From 467950dbc986b78ad6f9a80bdf4a4b78f12e1d5d Mon Sep 17 00:00:00 2001 From: Denny Sheirer Date: Sun, 3 Aug 2025 06:48:34 -0400 Subject: [PATCH] Updated Playlist Editor (markdown) --- Playlist-Editor.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Playlist-Editor.md b/Playlist-Editor.md index d73f59e..2bc28a9 100644 --- a/Playlist-Editor.md +++ b/Playlist-Editor.md @@ -932,7 +932,7 @@ The noise squelch view contains the following controls: * Close Squelch: the audio squelch will close and mute audio once the noise level drops below the noise close threshold for a combined period of time that is longer than the hysteresis close threshold. #### Adjusting: -Visually observe the actual noise level when the channel is active to gain an understanding of the channel. Observe the average noise level when the signal is present and the highest peaks of the noise level when no signal is present. +Visually observe the actual noise level when the channel is active to gain an understanding of the channel. Observe the average noise level when the signal is present and the highest peaks of the fluctuating/random noise level when no signal is present. If the squelch is not opening when a signal is present, you can reduce the open noise threshold to a lower level between the no-signal noise level and the active signal noise level. However, reducing this value will cause the squelch to open more quickly for both noise bursts and real signal. Adjust the close noise threshold value equal to the open threshold. If the squelch is randomly closing during transmissions and causing audio fragmentation, you can reduce the close noise threshold to a point where it aligns with the peaks of the random noise levels, when no signal is present, so the squelch stays open across the full transmission.