Update to channels wiki page

Denny
2017-02-24 08:01:51 -05:00
parent f48ea82a31
commit d4880599e3

@@ -4,13 +4,13 @@ Channels
--- ---
Channels are configurations that you create for each radio frequency channel that Channels are configurations that you create for each radio frequency channel that
you want to monitor. The channel configuration contains the basic information you want to monitor. The channel configuration contains the basic information
needed to tune to a radio channel frequency, attach one ore more protocol-specific needed to tune to a radio channel frequency, attach one or more protocol-specific
decoders, specify an alias list, and setup logging and recording options. decoders, specify an alias list, and setup logging and recording options.
You can create channel configurations for all radio channels that you might want to **TIP:** Create channel configurations for all radio channels that you might want to
monitor. Click the **Enable** button in the channel configuration editor to start monitor. Click the **Enable** button in the channel configuration editor to start
a channel decoding. If you shut down the application and restart it later, all of a channel decoding. If you shut down the application and restart it later, any
the channels that were enabled will automatically start again. channels that were enabled will automatically start again.
![Figure 1: Channels Table - Name/Alias Editor](images/ChannelsNameEditor.png) ![Figure 1: Channels Table - Name/Alias Editor](images/ChannelsNameEditor.png)
**Figure 1:** Channels Table - Name/Alias Editor **Figure 1:** Channels Table - Name/Alias Editor
@@ -22,9 +22,10 @@ Viewing, Sorting, and Filtering Channels
--- ---
#### Sorting #### Sorting
Click the column name to apply alphabetical sorting. An arrow appears to the right Click the column name in the channels table to apply alphabetical sorting. An
of the column name to indicate if the list is sorted ascending or descending. By arrow appears to the right of the column name to indicate if the list is sorted
clicking the column name you can toggle the ascending or descending order. ascending or descending. By clicking the column name you can toggle the ascending
or descending order.
#### Filtering #### Filtering
Each of the columns in the channels table contain a column heading with a drop-down Each of the columns in the channels table contain a column heading with a drop-down
@@ -88,16 +89,16 @@ The following are settings that can be modified in the **Name/Alias** section ta
of the channel editor. The **Name/Alias** editor is shown in Figure 1. of the channel editor. The **Name/Alias** editor is shown in Figure 1.
#### Name #### Name
The channel name is the textual value that you specify. This value does not The channel name is a textual value that you specify. This value does not
affect decoding. affect decoding.
#### Alias List #### Alias List
Choose an alias list name from the drop-down list, or type a new alias list name. Choose an alias list name from the drop-down list, or type a new alias list name.
The values in the list are pulled from the set of [Aliases](Aliases.md) that you The values in the list are pulled from any [Aliases](wiki/Aliases.md) that you may
already created. have already created.
If you type a new alias list name for your channel configuration, be sure to use If you type a new alias list name for your channel configuration, be sure to use
that alias list name for any aliases that you create in the [Aliases](Aliases.md) that alias list name for any aliases that you create in the [Aliases](wiki/Aliases.md)
table. When you start your channel decoding, any aliases with the matching alias table. When you start your channel decoding, any aliases with the matching alias
list name will be assembled into an alias list for use with the channel. If you list name will be assembled into an alias list for use with the channel. If you
add new aliases while your channel is currently decoding, they will be automatically add new aliases while your channel is currently decoding, they will be automatically
@@ -149,7 +150,7 @@ channel configuration. The **Decoder Editor** is shown in Figure 3. The applic
allows you to specify exactly one primary decoder and one or more auxiliary allows you to specify exactly one primary decoder and one or more auxiliary
decoders. See below for details on auxiliary decoders. decoders. See below for details on auxiliary decoders.
Refer to the [Decoders](Decoders.md) page for details and configuration for each Refer to the [Decoders](wiki/Decoders.md) page for details and configuration for each
primary decoder type. primary decoder type.
![Figure 4: Channels Table - Aux Decoders Editor](images/ChannelsAuxDecoderEditor.png) ![Figure 4: Channels Table - Aux Decoders Editor](images/ChannelsAuxDecoderEditor.png)
@@ -164,7 +165,7 @@ signalling that may be included in certain radio systems. These in-band
signalling types are normally used for radio identification or data/GPS signalling types are normally used for radio identification or data/GPS
transmissions in older analog radio systems. transmissions in older analog radio systems.
Refer to the [Decoders](Decoders.md) page for details and configuration for each Refer to the [Decoders](wiki/Decoders.md) page for details and configuration for each
auxiliary decoder type. auxiliary decoder type.
![Figure 5: Channels Table - Logging Editor](images/ChannelsLoggingEditor.png) ![Figure 5: Channels Table - Logging Editor](images/ChannelsLoggingEditor.png)