Fix Compiler Error on RTL Dev Enum;

Sending Audio to a Icecast 2 Server via FFmpeg (Windows)

.gitignore

@@ -7,3 +7,4 @@ build
 examples
 *.bin
 *.ans
+*.patch

CMakeLists.txt

@@ -31,12 +31,6 @@ if (PVC)
     add_definitions(-DPVCONVENTIONAL) 
 endif ()
 
-#use cmake option -DNXDN=ON to enable the old NXDN Sync Pattern
-option(NXDN
-    "Build with Old NXDN Sync Pattern Enabled" OFF)
-if (NXDN)
-    add_definitions(-DNXDNOLDSYNC) 
-endif ()
 
 #use cmake option -DLZ=ON to enable LimaZulu Requested NXDN Tweaks
 option(LZ
@@ -52,13 +46,6 @@ if (TN)
     add_definitions(-DTONES) 
 endif ()
 
-#use cmake option -DZDEV to change designation of this build from MAIN to zDEV
-option(ZDEV
-    "change designation of this build from MAIN to zDEV" OFF)
-if (ZDEV)
-    add_definitions(-DZDEV_BUILD) 
-endif ()
-
 include(git_revision)
 git_describe(GIT_TAG)
 

download-and-install-Arch.sh

@@ -0,0 +1,67 @@
+#! /bin/bash
+clear
+echo DSD-FME Digital Speech Decoder - Florida Man Edition Auto Installer For Arch Linux
+echo This will install the required packages, clone, build, and install DSD-FME only.
+echo This has been tested on Arch 2023.08.01 and Manjaro XFCE 22.1.3 Minimal.
+echo 
+echo MBELib is considered a requirement on this build.
+echo You must view this notice prior to continuing. 
+echo The Patent Notice can be found at the site below.
+echo https://github.com/lwvmobile/mbelib#readme
+echo Please confirm that you have viewed the patent notice by entering y below.
+echo
+echo y/N
+read ANSWER
+Y='y'
+if [[ $Y == $ANSWER ]]; then
+
+sudo pacman -Syu #always run a full update first, partial upgrades aren't supported in Arch -- including downloading dependencies, that may require an updated dependency, and breaks same dependency on another package, a.k.a, dependency hell
+sudo pacman -S libpulse cmake ncurses lapack perl fftw rtl-sdr codec2 base-devel libsndfile git wget
+
+echo Installing itpp 4.3.1 from Arch Strike --Tested on Arch 2023.08.01 and Manjaro XFCE 22.1.3 Minimal
+wget https://mirror.archstrike.org/x86_64/archstrike/itpp-4.3.1-3-x86_64.pkg.tar.xz
+sudo pacman -U itpp-4.3.1-3-x86_64.pkg.tar.xz
+sudo rm -R itpp-4.3.1-3-x86_64.pkg.tar.xz
+
+git clone https://github.com/lwvmobile/mbelib
+cd mbelib
+git checkout ambe_tones
+mkdir build
+cd build
+cmake ..
+make -j `nproc`
+sudo make install
+sudo ldconfig
+#sudo cp /usr/local/lib/libmbe.a /usr/lib/libmbe.a
+sudo cp /usr/local/lib/libmbe.so /usr/lib/libmbe.so #this is the only one we need to copy 
+#sudo cp /usr/local/lib/libmbe.so.1 /usr/lib/libmbe.so.1
+#sudo cp /usr/local/lib/libmbe.so.1.3 /usr/lib/libmbe.so.1.3
+cd ..
+cd ..
+
+git clone https://github.com/lwvmobile/dsd-fme
+### For branch v2.1b - git clone --branch v2.1b https://github.com/lwvmobile/dsd-fme
+cd dsd-fme
+git checkout v2.1b
+sudo cp tone8.wav /usr/share/
+sudo cp tone24.wav /usr/share/
+sudo cp tone48.wav /usr/share/
+sudo chmod 777 /usr/share/tone8.wav
+sudo chmod 777 /usr/share/tone24.wav
+sudo chmod 777 /usr/share/tone48.wav
+mkdir build
+cd build
+cmake ..
+make -j `nproc`
+sudo make install
+sudo ldconfig
+sudo rm -R dsd-fme
+
+echo Any issues, Please report to either
+echo https://github.com/lwvmobile/dsd-fme/issues
+echo https://forums.radioreference.com/threads/dsd-fme.438137/
+
+else
+echo
+echo Sorry, you cannot build DSD-FME without acknowledging the Patent Notice.
+fi

examples/Example_Usage.md

@@ -100,7 +100,7 @@ and in a second terminal tab, same folder, run
 
 EDACS Trunking (w/ channel map import)
 
---EDACS/PV Trunking using RIGCTL and TCP Direct Link Audio inside of SDR++ (Tested and Working on EDACS/EDACS-EA with Provoice only, no analog voice monitoring)
+--EDACS/PV Trunking using RIGCTL and TCP Direct Link Audio inside of SDR++ (Tested and Working on EDACS/EDACS-EA with Provoice, Analog Voice Monitoring and Per Call is Experimental)
 
 `dsd-fme -i tcp -fp -C channel_map.csv -G group.csv -T -U 4532 -N 2> log.ans`
 
@@ -134,14 +134,16 @@ Trunking Note1: All samples above can also be run with the RTL input method and
 
 Trunking Note2: QPSK Phase 1 and Phase 2 Systems may be subceptible to LSM distortion issues, but seem to do okay, but require really good signal. Some CRC issues still occur with Phase 2 TDMA LCCH Mac Signal that can affect reliability, I believe this issue is ultimately caused by the PSK demodulation inside of FME. I also don't believe this will work on 8-level PSK, but I cannot determine that at the moment. Update: I have improved the LCCH Mac Signal decoding my increasing the QPSK decision point buffers to their maximum values. 
 
-Trunking Note3: DMR Trunking has been coded, and some testing and tweaks have been carried out. Cap+, Con+, and TIII systems seem to do well with trunking now. Placing the frequency for the control channel at channel map 0 in your channel_map.csv file is not required now if using RIGCTL or the RTL Input, both can poll the VFO for the current frequency if it believes its on a control channel, but setting a fake channel number (i.e. 999) first with the CC frequency will result in finding the CC faster on startup if desired. If you need to map out your channels for TIII, you can observe the console output and look for channel numbers. For conveniece I have included the DSDPlus channel numbering (as best as I can figure it, but they seem consistent) into the console print so it will make it easier for users from DSDPlus to map frequencies into the channel_map.csv file. Make sure your channel numbers are the Cd (channel decimal) values from the log, and not the C+ (dsdplus) values. Notice: TIII Site ID value needs work to determine proper DMRLA values for system area and sub area.
+Trunking Note3: DMR Trunking has been coded, and some testing and tweaks have been carried out. Cap+, Con+, and TIII systems seem to do well with trunking now. Placing the frequency for the control channel at channel map 0 in your channel_map.csv file is not required now if using RIGCTL or the RTL Input, both can poll the VFO for the current frequency if it believes its on a control channel, but setting a fake channel number (i.e. 999) first with the CC frequency will result in finding the CC faster on startup if desired. If you need to map out your channels for TIII, you can observe the console output and look for channel numbers. For conveniece I have included the DSDPlus style LSN-esque numbering into the console print so it will make it easier for users from DSDPlus to map frequencies into the channel_map.csv file. Make sure your channel numbers are the lpcn (12-bit logical physical channel number - decimal format) values from the log, and not the LPCN+TS (13-bit DSDPlus LSN) values. Notice: TIII Site ID value needs work to determine proper DMRLA values for system area and sub area.
 
 ```
+00:43:00 Sync: +DMR  [slot1]  slot2  | Color Code=00 | CSBK
  Talkgroup Voice Channel Grant (TV_GRANT) - Logical
-  Ch [036] Cd [0054] C+ [0110] - TS [1] - Target [01900500] - Source [01900505]
+  LPCN: 0075; TS: 2; LPCN+TS: 0152; Target: 16518173 - Source: 16533625
+
 ```
 
-Use channel 54 in your import file, which would correspond to dsdplus channels 109 and 110 (109 = TS0 / 110 = TS1).
+Use channel 75 in your import file, which would correspond to dsdplus channels 151 and 152 (151 = TS1 / 152 = TS2).
 
 For Connect Plus, enumerate your list from 1 to the last channel and add the frequency. For Capacity Plus, LSN 1 and 2 will share the same frequency, 3 and 4 will share, 5 and 6 will share, and 7-8 will share, as Capacity Plus counts each 'channel' as two seperate channels (LSN), one for each time slot. Capacity Plus Quirk: DSD-FME makes its best effort to follow the rest channel in the event that the sync is lost for longer than the hangtime, but occassionally, DSD-FME may lose the rest channel and will have to hunt through all frequencies to find it again.
 
@@ -191,4 +193,35 @@ e - Toggle Trunking Tuning to Encrypted Calls (P25)
 9 - Connect to SDR++ RIGCTL Server with Defaults/Retry RIGCTL Connection
 D - Reset DMR Site Parms/Call Strings, etc.
 Z - Simulate NoCarrier/No VC/CC sync (capital Z)
-```
+```
+
+## Sending Audio to a Icecast 2 Server via FFmpeg (Windows)
+
+Make sure to enable "Stereo Mix" from Volume Control Panel and then disable Windows Sounds.
+
+`ffmpeg -f dshow -i audio="Stereo Mix (Realtek High Definition Audio)" -c:a aac -b:a 64k -content_type 'audio/aac' -vn -f adts icecast://source:password@192.168.5.251:8844/DSDFME`
+
+## Sending Audio to a Icecast 2 Server via FFmpeg (Linux w/ Pulse Audio)
+
+`pactl list short sources`
+
+Choose Desired Device to Cast:
+
+```
+0 auto_null.monitor       module-null-sink.c      s16le 2ch 48000Hz       IDLE
+1	alsa_output.pci-0000_0d_00.3.analog-stereo.monitor	module-alsa-card.c	s16le 2ch 44100Hz	RUNNING
+2	alsa_input.pci-0000_0d_00.3.analog-stereo	module-alsa-card.c	s16le 2ch 44100Hz	RUNNING
+3	virtual_sink.monitor	module-null-sink.c	s16le 2ch 44100Hz	RUNNING
+4	virtual_sink2.monitor	module-null-sink.c	s16le 2ch 44100Hz	RUNNING
+7	alsa_output.pci-0000_0b_00.1.hdmi-stereo-extra1.monitor	module-alsa-card.c	s16le 2ch 44100Hz	RUNNING
+```
+
+Example: 
+
+```
+francis@12cores:~$ pactl list short sources
+0       auto_null.monitor       module-null-sink.c      s16le 2ch 48000Hz       IDLE
+francis@12coresx:~$ ffmpeg -f pulse -i 0 -c:a libmp3lame -ab 64k -f mp3 icecast://source:password@XXXXXXXXX:8000
+
+
+```

examples/Install_Notes.md

@@ -11,8 +11,18 @@ wget https://raw.githubusercontent.com/lwvmobile/dsd-fme/main/download-and-insta
 chmod +x download-and-install.sh
 ./download-and-install.sh
 ```
-f
-If you have dependencies already installed (i.e. need a fresh clean install on a system with DSD-FME already or using system other than Debian/Ubuntu, etc), please run this instead:
+
+### Arch Based Distros:
+
+```
+wget https://raw.githubusercontent.com/lwvmobile/dsd-fme/v2.1b/download-and-install-Arch.sh
+chmod +x download-and-install-Arch.sh
+./download-and-install-Arch.sh
+```
+
+### Other:
+
+If you have dependencies already installed, please run this instead:
 
