TwoChannelSynthesizerM2: replace incorrect 2-path polyphase split (which applied
  different responses to each channel) with channel sum + prototype filter
  modulated to the channel boundary (+FS/4).
- ComplexPolyphaseChannelizerM2: start on the middle block map when taps per
  channel is odd so adjacent channel outputs are phase coherent.
- TwoChannelOutputProcessor: translate channel 2 by FS/2 using the absolute
  block index parity derived from the even-sized dispatch batches.
- SynthesizerViewer: translate channel 2 before synthesis.
- Add TwoChannelSynthesizerM2Test for flat, symmetric boundary response.

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-10-29 08:51:37 -04:00
Denny Sheirer
9a6dc2b0a0 #2524 P25P2 Decoder enhancements (#2525)
* Adopts same architecture and symbol processor as P1 C4FM/LSM, DMR and NXDN.
* Soft symbol sync detection, processing and erro correction.
* Scalar and vector soft sync detection and calibration
* Improved time slot detection/prediction and ISCH processing.
* Fixes bug in parsing sequential mac structures in SACCH
* Vector calibration(s) cleanup across multiple calibrations
* Error correction bug in ISCH
* Renames differential demod shared with P1 LSM decoder.

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-10-29 07:32:17 -04:00
Denny Sheirer
6b9cd2d317 #2518 P25P1 LSM Decoder enhancements. (#2523)
* Uses same shared architecture and symbol processor pattern as other C4FM decoders.
* Adds soft symbol processing and sync detection.
* Removes RRC filter and replaces with improved channel filter.
* Viterbi soft symbol decoding with demodulator reliability weighting
* Improved sync reacquisition in low SNR
* Improved handling for phase wrapping and interpolation
* NAC Tracker updated to track by NAC count
* Native buffers returning partial buffers
* Message processor uses only valid LDU1 words
* Reduced phantom TDU messages
* Tuner/Channe frequency error corrections don't reset the symbol trackers and fix possible divide by zero error
* LSM timing error detector now updates per symbol block size instead of sample buffer size - faster convergence
* New unit tests
* Resolves several issues, including a lagging sync detect offset issue in the recently updated P25P1 C4FM decoder.
* Consolidate filter designers for each protocol back into the FilterFactory class.
* DMR, P25 Phase 1 C4FM and LSM, and P25 Phase 2 decoders design the baseband filter once and share the taps across the I and Q filters.

Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-10-29 04:17:47 -04:00
Denny Sheirer
f2c98cdb40 #2516 DMR Decoder enhancements. Architecture now shares common C4FM framework like P25P1 and NXDN. Adds soft decoding and enhanced/corrected error detection and correction. (#2517)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2026-10-26 06:34:57 -04:00
John Stockdale
2292af6c07 #2428 Polyphase Channelizer efficiency enhancements
Closes #2428 

Fuse polyphase channelizer multiply-accumulate and reuse scratch accumulator to reduce per-block allocation (#2429)
2026-07-12 07:38:20 -04:00
Denny Sheirer
7945f0ce63 #7 NXDN Decoder support. Redesigns tuner and channel frequency error management. (#2431)
Closes #7 

NXDN Decoder

* Implements: NXDN4800, NXDN9600, Type-C and Type-D decoding and trunk tracking.
* Redesigns tuner and channel frequency error management.
2026-07-08 03:44:08 -04:00
Denny Sheirer
15b7923a4f #2226 DMR Decoder adds an equalizer to adjust symbol constellation balance/skew and gain to optimize symbol quadrant alignment/mapping. Reduces sync detectors from 3 to 2 and sets minimum objective channel sample rate to 19.2 kHz. (#2245)
Co-authored-by: denny <dennis.sheirer@gmail.com>
2025-06-24 04:38:10 -04:00