Updated APCO25_V0.3.0 (markdown)

Denny Sheirer
2019-11-24 06:05:07 -05:00
parent 11d98b176a
commit 4717aa3cee

@@ -10,26 +10,25 @@ Decodes FDMA Common Air Interface (CAI) C4FM modulation and Linear Simulcast
Modulation (LSM). Modulation (LSM).
## P-25 Phase II ## P-25 Phase II
Phase II TDMA decoding is not currently supported. Phase II TDMA (2 timeslot) traffic channel decoding.
## P-25 Hybrid (Phase I/II) ## P-25 Phase I/II
P25 hybrid systems use both Phase 1 control channels and Phase I and Phase II P25 Phase II systems use both a Phase 1 control channel and Phase I and Phase II
traffic channels, providing transition support for users with a combination of traffic channels, providing transition support for users with a combination of
Phase I and Phase II radios. Phase I and Phase II radios.
TDMA configuration messages that are broadcast on Phase I control channels are
decoded. Currently these include the TDMA timing synchronization and TDMA
channel identifier messages.
## Audio Vocoders ## Audio Vocoders
### IMBE ### ### IMBE ###
APCO-25 Phase I audio calls use the multi-band excitation model vocoder to APCO-25 Phase I audio calls use the IMBE vocoder for digital audio.
compress the digitized audio. SDRTrunk supports the JMBE library for decoding
### AMBE ###
APCO-25 Phase II audio calls use the AMBE vocoder for digital audio.
SDRTrunk supports the JMBE library for decoding both IMBE and AMBE digital
audio, but DOES NOT include the jmbe library in the normal application download. audio, but DOES NOT include the jmbe library in the normal application download.
You must download and compile the library and place the jmbe-x.x.x.jar file in You must download and compile the library and use the **View >> Preferences** menu
the same directory from where you launch the sdrtrunk application. On startup, to specify the location of the compiled JMBE library (jmbe-x.x.x.jar).
sdrtrunk will attempt to discover the library and can then decode imbe audio.
[JMBE library](https://github.com/DSheirer/jmbe) [JMBE library](https://github.com/DSheirer/jmbe)
@@ -46,9 +45,11 @@ decoder configuration when setting up the channel for decoding.
## Talkgroups and Addresses ## ## Talkgroups and Addresses ##
All talkgroups and radio addresses are listed in hexadecimal (base-16) notation All talkgroups and radio addresses are presented in decimal or hexadecimal
and use the digits 0 - 9 and the letters A - F. Talkgroups are four characters (base-16) notation (see Preferences).
in length and radio addresses are six characters in length.
### **Talkgroups**: 1 - 65,535
### **Individual Radio Identifiers**: 65,636 - 16,777,211
Packet data IP Version 4 addresses will normally show in the from column of the Packet data IP Version 4 addresses will normally show in the from column of the
events window and the Logical Link ID (radio address) will show in the from events window and the Logical Link ID (radio address) will show in the from
@@ -61,18 +62,17 @@ will be appended to the IP address.
You can create an Alias List and attach it to your P25 decoder in the channel You can create an Alias List and attach it to your P25 decoder in the channel
configuration window. configuration window.
When aliasing talkgroups and radio addresses, ensure you include the full 4 or 6 When aliasing talkgroups and radio addresses, you can use either a single talkgroup decimal value, or you can enter a range of talkgroup decimal values.
character talkgroup or address with leading zeros.
Add these trunking system unit ID values to your alias list: Optionally, add these trunking system unit ID values to your alias list:
**FFFFFD** = (Trunking) System Controller. 16,777,212 = (Trunking) System Controller.
**FFFFFE** = Registration Controller 16,777,213 = Registration Controller
**FFFFFF** = All Call 16,777,215 = All Call
## Modulation ## ## Modulation ##
Choose either C4FM or LSM Simulcast (CQPSK) modulation in the channel configuration Choose either C4FM or LSM Simulcast (CQPSK) modulation for Phase 1 channels in the channel configuration
decoder tab. When you select the P25 Decoder from the drop-down list, the decoder tab. When you select the P25 Decoder from the drop-down list, the
modulation selector list will appear. modulation selector list will appear.
@@ -88,7 +88,12 @@ traffic channel frequencies used by the system because the control channel will
tell the sdrtrunk application every thing that it needs to know in order to tell the sdrtrunk application every thing that it needs to know in order to
setup a temporary decoding channel. setup a temporary decoding channel.
### Traffic Channel Pool ### **Note**: Phase 2 capable trunked systems will use a Phase 1 control channel
with Phase 2 traffic channels. You only have to setup one channel configuation
for the Phase 1 control channel. The Phase 2 traffic channels will be
automatically created by sdrtrunk as each call occurs.
### Traffic Channel Pool Size ###
When configuring the P25 control channel decode configuration, use the Traffic When configuring the P25 control channel decode configuration, use the Traffic
Channel Pool setting to set the maximum number of temporary traffic channels Channel Pool setting to set the maximum number of temporary traffic channels
@@ -97,10 +102,13 @@ channel configurations up to this maximum number and reuse the channel
configurations for subsequent calls. configurations for subsequent calls.
The default value of 4 traffic channels in the pool is suitable for a modern The default value of 4 traffic channels in the pool is suitable for a modern
powerful processor. You may have to reduce this pool size if you are using a powerful processor. You can increase this value to match the number of traffic
lower powered CPU. Monitor the computer's CPU and memory consumption and adjust channel frequencies for the system your are monitoring, provided your computer
this value as needed. Note: you'll have to stop and restart the decoding after is capable of running that many channels at the same time. You may have to reduce
you change the traffic channel pool size value and save it. this pool size if you are using a lower powered CPU. Monitor the computer's CPU
and memory consumption and adjust this value as needed. Note: you'll have to
stop and restart the decoding after you change the traffic channel pool size
value and save it.
## P25 Decoding Example ## ## P25 Decoding Example ##