 ```
 wget https://raw.githubusercontent.com/lwvmobile/dsd-fme/main/download-and-install-nodeps.sh
@@ -31,11 +41,22 @@ sudo apt update
 sudo apt install libpulse-dev pavucontrol libsndfile1-dev libfftw3-dev liblapack-dev socat libusb-1.0-0-dev libncurses5 libncurses5-dev rtl-sdr librtlsdr-dev libusb-1.0-0-dev cmake git wget make build-essential libitpp-dev libncursesw5-dev libcodec2-dev
 ```
 
-Fedora (Recent Releases) -- from https://github.com/lwvmobile/dsd-fme/issues/99
+Fedora 36/37 -- from https://github.com/lwvmobile/dsd-fme/issues/99
 
 ```
+sudo dnf update
 sudo dnf install libsndfile-devel fftw-devel lapack-devel rtl-sdr-devel pulseaudio-libs-devel libusb-devel cmake git ncurses ncurses-devel gcc wget pavucontrol gcc-c++ codec2-devel
 ```
+
+Arch -- https://github.com/lwvmobile/dsd-fme/issues/153 and https://github.com/lwvmobile/dsd-fme/issues/153
+
+```
+sudo pacman -Syu
+sudo pacman -S libpulse cmake ncurses lapack perl fftw rtl-sdr codec2 base-devel libsndfile git wget rtl-sdr
+wget https://mirror.archstrike.org/x86_64/archstrike/itpp-4.3.1-3-x86_64.pkg.tar.xz
+sudo pacman -U itpp-4.3.1-3-x86_64.pkg.tar.xz
+```
+
 ## Headless Ubuntu Server/Pi
 
 If running headless, swap out pavucontrol for pulsemixer, and also install pulseaudio as well. Attempting to install pavucontrol in a headless environment may attempt to install a minimal desktop environment. Note: Default behavior of pulseaudio in a headless environment may be to be muted, so check by opening pulsemixer and unmuting and routing audio appropriately.

include/dsd.h

@@ -274,7 +274,7 @@ typedef struct
   int rtl_udp_port;
   int rtl_bandwidth;
   int rtl_started;
-  int rtl_rms;
+  long int rtl_rms;
   int monitor_input_audio;
   int pulse_raw_rate_in;
   int pulse_raw_rate_out;
@@ -414,6 +414,10 @@ typedef struct
   float *audio_out_temp_buf_p;
   float audio_out_temp_bufR[160];
   float *audio_out_temp_buf_pR;
+  //analog/raw signal audio buffers
+  short analog_out[960];
+  int analog_sample_counter;
+  //
   int audio_out_idx;
   int audio_out_idx2;
   int audio_out_idxR;
@@ -652,6 +656,7 @@ typedef struct
   int dmr_vc_lcn;
   int dmr_vc_lsn;
   int dmr_tuned_lcn;
+  uint16_t dmr_cc_lpcn; //dmr t3 logical physical channel number
 
   //edacs
   int ea_mode;
@@ -733,6 +738,7 @@ typedef struct
 
   unsigned long long int m17_dst;
   unsigned long long int m17_src;
+  uint8_t m17_can;
 
   char m17_dst_csd[20];
   char m17_src_csd[20];
@@ -740,7 +746,7 @@ typedef struct
   char m17_src_str[50];
   char m17_dst_str[50];
 
-  uint8_t m17_meta[14]; //packed meta
+  uint8_t m17_meta[16]; //packed meta
   uint8_t m17_enc;      //enc type
   uint8_t m17_enc_st;   //scrambler or data subtye
 
@@ -819,6 +825,10 @@ typedef struct
 #define INV_PROVOICE_EA_SYNC "13313133113113333311313133133311"
 #define PROVOICE_EA_SYNC     "31131311331331111133131311311133"
 
+//EDACS/PV EOT dotting sequence
+#define DOTTING_SEQUENCE_A  "131313131313131313131313131313131313131313131313" //0xAAAA...
+#define DOTTING_SEQUENCE_B  "313131313131313131313131313131313131313131313131" //0x5555...
+
 //define the provoice conventional string pattern to default 85/85 if not enabled, else mute it so we won't double sync on accident in frame_sync
 #ifdef PVCONVENTIONAL
 #define PROVOICE_CONV        "00000000000000000000000000000000" //all zeroes should be unobtainable string in the frame_sync synctests
@@ -827,7 +837,7 @@ typedef struct
 #define PROVOICE_CONV        "13131333111311311313131313131313" //TX 85 RX 85 (default programming value)
 #define INV_PROVOICE_CONV    "31313111333133133131313131313131" //TX 85 RX 85 (default programming value)
 #endif
-//we use the short sync instead of the default 85/85 wnen PVCONVENTIONAL is defined by cmake
+//we use the short sync instead of the default 85/85 when PVCONVENTIONAL is defined by cmake
 #define PROVOICE_CONV_SHORT                 "1313133311131131" //16-bit short pattern, last 16-bits change based on TX an RX values
 #define INV_PROVOICE_CONV_SHORT             "3131311133313313"
 //In this pattern (inverted polarity, the norm for PV) 3 is bit 0, and 1 is bit 1 (2 level GFSK)
@@ -873,6 +883,7 @@ void openAudioInDevice (dsd_opts * opts);
 
 int getDibit (dsd_opts * opts, dsd_state * state);
 int get_dibit_and_analog_signal (dsd_opts * opts, dsd_state * state, int * out_analog_signal);
+int digitize (dsd_opts* opts, dsd_state* state, int symbol);
 
 void skipDibit (dsd_opts * opts, dsd_state * state, int count);
 void saveImbe4400Data (dsd_opts * opts, dsd_state * state, char *imbe_d);
@@ -944,7 +955,6 @@ short nxdn_filter(short sample);
 short dpmr_filter(short sample);
 short m17_filter(short sample);
 
-int strncmperr(const char *s1, const char *s2, size_t size, int MaxErr);
 uint64_t ConvertBitIntoBytes(uint8_t * BufferIn, uint32_t BitLength);
 
 void ncursesOpen (dsd_opts * opts, dsd_state * state);
@@ -1037,6 +1047,9 @@ void dmr_flco (dsd_opts * opts, dsd_state * state, uint8_t lc_bits[], uint32_t C
 void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8_t cs_pdu[], uint32_t CRCCorrect, uint32_t IrrecoverableErrors);
 void dmr_slco (dsd_opts * opts, dsd_state * state, uint8_t slco_bits[]);
 uint8_t dmr_cach (dsd_opts * opts, dsd_state * state, uint8_t cach_bits[25]);
+uint32_t dmr_34(uint8_t * input, uint8_t treturn[18]); //simplier trellis decoder
+void beeper (dsd_opts * opts, dsd_state * state, int type); //the tone beeper function
+void dmr_gateway_identifier (uint32_t source, uint32_t target); //translate special addresses
 
 //Embedded Alias and GPS
 void dmr_embedded_alias_header (dsd_opts * opts, dsd_state * state, uint8_t lc_bits[]);
@@ -1073,7 +1086,8 @@ uint8_t crc8(uint8_t bits[], unsigned int len);
 bool crc8_ok(uint8_t bits[], unsigned int len);
 //modified CRC functions for SB/RC
 uint8_t crc7(uint8_t bits[], unsigned int len);
-uint8_t crc3(uint8_t bits[], unsigned int len); 
+uint8_t crc3(uint8_t bits[], unsigned int len);
+uint8_t crc4(uint8_t bits[], unsigned int len); 
 
 //LFSR and LFSRP code courtesy of https://github.com/mattames/LFSR/
 void LFSR(dsd_state * state);
@@ -1160,7 +1174,8 @@ int UDPBind (char *hostname, int portno);
 
 //EDACS
 void edacs(dsd_opts * opts, dsd_state * state);
-unsigned long long int edacs_bch (unsigned long long int message); 
+unsigned long long int edacs_bch (unsigned long long int message);
+void eot_cc(dsd_opts * opts, dsd_state * state); //end of TX return to CC
 
 //csv imports
 int csvGroupImport(dsd_opts * opts, dsd_state * state);
@@ -1179,24 +1194,16 @@ void cleanup_rtlsdr_stream();
 void get_rtlsdr_sample(int16_t *sample, dsd_opts * opts, dsd_state * state);
 void rtlsdr_sighandler();
 void rtl_dev_tune(dsd_opts * opts, long int frequency);
-int rtl_return_rms();
+long int rtl_return_rms();
 void rtl_clean_queue();
 #endif
-//DMR TRELLIS
-void CDMRTrellisTribitsToBits(const unsigned char* tribits, unsigned char* payload);
-unsigned int CDMRTrellisCheckCode(const unsigned char* points, unsigned char* tribits);
-bool CDMRTrellisFixCode(unsigned char* points, unsigned int failPos, unsigned char* payload);
-void CDMRTrellisDeinterleave(const unsigned char* data, signed char* dibits);
-void CDMRTrellisDibitsToPoints(const signed char* dibits, unsigned char* points);
-void CDMRTrellisPointsToDibits(const unsigned char* points, signed char* dibits);
-void CDMRTrellisBitsToTribits(const unsigned char* payload, unsigned char* tribits);
-bool CDMRTrellisDecode(const unsigned char* data, unsigned char* payload);
+
 
 //Phase 2 Helper Functions
 int ez_rs28_ess (int payload[96], int parity[168]); //ezpwd bridge for FME
 int ez_rs28_facch (int payload[156], int parity[114]); //ezpwd bridge for FME
 int ez_rs28_sacch (int payload[180], int parity[132]); //ezpwd bridge for FME
-int isch_lookup (unsigned long long int isch); //isch map lookup
+int isch_lookup (uint64_t isch); //isch map lookup
 int bd_bridge (int payload[196], uint8_t decoded[12]); //bridge to Michael Ossmann Block De-interleaver and 1/2 rate trellis decoder
 int crc16_lb_bridge (int payload[190], int len);
 int crc12_xb_bridge (int payload[190], int len);

src/dmr_34.c

@@ -0,0 +1,136 @@
+/*-------------------------------------------------------------------------------
+ * dmr_34.c
+ * DMR 3/4 Rate Simple Trellis Decoder
+ *
+ * LWVMOBILE
+ * 2023-08 DSD-FME Florida Man Edition
+ *-----------------------------------------------------------------------------*/
+
+#include "dsd.h"
+
+uint8_t interleave[98] = {
+0, 1, 8,   9, 16, 17, 24, 25, 32, 33, 40, 41, 48, 49, 56, 57, 64, 65, 72, 73, 80, 81, 88, 89, 96, 97,
+2, 3, 10, 11, 18, 19, 26, 27, 34, 35, 42, 43, 50, 51, 58, 59, 66, 67, 74, 75, 82, 83, 90, 91,
+4, 5, 12, 13, 20, 21, 28, 29, 36, 37, 44, 45, 52, 53, 60, 61, 68, 69, 76, 77, 84, 85, 92, 93,
+6, 7, 14, 15, 22, 23, 30, 31, 38, 39, 46, 47, 54, 55, 62, 63, 70, 71, 78, 79, 86, 87, 94, 95};
+
+//this is a convertion table for converting the dibit pairs into contellation points
+uint8_t constellation_map[16] = {
+11, 12, 0, 7, 14, 9, 5, 2, 10, 13, 1, 6, 15, 8, 4, 3
+};
+
+//digitized dibit to OTA symbol conversion for reference
+//0 = +1; 1 = +3; 
+//2 = -1; 3 = -3; 
+
+//finite state machine values
+uint8_t fsm[64] = {
+0,  8, 4, 12, 2, 10, 6, 14,
+4, 12, 2, 10, 6, 14, 0,  8,
+1,  9, 5, 13, 3, 11, 7, 15,
+5, 13, 3, 11, 7, 15, 1,  9,
+3, 11, 7, 15, 1,  9, 5, 13,
+7, 15, 1,  9, 5, 13, 3, 11,
