From 1ec7278ab192e58ce0515c62bf1ff6930377daf8 Mon Sep 17 00:00:00 2001
From: Denny Sheirer <dennissheirer2002@yahoo.com>
Date: Mon, 5 Oct 2015 18:58:13 -0400
Subject: [PATCH] Created Getting Started (markdown)

---
 Getting-Started.md | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Getting-Started.md

diff --git a/Getting-Started.md b/Getting-Started.md
new file mode 100644
index 0000000..febca0c
--- /dev/null
+++ b/Getting-Started.md
@@ -0,0 +1,37 @@
+## Getting started with SDRTRunk ##
+
+### Setup ###
+
+  * **[Linux](SetupLinux)**
+  * **[Windows](SetupWindows)**
+
+![http://sdrtrunk.googlecode.com/svn/wiki/images/Overview.png](http://sdrtrunk.googlecode.com/svn/wiki/images/Overview.png)
+
+[Application Overview](ApplicationOverview.md)
+
+### Quick Start - SDR Dongle ###
+
+1. Select a tuner to display in the spectral display
+
+2. Tune to a frequency near the channel that you want to decode.  Do not tune
+the channel into the center of the display.  Adjust the frequency so that the
+channel is either to the left or to the right of the center of the display.
+
+3. Right-click on the frequency in the spectral display, choose **Add Decoder**
+select the type of decoder that you want to use.
+
+4. If a tuner is available, the channel will immediately start decoding with
+default settings. Select the channel in the **Decoding Channels** window to see
+call events and decoded messages.
+
+### Quick Start - Sound Card / Scanner Audio ###
+
+1.  Create a new [channel](Channel)
+
+2.  In the channel editor select the correct **Mixer** and **Channel** in the source tab, corresponding to where you have patched your scanner audio into the computer.
+
+3.  Select **Enabled**
+
+4.  Hit **Save**.
+
+5.  Select the channel in the [decoding channels](DecodingChannels.md) window to hear the pass-through audio.
\ No newline at end of file