+2, 10, 6, 14, 0,  8, 4, 12,
+6, 14, 0,  8, 4, 12, 2, 10};
+
+uint32_t dmr_34(uint8_t * input, uint8_t treturn[18])
+{
+  int i, j;
+  uint32_t irr_err = 0;
+
+  uint8_t deinterleaved_dibits[98];
+  memset (deinterleaved_dibits, 0, sizeof(deinterleaved_dibits));
+
+  //deinterleave our input dibits
+  for (i = 0; i < 98; i++)
+    deinterleaved_dibits[interleave[i]] = input[i];
+
+  //pack the input into nibbles (dibit pairs)
+  uint8_t nibs[49];
+  memset (nibs, 0, sizeof(nibs));
+
+  for (i = 0; i < 49; i++)
+    nibs[i] = (deinterleaved_dibits[i*2+0] << 2) | (deinterleaved_dibits[i*2+1] << 0);
+
+  //convert our dibit pairs into constellation point values
+  uint8_t point[49];
+  memset (point, 0xFF, sizeof(point));
+
+  for (i = 0; i < 49; i++) 
+    point[i] = constellation_map[nibs[i]];
+
+  //debug view points -- point[0] should be zero
+  // fprintf (stderr, "\n P =");
+  // for (i = 0; i < 49; i++) 
+  //   fprintf (stderr, " %02d", point[i]);
+
+  //free-bee on err correction, point[0] should always be zero (flush bits)
+  point[0] = 0;
+
+  //convert constellation points into tribit values using the FSM
+  uint8_t state = 0;
+  uint32_t tribits[49];
+  memset (tribits, 0xF, sizeof(tribits));
+
+  for (i = 0; i < 49; i++)
+  {
+
+    for (j = 0; j < 8; j++)
+    {
+      if ( fsm[(state*8)+j] == point[i] )
+      {
+        //return our tribit value and state for the next point
+        tribits[i] = state = (uint8_t)j;
+        break;
+      }
+    }
+
+    //if tribit value is greater than 7, then we have a decoding error
+    if (tribits[i] > 7)
+    {
+      irr_err++; //tally number of errors
+
+      //debug position of error and state value
+      // fprintf (stderr, " %d:%d;", i, state);
+
+      //Make a hard decision and flip point to fit in current state
+      point[i] ^= 7; //lucky number 7 (0111)
+
+      //NOTE: Ideally, a full path metric to find the surviving path
+      //is the best way to correct this, but it is also complex and no garauntee to fix errs
+
+      //decrement one and try again
+      if (i != 0) i--;
+     
+    }
+
+  }
+
+  //debug view tribits/states
+  // fprintf (stderr, "\n T =");
+  // for (i = 0; i < 49; i++) 
+  //   fprintf (stderr, " %02d", tribits[i]);
+
+  //convert tribits into a return payload
+  uint32_t temp = 0;
+  if (1 == 1) //irr_err == 0
+  {
+    //break into chunks of 24 bit values and shuffle into 8-bit (byte) treturn values
+    for (i = 0; i < 6; i++)
+    {
+      temp = (tribits[(i*8)+0] << 21) + (tribits[(i*8)+1] << 18) + (tribits[(i*8)+2] << 15) + (tribits[(i*8)+3] << 12) + (tribits[(i*8)+4] << 9) + (tribits[(i*8)+5] << 6) + (tribits[(i*8)+6] << 3) + (tribits[(i*8)+7] << 0);
+
+      treturn[(i*3)+0] = (temp >> 16) & 0xFF;
+      treturn[(i*3)+1] = (temp >>  8) & 0xFF;
+      treturn[(i*3)+2] = (temp >>  0) & 0xFF;
+    }
+  }
+
+  //trellis point/state err tally
+  if (irr_err != 0)
+    fprintf (stderr, " ERR = %d", irr_err);
+
+  return (irr_err);
+}
+

src/dmr_csbk.c

@@ -64,7 +64,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
       fprintf (stderr, "%s", KYEL); 
       
       //7.1.1.1.1 Channel Grant CSBK/MBC PDU
-      if (csbk_o > 47 && csbk_o < 55 )
+      if (csbk_o >= 48 && csbk_o <= 56 )
       {
 
         //maintain this to allow users to hardset the cc freq as map[0]; otherwise, set from rigctl or rtl freq at c_aloha_sys_parms
@@ -83,6 +83,8 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         if (csbk_o == 52) fprintf (stderr, " Talkgroup Data Channel Grant: Single Item (TD_GRANT)");
         if (csbk_o == 53) fprintf (stderr, " Duplex Private Voice Channel Grant (PV_GRANT_DX)");
         if (csbk_o == 54) fprintf (stderr, " Duplex Private Data Channel Grant (PD_GRANT_DX)");
+        if (csbk_o == 55) fprintf (stderr, " Private Data Channel Grant: Multi Item (PD_GRANT)");
+        if (csbk_o == 56) fprintf (stderr, " Talkgroup Data Channel Grant: Multi Item (TD_GRANT)");
 
         //Logical Physical Channel Number
         uint16_t lpchannum = (uint16_t)ConvertBitIntoBytes(&cs_pdu_bits[16], 12); 
@@ -104,6 +106,14 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         uint32_t target = (uint32_t)ConvertBitIntoBytes(&cs_pdu_bits[32], 24);
         uint32_t source = (uint32_t)ConvertBitIntoBytes(&cs_pdu_bits[56], 24);
 
+        //broadcast calls show no tgt/src info in ETSI manaual, but seem to correspond with same values in embedded link control
+        // if (csbk_o == 50)
+        // {
+        //   //seeting to all MS units and Dispatch? May need to just set to 0 and see what emb pulls out of it
+        //   target = 0xFFFFFF; //ALLMSI
+        //   source = 0xFFFECB; //DISPATI
+        // }
+
         //move mbc variables out of if statement
         uint8_t mbc_lb = 0; //
         uint8_t mbc_pf = 0;
@@ -120,10 +130,14 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         uint16_t mbc_abs_rx_step = 0;
 
         fprintf (stderr, "\n");
-        //added my best guess as to how dsdplus arrives at a dmr channel value (seems pretty consistent) as C+
-        fprintf (stderr, "  Ch [%03X] Cd [%04d] C+ [%04d] - TS [%d] - Target [%08d] - Source [%08d]", lpchannum, lpchannum, pluschannum, lcn, target, source);
+        //rewrote this to make it clear which is the lpcn, timeslot (lcn), and the combination of both (DSDPlus style combined LSN) on channel numbering
+        //the TS is displayed as a +1 since while the bit values are 0 or 1, the slot numbering in the manual specifically states TDMA channel (slot) 1 or TDMA channel (slot) 2
+        fprintf (stderr, "  LPCN: %04d; TS: %d; LPCN+TS: %04d; Target: %08d - Source: %08d ", lpchannum, lcn+1, pluschannum, target, source);
 
-        if (st2) fprintf (stderr, " Emergency");
+        if (st2) fprintf (stderr, "Emergency; ");
+
+        //check for special gateway identifiers (probably just on broadcast?)
+        dmr_gateway_identifier (source, target);
 
         if (lpchannum == 0xFFF) //This is from an MBC, signalling an absolute and not a logical
         {
@@ -149,7 +163,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
             //tx_int (Mhz) + (tx_step * 125) = tx_freq
             //rx_int (Mhz) + (rx_step * 125) = rx_freq
             fprintf (stderr, "\n");
-            fprintf (stderr, "  ABS-CHAN [%03X][%04d] - RX INT [%d][%X] - RX STEP [%d][%X]", mbc_lpchannum, mbc_lpchannum, mbc_abs_rx_int, mbc_abs_rx_int, mbc_abs_rx_step, mbc_abs_rx_step );
+            fprintf (stderr, "  RX ABS LPCN: %04d; RX INT: %d; RX STEP: %d;", mbc_lpchannum, mbc_abs_rx_int, mbc_abs_rx_step );
             //The Frequency we want to tune is the RX Frequency
             freq = (mbc_abs_rx_int * 1000000 ) + (mbc_abs_rx_step * 125); 
           }
@@ -157,13 +171,16 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         }
 
         //print frequency from absolute
-        if (freq != 0 && lpchannum == 0xFFF) fprintf (stderr, "\n  Frequency [%.6lf] MHz", (double)freq/1000000);
+        if (freq != 0 && lpchannum == 0xFFF)
+          fprintf (stderr, "\n  Frequency: %.6lf MHz", (double)freq/1000000);
 
         //run external channel map function on logical
         if (lpchannum != 0 && lpchannum != 0xFFF)
         {
           freq = state->trunk_chan_map[lpchannum];
-          (stderr, "\n  Frequency [%.6lf] MHz", (double)freq/1000000);
+          if (freq != 0)
+            fprintf (stderr, "\n  Frequency: %.6lf MHz", (double)freq/1000000);
+          else fprintf (stderr, "\n  Frequency Not Found in Channel Map;");
         }
 
         //add active channel string to display
@@ -188,7 +205,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         if (csbk_o == 50) csbk_o = 49; //flip to normal group call for group tuning
 
         //Allow tuning of data calls if user wishes by flipping the csbk_o to a group voice call
-        if (csbk_o == 51 || csbk_o == 52 || csbk_o == 54)
+        if (csbk_o == 51 || csbk_o == 52 || csbk_o == 54 || csbk_o == 55 || csbk_o == 56)
         {
           if (opts->trunk_tune_data_calls == 1) csbk_o = 49;
         }
@@ -221,6 +238,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
           if ( (time(NULL) - state->last_vc_sync_time > 2) ) 
           {
             char mode[8]; //allow, block, digital, enc, etc
+            sprintf (mode, "%s", "");
 
             //if we are using allow/whitelist mode, then write 'B' to mode for block
             //comparison below will look for an 'A' to write to mode if it is allowed
@@ -232,6 +250,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
               {
                 fprintf (stderr, " [%s]", state->group_array[i].groupName);
                 strcpy (mode, state->group_array[i].groupMode);
+                break;
               }
             } 
 
@@ -242,6 +261,18 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
                 //RIGCTL
                 if (opts->use_rigctl == 1)
                 {
+                  //we will want to set these values here, some Tier 3 systems prefer P_Protects (Tait) over VLC and TLC headers
+                  //and is faster than waiting on good embedded link control
+                  if (lcn == 0)
+                  {
+                    state->lasttg = target;
+                    state->lastsrc = source;
+                  }
+                  if (lcn == 1)
+                  {
+                    state->lasttgR = target;
+                    state->lastsrcR = source;
+                  }
                   if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); 
                   SetFreq(opts->rigctl_sockfd, freq);
                   state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
@@ -253,6 +284,18 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
                 else if (opts->audio_in_type == 3)
                 {
                   #ifdef USE_RTLSDR
+                  //we will want to set these values here, some Tier 3 systems prefer P_Protects (Tait) over VLC and TLC headers
+                  //and is faster than waiting on good embedded link control
+                  if (lcn == 0)
+                  {
+                    state->lasttg = target;
+                    state->lastsrc = source;
+                  }
+                  if (lcn == 1)
+                  {
+                    state->lasttgR = target;
+                    state->lastsrcR = source;
+                  }
                   rtl_dev_tune (opts, freq);
                   state->p25_vc_freq[0] = state->p25_vc_freq[1] = freq;
                   opts->p25_is_tuned = 1;
@@ -437,7 +480,10 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         if (p_kind == 3) fprintf (stderr, " Enable Target MS PTT (EN_PTT_ONE_MS)");
 
         fprintf (stderr, "\n");
-        fprintf (stderr, "  Target [%08d] - Source [%08d]", target, source);
+        fprintf (stderr, "  Source: %08d; Target: %08d; ", source, target);
+
+        //check the source and/or target for special gateway identifiers
+        dmr_gateway_identifier (source, target);
 
       }
 
@@ -568,21 +614,82 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
       {
         //initial line break
         fprintf (stderr, "\n");
-        fprintf (stderr, " C_AHOY ");
+        fprintf (stderr, " C_AHOY - ");
+        //C_AHOY is always a single block CSBK, no need to check or deal with continuation blocks
+        uint16_t svc_opt = (uint16_t)ConvertBitIntoBytes(&cs_pdu_bits[16], 7);
+        uint8_t svc_flag = cs_pdu_bits[23]; //service kind flag
+        uint8_t als_flag = cs_pdu_bits[24]; //ambient listening service requested
+        uint8_t ahoy_gi  = cs_pdu_bits[25]; //group or individual
+        uint8_t ahoy_bf  = (uint8_t)ConvertBitIntoBytes(&cs_pdu_bits[26], 2); //UDT blocks to follow (if required)
+        uint8_t svc_kind = (uint8_t)ConvertBitIntoBytes(&cs_pdu_bits[28], 4); //'Call' Type
+        uint32_t ahoy_target = (uint32_t)ConvertBitIntoBytes(&cs_pdu_bits[32], 24);
+        uint32_t ahoy_source = (uint32_t)ConvertBitIntoBytes(&cs_pdu_bits[56], 24);
+
+
+        if (ahoy_gi == 0) fprintf (stderr, "Private ");
+        else fprintf (stderr, "Group ");
+
+        //need to put SVC OPT decoding in here, maybe just copy and paste from FLC?
+
+        fprintf (stderr, "FID: %02X SVC: %02X ", csbk_fid, svc_opt);
+        if (svc_kind == 0 || svc_kind == 1) fprintf (stderr, "Voice Call ");
+        else if (svc_kind == 2 || svc_kind == 3) fprintf (stderr, "Packet Data Call ");
+        else if (svc_kind == 4 || svc_kind == 5) fprintf (stderr, "UDT Short Data Call ");
+        else if (svc_kind == 6) fprintf (stderr, "UDT Short Data Polling Service ");
+        else if (svc_kind == 7) fprintf (stderr, "Status Transport Service ");
+        else if (svc_kind == 8) fprintf (stderr, "Call Diversion Service ");
+        else if (svc_kind == 9) fprintf (stderr, "Call Answer Service ");
+        else if (svc_kind == 10) fprintf (stderr, "Full Duplex Voice Call ");
+        else if (svc_kind == 11) fprintf (stderr, "Full Duplex Packet Data Call ");
+        else if (svc_kind == 12) fprintf (stderr, "Reserved ");
+        else if (svc_kind == 13) fprintf (stderr, "Supplimentary Service (Stun/Revive/Kill/Auth): ");
+        else if (svc_kind == 14) fprintf (stderr, "Registration/Authentication ");
+        else if (svc_kind == 15) fprintf (stderr, "Cancel Call Service ");
+
+        fprintf (stderr, "Target: %d; Source: %d; ", ahoy_target, ahoy_source);
+
+        //check the source and/or target for special gateway identifiers
+        dmr_gateway_identifier (ahoy_source, ahoy_target);
+
       }
 
       if (csbk_o == 42) 
       {
         //initial line break
         fprintf (stderr, "\n");
-        fprintf (stderr, " P_MAINT ");
+        fprintf (stderr, " P_MAINT -");
+
+        //I can't recall ever seeing a p_maint use, always see a p_clear though
+        uint16_t pm_res1 = (uint16_t)ConvertBitIntoBytes(&cs_pdu_bits[16], 12);
+        uint8_t  pm_kind = (uint8_t)ConvertBitIntoBytes(&cs_pdu_bits[28], 3);
+        uint8_t  pm_res2 = cs_pdu_bits[31];
+        uint32_t pm_target = (uint32_t)ConvertBitIntoBytes(&cs_pdu_bits[32], 24); //should be TSI (clear the call)
+        uint32_t pm_source = (uint32_t)ConvertBitIntoBytes(&cs_pdu_bits[56], 24);
+
+        if (pm_kind == 0) fprintf (stderr, "Disconnect; ");
+        else fprintf (stderr, " Res Kind: %02X", pm_kind);
+
+        if (pm_res1) fprintf (stderr, "Res A: %03X", pm_res1);
+        if (pm_res2) fprintf (stderr, "Res B: 1");
+
+        fprintf (stderr, "Target: %d; Source: %d; ", pm_target, pm_source);
+
+        //check the source and/or target for special gateway identifiers
+        dmr_gateway_identifier (pm_source, pm_target);
       }
 
       if (csbk_o == 30) 
       {
         //initial line break
         fprintf (stderr, "\n");
-        fprintf (stderr, " C_ACKVIT ");
+        fprintf (stderr, " C_ACKVIT (Ackvitation/Authorization) ");
+      }
+
+      if (csbk_o == 33) 
+      {
+        //initial line break
+        fprintf (stderr, "\n");
+        fprintf (stderr, " C_ACKD (Acknowledgement)");
       }
 
       if (csbk_o == 31) 
@@ -1027,6 +1134,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
             for (j = start; j < end; j++) //go through the channels stored looking for active ones to tune to
             {
               char mode[8]; //allow, block, digital, enc, etc
+              sprintf (mode, "%s", "");
 
               //if we are using allow/whitelist mode, then write 'B' to mode for block
               //comparison below will look for an 'A' to write to mode if it is allowed
@@ -1038,6 +1146,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
                 {
                   fprintf (stderr, " [%s]", state->group_array[i].groupName);
                   strcpy (mode, state->group_array[i].groupMode);
+                  break;
                 }
               }
 
@@ -1171,6 +1280,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
         }
 
         char mode[8]; //allow, block, digital, enc, etc
+        sprintf (mode, "%s", "");
 
         //if we are using allow/whitelist mode, then write 'B' to mode for block
         //comparison below will look for an 'A' to write to mode if it is allowed
@@ -1182,6 +1292,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
           {
             fprintf (stderr, " [%s]", state->group_array[i].groupName);
             strcpy (mode, state->group_array[i].groupMode);
+            break;
           }
         }
 
@@ -1366,6 +1477,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
           for (j = 0; j < 6; j++) //go through the channels stored looking for active ones to tune to
           {
             char mode[8]; //allow, block, digital, enc, etc
+            sprintf (mode, "%s", "");
 
             //if we are using allow/whitelist mode, then write 'B' to mode for block
             //comparison below will look for an 'A' to write to mode if it is allowed
@@ -1380,6 +1492,7 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
               {
                 fprintf (stderr, " [%s]", state->group_array[i].groupName);
                 strcpy (mode, state->group_array[i].groupMode);
+                break;
               }
             }
 
@@ -1485,4 +1598,43 @@ void dmr_cspdu (dsd_opts * opts, dsd_state * state, uint8_t cs_pdu_bits[], uint8
   END:
   fprintf (stderr, "%s", KNRM);  
 
+}
+
+//translate special gateway identifier addresses
+void dmr_gateway_identifier (uint32_t source, uint32_t target)
+{
+  int i;
+  uint32_t id;
+  for (i = 0; i < 2; i++)
+  {
+    if (i == 0) id = source;
+    else id = target;
+    if (id == 0xFFFEC0) fprintf (stderr, "PSTNI; ");
+    if (id == 0xFFFEC1) fprintf (stderr, "PABXI; ");
+    if (id == 0xFFFEC2) fprintf (stderr, "LINEI; ");
+    if (id == 0xFFFEC3) fprintf (stderr, "IPI; ");
+    if (id == 0xFFFEC4) fprintf (stderr, "SUPLI; ");
+    if (id == 0xFFFEC5) fprintf (stderr, "SDMI; ");
+    if (id == 0xFFFEC6) fprintf (stderr, "REGI; ");
+    if (id == 0xFFFEC7) fprintf (stderr, "MSI; ");
+    if (id == 0xFFFEC8) fprintf (stderr, "RESERVED; ");
+    if (id == 0xFFFEC9) fprintf (stderr, "DIVERTI; ");
+    if (id == 0xFFFECA) fprintf (stderr, "TSI; ");
+    if (id == 0xFFFECB) fprintf (stderr, "DISPATI; ");
+    if (id == 0xFFFECC) fprintf (stderr, "STUNI; ");
+    if (id == 0xFFFECD) fprintf (stderr, "AUTHI; ");
+    if (id == 0xFFFECE) fprintf (stderr, "GPI; ");
+    if (id == 0xFFFECF) fprintf (stderr, "KILLI; ");
+    if (id == 0xFFFED0) fprintf (stderr, "PSTNDI; ");
+    if (id == 0xFFFED1) fprintf (stderr, "PABXDI; ");
+    if (id == 0xFFFED2) fprintf (stderr, "LINEDI; ");
+    if (id == 0xFFFED3) fprintf (stderr, "DISPATDI; ");
+    if (id == 0xFFFED4) fprintf (stderr, "ALLMSI; ");
+    if (id == 0xFFFED5) fprintf (stderr, "IPDI; ");
+    if (id == 0xFFFED6) fprintf (stderr, "DGNAI; ");
+    if (id == 0xFFFED7) fprintf (stderr, "TATTSI; ");
+    if (id == 0xFFFFFD) fprintf (stderr, "ALLMSIDL; ");
+    if (id == 0xFFFFFE) fprintf (stderr, "ALLMSIDZ; ");
+    if (id == 0xFFFFFF) fprintf (stderr, "ALLMSID; ");
+  }
 }

src/dmr_dburst.c

@@ -418,34 +418,29 @@ void dmr_data_burst_handler(dsd_opts * opts, dsd_state * state, uint8_t info[196
 
   }
 
-  //the ugly one
+  //the sexy one
   if (is_trellis)
   {
     CRCExtracted = 0;
     CRCComputed = 0;
     IrrecoverableErrors = 1; 
-    bool trellis_good = TRUE;
 
     uint8_t tdibits[98];
     memset (tdibits, 0, sizeof(tdibits));
 
-    //reconstitute info bits into reverse ordered dibits for the trellis decoder
+    //reconstitute info bits into dibits for the trellis decoder
     for (i = 0; i < 98; i++)
-    {
-      tdibits[97-i] = (info[i*2] << 1) | info[i*2+1]; 
-    }
+      tdibits[i] = (info[i*2] << 1) | info[i*2+1]; 
 
-    unsigned char TrellisReturn[18];
+    uint8_t TrellisReturn[18];
     memset (TrellisReturn, 0, sizeof(TrellisReturn));
+    IrrecoverableErrors = dmr_34(tdibits, TrellisReturn);
 
-    trellis_good = CDMRTrellisDecode(tdibits, TrellisReturn);
-    if (trellis_good == TRUE) IrrecoverableErrors = 0;
-    // else (fprintf (stderr, " Trellis Failure")); //debug print
+    //NOTE: IrrecoverableErrors in this context are a tally of errors from trellis
+    //they may have been successfully corrected, the CRC will reveal as much
 
-    for (i = 0; i < pdu_len; i++) //18
-    {
-      DMR_PDU[i] = (uint8_t)TrellisReturn[i+pdu_start]; 
-    }
+    for (i = 0; i < pdu_len; i++)
+      DMR_PDU[i] = TrellisReturn[i+pdu_start]; 
 
     for(i = 0, j = 0; i < 18; i++, j+=8)
     {
@@ -471,7 +466,6 @@ void dmr_data_burst_handler(dsd_opts * opts, dsd_state * state, uint8_t info[196
       CRCExtracted = CRCExtracted ^ crcmask;
 
       //reorganize the DMR_PDU_bits array into confdatabits, just for CRC9 check
-      //confirmed working now!
       for(i = 0; i < 128; i++) confdatabits[i] = DMR_PDU_bits[i + 16];
       for(i = 0; i < 7; i++) confdatabits[i + 128] = DMR_PDU_bits[i];
 
@@ -482,10 +476,8 @@ void dmr_data_burst_handler(dsd_opts * opts, dsd_state * state, uint8_t info[196
         state->data_block_crc_valid[slot][blockcounter] = 1;
       } 
       else
-      {
-        // IrrecoverableErrors = 9; //set as a shim since the trellis decoder is a pain to fix
         state->data_block_crc_valid[slot][blockcounter] = 0;
-      } 
+
 
     }
 
@@ -505,7 +497,7 @@ void dmr_data_burst_handler(dsd_opts * opts, dsd_state * state, uint8_t info[196
 
   }
 
-  if (is_full) //Rate 1 Data
+  if (is_full) //Rate 1 Data -- todo: fix padding bits, the four padding bits are on bit 96,97,98,99
   {
     CRCExtracted = 0;
     CRCComputed = 0;
@@ -605,7 +597,7 @@ void dmr_data_burst_handler(dsd_opts * opts, dsd_state * state, uint8_t info[196
 
   // } 
 
-  if (IrrecoverableErrors != 0 && databurst != 0x09) //&& databurst != 0x05
+  if (IrrecoverableErrors != 0 && databurst != 0x08 && databurst != 0x09) //&& databurst != 0x05
   {
     fprintf (stderr, "%s", KRED);
     fprintf(stderr, " (FEC ERR)");

src/dmr_flco.c

@@ -417,17 +417,17 @@ void dmr_flco (dsd_opts * opts, dsd_state * state, uint8_t lc_bits[], uint32_t C
     //REMUS! Uncomment Line Below if desired
     // else strcat (state->call_string[slot], "          ");
 
-    //Motorola FID 0x10 Only
-    if (fid == 0x10)
+    
+    if (1 == 1) //fid == 0x10
     {
       /* Check the "Service Option" bits */ 
-      if(so & 0x20)
+      if( (fid == 0x10) && (so & 0x20) ) //Motorola FID 0x10 Only
       {
         //REMUS! Uncomment Line Below if desired
         // strcat (state->call_string[slot], " TXI");
         fprintf(stderr, "TXI ");
       }
-      if (so & 0x10)
+      if ( (fid == 0x10) && (so & 0x10) ) //Motorola FID 0x10 Only
       {
         //REMUS! Uncomment Line Below if desired
         // strcat (state->call_string[slot], " RPT");
@@ -742,6 +742,7 @@ uint8_t dmr_cach (dsd_opts * opts, dsd_state * state, uint8_t cach_bits[25])
       fprintf (stderr, "%s", KRED);
       fprintf (stderr, " SLCO CRC ERR");
       fprintf (stderr, "%s", KNRM);
+      if (opts->payload == 1) fprintf (stderr, "\n");
     } 
     
   }

src/dmr_le.c

@@ -51,6 +51,12 @@ void dmr_late_entry_mi (dsd_opts * opts, dsd_state * state)
   uint64_t go_test = 0;
   uint64_t mi_corrected = 0;
   uint64_t go_corrected = 0;
+
+  uint8_t mi_bits[36];
+  memset (mi_bits, 0, sizeof(mi_bits));
+  uint8_t mi_crc_cmp = 0;
+  uint8_t mi_crc_ext = 1;
+  uint8_t mi_crc_ok = 0;
   
   mi_test = (state->late_entry_mi_fragment[slot][1][0] << 32L) | (state->late_entry_mi_fragment[slot][2][0] << 28) | (state->late_entry_mi_fragment[slot][3][0] << 24) |
             (state->late_entry_mi_fragment[slot][1][1] << 20) | (state->late_entry_mi_fragment[slot][2][1] << 16) | (state->late_entry_mi_fragment[slot][3][1] << 12) |
@@ -77,12 +83,22 @@ void dmr_late_entry_mi (dsd_opts * opts, dsd_state * state)
       mi_corrected |= mi_go_bits[i];
       go_corrected = go_corrected << 1;
       go_corrected |= mi_go_bits[i+12];
+      //manipulate for crc check
+      mi_bits[i+(j*12)] = mi_go_bits[i];
     }
   }
 
   int mi_final = 0; 
   mi_final = (mi_corrected >> 4) & 0xFFFFFFFF;
 
+  mi_crc_ext = (uint8_t)ConvertBitIntoBytes(&mi_bits[32], 4);
+  mi_crc_cmp = crc4(mi_bits, 32);
+  if (mi_crc_ext == mi_crc_cmp)
+    mi_crc_ok = 1;
+
+  //debug -- working now
+  // fprintf (stderr, " LE MI: %09llX; CRC EXT: %X; CRC CMP: %X; \n", mi_corrected, mi_crc_ext, mi_crc_cmp);
+
   if (g[0] && g[1] && g[2])
   {
     if (slot == 0 && state->payload_algid != 0)
@@ -90,8 +106,11 @@ void dmr_late_entry_mi (dsd_opts * opts, dsd_state * state)
       if (state->payload_mi != mi_final) 
       {
         fprintf (stderr, "%s", KCYN);
-        fprintf (stderr, " Slot 1 PI/LFSR and Late Entry MI Mismatch - %08X : %08X \n", state->payload_mi, mi_final);
-        state->payload_mi = mi_final; 
+        fprintf (stderr, " Slot 1 PI/LFSR and Late Entry MI Mismatch - %08X : %08X ", state->payload_mi, mi_final);
+        state->payload_mi = mi_final;
+        if (mi_crc_ok == 1) fprintf (stderr, "(CRC OK)");
+        else fprintf (stderr, "(CRC ERR)");
+        fprintf (stderr, "\n");
         fprintf (stderr, "%s", KNRM);
       }
       //run afterwards, or le verification won't match up properly
@@ -106,8 +125,11 @@ void dmr_late_entry_mi (dsd_opts * opts, dsd_state * state)
       if (state->payload_miR != mi_final)
       {
         fprintf (stderr, "%s", KCYN);
-        fprintf (stderr, " Slot 2 PI/LFSR and Late Entry MI Mismatch - %08X : %08X \n", state->payload_miR, mi_final);
+        fprintf (stderr, " Slot 2 PI/LFSR and Late Entry MI Mismatch - %08X : %08X ", state->payload_miR, mi_final);
         state->payload_miR = mi_final;
+        if (mi_crc_ok == 1) fprintf (stderr, "(CRC OK)");
+        else fprintf (stderr, "(CRC ERR)");
+        fprintf (stderr, "\n");
         fprintf (stderr, "%s", KNRM);
       }
       //run afterwards, or le verification won't match up properly
@@ -268,7 +290,7 @@ void dmr_sbrc (dsd_opts * opts, dsd_state * state, uint8_t power)
   }
   
   uint8_t sbrc_opcode = sbrc_hex & 0x7; //opcode and alg the same bits, but the alg is present when CRC is bad (I know they are limited on bits, but I hate that idea)
-  uint8_t alg = sbrc_hex & 0x7;
+  uint8_t alg = sbrc_hex & 0x7; //SEE: https://patents.google.com/patent/EP2347540B1/en
   uint8_t key = (sbrc_hex >> 3) & 0xFF;
   uint8_t txi_delay = (sbrc_hex >> 3) & 0x1F; //middle five are the 'delay' value on a TXI system
 
@@ -299,22 +321,30 @@ void dmr_sbrc (dsd_opts * opts, dsd_state * state, uint8_t power)
       else if (crc3_okay == 1 && (sbrc_opcode == 0 || sbrc_opcode == 3) )
       {
         //opcodes -- 0 (NULL), BR Delay (3)
-        fprintf (stderr, "\n");
-        fprintf (stderr, " TXI Op: %X - ", sbrc_opcode);
+        if (opts->payload == 0) fprintf (stderr, "\n");
+        fprintf (stderr, "%s", KCYN);
+        fprintf (stderr, " TXI Op: %X -", sbrc_opcode);
         if      (sbrc_opcode == 0) fprintf (stderr, " Null; ");
         else if (sbrc_opcode == 3) 
         {
           if (txi_delay != 0)
-            fprintf (stderr, " BR Delay: %d - %d ms; ", txi_delay, txi_delay * 30); //could also indicate number of superframes until next VC6 pre-emption
+            fprintf (stderr, " BR Delay: %d - %d ms;", txi_delay, txi_delay * 30); //could also indicate number of superframes until next VC6 pre-emption
           else fprintf (stderr, "BR Delay: Irrelevant / Send at any time;");
+
+          //alignment of inbound backwards channel and outbound burst
+          if (txi_delay == 2) fprintf (stderr, " SF3, Burst E;"); //E is inbound
+          if (txi_delay == 4) fprintf (stderr, " SF3, Burst D;"); //D is inbound
+          if (txi_delay == 6) fprintf (stderr, " SF3, Burst C;"); //C is inbound
+          if (txi_delay == 8) fprintf (stderr, " SF3, Burst B;"); //B is inbound
         }
         else fprintf (stderr, " Unk; ");
+        fprintf (stderr, "%s", KNRM);
 
         if (opts->payload == 1) fprintf (stderr, "\n"); //only during payload
 
       }
 
-      else if (sbrc_opcode != 0 || sbrc_opcode != 3) //all that should be left in this field is the potential ENC identifiers
+      else if (sbrc_opcode != 0 && sbrc_opcode != 3) //all that should be left in this field is the potential ENC identifiers
       {
 
         if (slot == 0) //may not need the state->errs anymore //&& state->errs < 3
@@ -325,12 +355,11 @@ void dmr_sbrc (dsd_opts * opts, dsd_state * state, uint8_t power)
             if (state->M == 0)
             {
               fprintf (stderr, "\n");
-              fprintf (stderr, "%s ", KYEL);
+              fprintf (stderr, "%s", KCYN);
               fprintf (stderr, " Slot 1");
-              fprintf (stderr, " DMR LE SB ALG ID: %X KEY ID: %0X", alg + 0x20, key);
-              // fprintf (stderr, "\n");
+              fprintf (stderr, " DMR LE SB ALG ID: 0x%02X KEY ID: 0x%02X", alg + 0x20, key);
               fprintf (stderr, "%s ", KNRM);
-
+              if (opts->payload == 1) fprintf (stderr, "\n");
               state->payload_keyid = key;
               state->payload_algid = alg + 0x20; //assuming DMRA approved alg values (moto patent)
             }
@@ -346,12 +375,11 @@ void dmr_sbrc (dsd_opts * opts, dsd_state * state, uint8_t power)
             if (state->M == 0)
             {
               fprintf (stderr, "\n");
-              fprintf (stderr, "%s ", KYEL);
+              fprintf (stderr, "%s", KCYN);
               fprintf (stderr, " Slot 2");
-              fprintf (stderr, " DMR LE SB ALG ID: %X KEY ID: %0X", alg + 0x20, key);
-              // fprintf (stderr, "\n");
+              fprintf (stderr, " DMR LE SB ALG ID: 0x%02X KEY ID: 0x%02X", alg + 0x20, key);
               fprintf (stderr, "%s ", KNRM);
-
+              if (opts->payload == 1) fprintf (stderr, "\n");
               state->payload_keyidR = key;
               state->payload_algidR = alg + 0x20; //assuming DMRA approved alg values (moto patent)
             }
@@ -408,3 +436,26 @@ uint8_t crc3(uint8_t bits[], unsigned int len)
   return crc;
 }
 
+uint8_t crc4(uint8_t bits[], unsigned int len)
+{
+  uint8_t crc=0;
+  unsigned int K = 4;
+  //x^4+x+1 
+  uint8_t poly[5] = {1,0,0,1,1};
+  uint8_t buf[256];
+  if (len+K > sizeof(buf)) {
+    return 0;
+  }
+  memset (buf, 0, sizeof(buf));
+  for (unsigned int i=0; i<len; i++){
+    buf[i] = bits[i];
+  }
+  for (unsigned int i=0; i<len; i++)
+    if (buf[i])
+      for (unsigned int j=0; j<K+1; j++)
+        buf[i+j] ^= poly[j];
+  for (unsigned int i=0; i<K; i++){
+    crc = (crc << 1) + buf[len + i];
+  }
+  return crc ^ 0xF; //invert
+}

src/dsd_audio.c

@@ -26,9 +26,11 @@ void closePulseOutput (dsd_opts * opts)
 {
   pa_simple_free (opts->pulse_digi_dev_out);
   if (opts->dmr_stereo == 1)
-  {
     pa_simple_free (opts->pulse_digi_dev_outR);
-  }
+
+  if (opts->frame_provoice == 1 || opts->monitor_input_audio == 1) //EDACS analog calls and/or monitoring source analog audio
+    pa_simple_free (opts->pulse_raw_dev_out);
+
 }
 
 void closePulseInput (dsd_opts * opts)
@@ -47,10 +49,9 @@ void openPulseOutput(dsd_opts * opts)
   tt.channels = opts->pulse_digi_out_channels; //doing tests with 2 channels at 22050 for 44100 audio default in pulse
   tt.rate = opts->pulse_digi_rate_out; //48000, switches to 8000 when using RTL dongle
 
-  if (opts->monitor_input_audio == 1)
-  {
-    opts->pulse_raw_dev_out  = pa_simple_new(NULL, "DSD-FME3", PA_STREAM_PLAYBACK, NULL, "Raw Audio Out", &ss, NULL, NULL, NULL);
-  }
+  //reconfigured to open when using edacs or raw analog monitor so we can have a analog audio out that runs at 48k1 and not 8k1 float/short
+  if (opts->frame_provoice == 1 || opts->monitor_input_audio == 1)
+    opts->pulse_raw_dev_out  = pa_simple_new(NULL, "DSD-FME3", PA_STREAM_PLAYBACK, NULL, "Analog", &ss, 0, NULL, NULL);
 
 //tt
   pa_channel_map* left = 0; //NULL and 0 are same in this context

src/dsd_dibit.c

@@ -217,8 +217,7 @@ invert_dibit(int dibit)
     return -1;
 }
 
-static int digitize (dsd_opts* opts, dsd_state* state, int symbol)
-//int digitize (dsd_opts* opts, dsd_state* state, int symbol)
+int digitize (dsd_opts* opts, dsd_state* state, int symbol)
 {
   // determine dibit state
   if ((state->synctype == 6) || (state->synctype == 14)|| (state->synctype == 18) || (state->synctype == 37))

src/dsd_file.c

@@ -34,7 +34,11 @@ char * getTimeF(void) //get pretty hh:mm:ss timestamp
 }
 
 char * getDateF(void) {
-  char datename[80]; //32-bit needs this to be 80
+  #ifdef AERO_BUILD
+  char datename[80];
+  #else
+  char datename[99];
+  #endif
   char * curr2;
   struct tm * to;
   time_t t;
@@ -530,7 +534,7 @@ void openWavOutFileRaw (dsd_opts * opts, dsd_state * state)
   info.samplerate = 48000; //8000
   info.channels = 1;
   info.format = SF_FORMAT_WAV | SF_FORMAT_PCM_16 | SF_ENDIAN_LITTLE;
-  opts->wav_out_raw = sf_open (opts->wav_out_file_raw, SFM_RDWR, &info);
+  opts->wav_out_raw = sf_open (opts->wav_out_file_raw, SFM_WRITE, &info);
   if (opts->wav_out_raw == NULL)
   {
     fprintf (stderr,"Error - could not open raw wav output file %s\n", opts->wav_out_file_raw);

src/dsd_frame.c

@@ -177,19 +177,19 @@ processFrame (dsd_opts * opts, dsd_state * state)
       {
 
         sprintf (state->fsubtype, " VOICE        ");
-        if (opts->dmr_stereo == 0 && state->synctype < 32) // -T option for DMR (TDMA) stereo
+        if (opts->dmr_stereo == 0 && state->synctype < 32)
         {
           sprintf (state->slot1light, " slot1 ");
           sprintf (state->slot2light, " slot2 ");
           //we can safely open MBE on any MS or mono handling
           if ((opts->mbe_out_dir[0] != 0) && (opts->mbe_out_f == NULL)) openMbeOutFile (opts, state); 
-          dmrMSBootstrap (opts, state); 
+          if (opts->p25_trunk == 0) dmrMSBootstrap (opts, state); 
         }
         if (opts->dmr_mono == 1 && state->synctype == 32)
         {
           //we can safely open MBE on any MS or mono handling
           if ((opts->mbe_out_dir[0] != 0) && (opts->mbe_out_f == NULL)) openMbeOutFile (opts, state);
-          dmrMSBootstrap (opts, state); 
+          if (opts->p25_trunk == 0) dmrMSBootstrap (opts, state); 
         }
         if (opts->dmr_stereo == 1) //opts->dmr_stereo == 1
         {
@@ -198,7 +198,7 @@ processFrame (dsd_opts * opts, dsd_state * state)
           {
             //we can safely open MBE on any MS or mono handling
             if ((opts->mbe_out_dir[0] != 0) && (opts->mbe_out_f == NULL)) openMbeOutFile (opts, state);
-            dmrMSBootstrap (opts, state); //bootstrap into MS Bootstrap (voice only)
+            if (opts->p25_trunk == 0) dmrMSBootstrap (opts, state); //bootstrap into MS Bootstrap (voice only)
           }
           else dmrBSBootstrap (opts, state); //bootstrap into BS Bootstrap
         }
@@ -207,7 +207,7 @@ processFrame (dsd_opts * opts, dsd_state * state)
       {
         if (opts->mbe_out_f != NULL) closeMbeOutFile (opts, state);
         if (opts->mbe_out_fR != NULL) closeMbeOutFileR (opts, state);
-        dmrMSData (opts, state);
+        if (opts->p25_trunk == 0) dmrMSData (opts, state);
       }
       else
       {
@@ -219,7 +219,6 @@ processFrame (dsd_opts * opts, dsd_state * state)
           state->err_str[0] = 0;
           sprintf (state->slot1light, " slot1 ");
           sprintf (state->slot2light, " slot2 ");
-          state->payload_miP = 0; //zero out when switching back to data sync
           dmr_data_sync (opts, state);
         }
         //switch dmr_stereo to 0 when handling BS data frame syncs with processDMRdata
@@ -231,7 +230,6 @@ processFrame (dsd_opts * opts, dsd_state * state)
           state->dmr_stereo = 0; //set the state to zero for handling pure data frames
           sprintf (state->slot1light, " slot1 ");
           sprintf (state->slot2light, " slot2 ");
-          state->payload_miP = 0; //zero out when switching back to data sync
           dmr_data_sync (opts, state);
         }
       }
@@ -298,7 +296,7 @@ processFrame (dsd_opts * opts, dsd_state * state)
     else if ((state->synctype == 16) || (state->synctype == 9) || (state->synctype == 17) || (state->synctype == 8) || (state->synctype == 99) || (state->synctype == 98))
     {
       if (state->synctype == 98 || state->synctype == 99) //preamble only
-        skipDibit(opts, state, 184); //skip dibits to prime the demodulator
+        skipDibit(opts, state, 8); //skip dibits to prime the demodulator
       else if (state->synctype == 16 || state->synctype == 17)
         processM17STR(opts, state);
       else 

src/dsd_frame_sync.c

@@ -18,39 +18,6 @@
 #include "dsd.h"
 #include <locale.h>
 
-//borrowed from LEH/DSDcc for 'improved NXDN sync detection'
-int strncmperr(const char *s1, const char *s2, size_t size, int MaxErr)
-{
-
-  int Compare = -1;
-  size_t i = 0;
-  int err = 0;
-  int BreakBeforeEnd = 0;
-
-  if(s1 && s2)
-  {
-    for(i = 0; i < size; i++)
-    {
-      if(((s1[i] & 0xFF) != '\0') && ((s2[i] & 0xFF) != '\0'))
-      {
-        if((s1[i] & 0xFF) != (s2[i] & 0xFF)) err++;
-      }
-      else
-      {
-        BreakBeforeEnd = 1;
-        break;
-      }
-    }
-
-    if((err <= MaxErr) && (BreakBeforeEnd == 0))
-    {
-      Compare = 0;
-    }
-  } /* End if(s1 && s2) */
-
-  return Compare;
-} /* End strncmperr() */
-
 char * getTime(void) //get pretty hh:mm:ss timestamp
 {
   time_t t = time(NULL);
@@ -67,7 +34,11 @@ char * getTime(void) //get pretty hh:mm:ss timestamp
 }
 
 char * getDate(void) {
-  char datename[32];
+  #ifdef AERO_BUILD
+  char datename[80];
+  #else
+  char datename[99];
+  #endif
   char * curr2;
   struct tm * to;
   time_t t;
@@ -209,7 +180,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
   char synctest[25];
   char synctest12[13]; //dPMR
   char synctest10[11]; //NXDN FSW only
-  char synctest19[20]; //NXDN Preamble + FSW
   char synctest18[19];
   char synctest32[33];
   char synctest20[21]; //YSF
@@ -250,7 +220,7 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
   }
   else t_max = 24; //24 for everything else
 
-  int lbuf[t_max], lbuf2[t_max];
+  int lbuf[48], lbuf2[48]; //if we use t_max in these arrays, and t >=  t_max in condition below, then it can overflow those checks in there if t exceeds t_max
   int lsum;
   char spectrum[64];
   //init the lbuf
@@ -740,10 +710,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
             			fprintf (stderr, " P2 Missing Parameters            ");
             			fprintf (stderr, "%s", KNRM);
             		}
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (35); //35
               }
@@ -779,10 +745,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
             		}
 
                 state->lastsynctype = 36; //36
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (36); //36
               }
@@ -814,10 +776,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   printFrameSync (opts, state, "+dPMR ", synctest_pos + 1, modulation);
                 }
                 state->lastsynctype = 21;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 return (21);
               }
               if(strcmp(synctest12, DPMR_FRAME_SYNC_3) == 0)
@@ -850,10 +808,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                 }
 
                 state->lastsynctype = 25;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 return (25);
               }
               if(strcmp(synctest12, INV_DPMR_FRAME_SYNC_3) == 0)
@@ -892,20 +846,12 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   //state->firstframe = 1;
                 }
                 state->lastsynctype = 33; //33
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 return (33); //33
               }
               else //inverted MS voice frame
               {
                 sprintf(state->ftype, "DMR MS");
                 state->lastsynctype = 32;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 return (32);
               }
             }
@@ -932,10 +878,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   //state->firstframe = 1;
                 }
                 state->lastsynctype = 34;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 return (34);
               }
             }
@@ -961,20 +903,12 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   //state->firstframe = 1;
                 }
                 state->lastsynctype = 32;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 return (32);
               }
               else //inverted MS data frame
               {
                 sprintf(state->ftype, "DMR MS");
                 state->lastsynctype = 33;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 return (33);
               }
 
@@ -997,10 +931,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   printFrameSync (opts, state, "+DMR ", synctest_pos + 1, modulation);
                 }
                 state->lastsynctype = 10;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL); 
                 return (10);
               }
@@ -1017,10 +947,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   state->firstframe = 1;
                 }
                 state->lastsynctype = 11;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL); 
                 return (11); //11
               }
@@ -1042,10 +968,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   //printFrameSync (opts, state, "+DMR ", synctest_pos + 1, modulation);
                 }
                 state->lastsynctype = 33;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (33);
               }
@@ -1062,10 +984,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   state->firstframe = 1;
                 }
                 state->lastsynctype = 32;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (32);
               }
@@ -1087,10 +1005,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   //printFrameSync (opts, state, "+DMR ", synctest_pos + 1, modulation);
                 }
                 state->lastsynctype = 33;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (33);
               }
@@ -1107,10 +1021,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   state->firstframe = 1;
                 }
                 state->lastsynctype = 32;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (32);
               }
@@ -1136,10 +1046,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   state->firstframe = 1;
                 }
                 state->lastsynctype = 12;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL); 
                 return (12);
               }
@@ -1153,10 +1059,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   printFrameSync (opts, state, "-DMR ", synctest_pos + 1, modulation);
                 }
                 state->lastsynctype = 13;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL); 
                 return (13);
               }
@@ -1182,10 +1084,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   state->firstframe = 1;
                 }
                 state->lastsynctype = 32;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (32); //treat Direct Mode same as MS mode for now
               }
@@ -1222,10 +1120,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   state->firstframe = 1;
                 }
                 state->lastsynctype = 32;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (32);
               }
@@ -1238,10 +1132,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                   //printFrameSync (opts, state, "-DMR ", synctest_pos + 1, modulation);
                 }
                 state->lastsynctype = 33;
-                if ( opts->monitor_input_audio == 1)
-                {
-                  pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                }
                 state->last_cc_sync_time = time(NULL);
                 return (33);
               }
@@ -1252,56 +1142,61 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
 
           //ProVoice and EDACS sync
           if (opts->frame_provoice == 1)
+          {
+            strncpy (synctest32, (synctest_p - 31), 32);
+            strncpy (synctest48, (synctest_p - 47), 48);
+            if ((strcmp (synctest32, PROVOICE_SYNC) == 0) || (strcmp (synctest32, PROVOICE_EA_SYNC) == 0))
             {
-              strncpy (synctest32, (synctest_p - 31), 32);
-              strncpy (synctest48, (synctest_p - 47), 48);
-              if ((strcmp (synctest32, PROVOICE_SYNC) == 0) || (strcmp (synctest32, PROVOICE_EA_SYNC) == 0))
-              {
-                  state->last_cc_sync_time = time(NULL);
-                  state->carrier = 1;
-                  state->offset = synctest_pos;
-                  state->max = ((state->max) + lmax) / 2;
-                  state->min = ((state->min) + lmin) / 2;
-                  sprintf (state->ftype, "ProVoice ");
-                  if (opts->errorbars == 1)
-                  printFrameSync (opts, state, "+PV   ", synctest_pos + 1, modulation);
-                  state->lastsynctype = 14;
-                  return (14);
-              }
-              else if ((strcmp (synctest32, INV_PROVOICE_SYNC) == 0) || (strcmp (synctest32, INV_PROVOICE_EA_SYNC) == 0))
-              {
-                  state->last_cc_sync_time = time(NULL);
-                  state->carrier = 1;
-                  state->offset = synctest_pos;
-                  state->max = ((state->max) + lmax) / 2;
-                  state->min = ((state->min) + lmin) / 2;
-                  sprintf (state->ftype, "ProVoice ");
-                  printFrameSync (opts, state, "-PV   ", synctest_pos + 1, modulation);
-                  state->lastsynctype = 15;
-                  return (15);
-              }
-              else if ( strcmp (synctest48, EDACS_SYNC) == 0)
-              {
                 state->last_cc_sync_time = time(NULL);
                 state->carrier = 1;
                 state->offset = synctest_pos;
                 state->max = ((state->max) + lmax) / 2;
                 state->min = ((state->min) + lmin) / 2;
-                printFrameSync (opts, state, "-EDACS", synctest_pos + 1, modulation);
-                state->lastsynctype = 38; 
-                return (38);
-              }
-              else if ( strcmp (synctest48, INV_EDACS_SYNC) == 0)
-              {
+                sprintf (state->ftype, "ProVoice ");
+                if (opts->errorbars == 1)
+                printFrameSync (opts, state, "+PV   ", synctest_pos + 1, modulation);
+                state->lastsynctype = 14;
+                return (14);
+            }
+            else if ((strcmp (synctest32, INV_PROVOICE_SYNC) == 0) || (strcmp (synctest32, INV_PROVOICE_EA_SYNC) == 0))
+            {
                 state->last_cc_sync_time = time(NULL);
                 state->carrier = 1;
                 state->offset = synctest_pos;
                 state->max = ((state->max) + lmax) / 2;
                 state->min = ((state->min) + lmin) / 2;
-                printFrameSync (opts, state, "+EDACS", synctest_pos + 1, modulation);
-                state->lastsynctype = 37; 
-                return (37);
-              }
+                sprintf (state->ftype, "ProVoice ");
+                printFrameSync (opts, state, "-PV   ", synctest_pos + 1, modulation);
+                state->lastsynctype = 15;
+                return (15);
+            }
+            else if ( strcmp (synctest48, EDACS_SYNC) == 0)
+            {
+              state->last_cc_sync_time = time(NULL);
+              state->carrier = 1;
+              state->offset = synctest_pos;
+              state->max = ((state->max) + lmax) / 2;
+              state->min = ((state->min) + lmin) / 2;
+              printFrameSync (opts, state, "-EDACS", synctest_pos + 1, modulation);
+              state->lastsynctype = 38; 
+              return (38);
+            }
+            else if ( strcmp (synctest48, INV_EDACS_SYNC) == 0)
+            {
+              state->last_cc_sync_time = time(NULL);
+              state->carrier = 1;
+              state->offset = synctest_pos;
+              state->max = ((state->max) + lmax) / 2;
+              state->min = ((state->min) + lmin) / 2;
+              printFrameSync (opts, state, "+EDACS", synctest_pos + 1, modulation);
+              state->lastsynctype = 37; 
+              return (37);
+            }
+            else if ((strcmp (synctest48, DOTTING_SEQUENCE_A) == 0) || (strcmp (synctest48, DOTTING_SEQUENCE_B) == 0))
+            {
+              printFrameSync (opts, state, " EDACS DOTTING SEQUENCE: ", synctest_pos + 1, modulation);
+              eot_cc (opts, state);
+            }
 
           }
          
@@ -1319,11 +1214,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                       printFrameSync (opts, state, "+D-STAR ", synctest_pos + 1, modulation);
                     }
                   state->lastsynctype = 6;
-                  if ( opts->monitor_input_audio == 1)
-                  {
-
-                    pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                  }
                   return (6);
                 }
               if (strcmp (synctest, INV_DSTAR_SYNC) == 0)
@@ -1338,11 +1228,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                       printFrameSync (opts, state, "-D-STAR ", synctest_pos + 1, modulation);
                     }
                   state->lastsynctype = 7;
-                  if ( opts->monitor_input_audio == 1)
-                  {
-
-                    pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                  }
                   return (7);
                 }
               if (strcmp (synctest, DSTAR_HD) == 0)
@@ -1357,11 +1242,6 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                        printFrameSync (opts, state, "+D-STAR_HD ", synctest_pos + 1, modulation);
                      }
                    state->lastsynctype = 18;
-                   if ( opts->monitor_input_audio == 1)
-                   {
-
-                     pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                   }
                    return (18);
                  }
               if (strcmp (synctest, INV_DSTAR_HD) == 0)
@@ -1376,172 +1256,31 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
                        printFrameSync (opts, state, "-D-STAR_HD ", synctest_pos + 1, modulation);
                      }
                    state->lastsynctype = 19;
-                   if ( opts->monitor_input_audio == 1)
-                   {
-
-                     pa_simple_flush(opts->pulse_raw_dev_out, NULL);
-                   }
                    return (19);
                  }
 
             }
 
-          #ifdef NXDNOLDSYNC //Use FSW vs strncmperr method
-
-          //NXDN FSW sync and handling - moved to very bottom of sync stack for falsing sanity
+          //NXDN
           else if ((opts->frame_nxdn96 == 1) || (opts->frame_nxdn48 == 1))
           {
             strncpy (synctest10, (synctest_p - 9), 10); //FSW only
-            strncpy (synctest19, (synctest_p - 18), 19); //Preamble + FSW
-
-            //Preamble plus FSW, proceed right away
-            if ( (strncmperr (synctest19, NXDN_PANDFSW, 19, 1) == 0) )
-            {
-              state->carrier = 1;
-              state->offset = synctest_pos;
-              state->max = ((state->max) + lmax) / 2;
-              state->min = ((state->min) + lmin) / 2;
-              state->lastsynctype = 28;
-              state->last_cc_sync_time = time(NULL);
-              // if (opts->payload == 1) fprintf (stderr, "PANDF ");
-              // fprintf (stderr, " %s ", synctest19);
-              return (28);
-            }
-            
-            else if ( (strncmperr (synctest19, INV_NXDN_PANDFSW, 19, 1) == 0) )
-            {
-              state->carrier = 1;
-              state->offset = synctest_pos;
-              state->max = ((state->max) + lmax) / 2;
-              state->min = ((state->min) + lmin) / 2;
-              state->lastsynctype = 29;
-              state->last_cc_sync_time = time(NULL);
-              // if (opts->payload == 1) fprintf (stderr, "PANDF ");
-              // fprintf (stderr, " %s ", synctest19);
-              return (29);
-            }
-
-            else if ( (strncmperr (synctest10, NXDN_FSW, 10, 1) == 0) )
-            {
-              state->carrier = 1;
-              state->offset = synctest_pos;
-              state->max = ((state->max) + lmax) / 2;
-              state->min = ((state->min) + lmin) / 2;
-
-              if (state->lastsynctype == 28) 
-              {
-                state->last_cc_sync_time = time(NULL);
-                // if (opts->payload == 1) fprintf (stderr, "FSW   ");
-                // fprintf (stderr, " %s ", synctest10);
-                return (28);
-              }
-              state->lastsynctype = 28; //need two consecutive patterns to continue
-
-            }
-
-            else if ( (strncmperr (synctest10, INV_NXDN_FSW, 10, 1) == 0) )
-            {
-              state->carrier = 1;
-              state->offset = synctest_pos;
-              state->max = ((state->max) + lmax) / 2;
-              state->min = ((state->min) + lmin) / 2;
-
-              if (state->lastsynctype == 29) 
-              {
-                state->last_cc_sync_time = time(NULL);
-                // if (opts->payload == 1) fprintf (stderr, "FSW   ");
-                // fprintf (stderr, " %s ", synctest10);
-                return (29);
-              }
-              state->lastsynctype = 29; //need two consecutive patterns to continue
-
-            }
-          }
-
-          #else //use Current FSW Pattern
-
-          //NXDN FSW sync and handling - using more exact frame sync values
-          else if ((opts->frame_nxdn96 == 1) || (opts->frame_nxdn48 == 1))
-          {
-            strncpy (synctest10, (synctest_p - 9), 10); //FSW only
-            strncpy (synctest19, (synctest_p - 18), 19); //Preamble + FSW
-
-            //Using Hard Coded Sync Strings with variations for the areas where the symbol
-            //error will occur due to the demodulation issues internally
-
-            //Disabling the Preamble+FSW version for now
-            //its nearly impossible to catch it
-
-            //Preamble plus FSW, proceed right away
-            // if ( 
-                
-            //         (strcmp (synctest19, "3131133313131331131") == 0 )
-            //      || (strcmp (synctest19, "3131133313331331131") == 0 )
-            //      || (strcmp (synctest19, "3131133313131331111") == 0 )
-            //      || (strcmp (synctest19, "3131133313331331111") == 0 )   
-                 
-            //     )
-            // {
-            //   //state->carrier = 1;
-            //   state->offset = synctest_pos;
-            //   state->max = ((state->max) + lmax) / 2;
-            //   state->min = ((state->min) + lmin) / 2;
-            //   state->lastsynctype = 28;
-            //   state->last_cc_sync_time = time(NULL);
-              
-            //   // if (opts->payload == 1)
-            //     // fprintf (stderr, "\n +PANDF ");
-            //   // if (opts->payload == 1)
-            //     // fprintf (stderr, " %s \n", synctest19);
-            //   return (28);
-            // }
-            // else if ( 
-
-            //              (strcmp (synctest19, "1313311133131331131") == 0 )
-            //           || (strcmp (synctest19, "1313311133331331131") == 0 )
-            //           || (strcmp (synctest19, "1313311133131331111") == 0 )
-            //           || (strcmp (synctest19, "1313311133331331111") == 0 )   
-                      
-            //         )
-            // {
-            //   // state->carrier = 1;
-            //   state->carrier = 1;
-            //   state->offset = synctest_pos;
-            //   state->max = ((state->max) + lmax) / 2;
-            //   state->min = ((state->min) + lmin) / 2;
-            //   state->lastsynctype = 29;
-            //   state->last_cc_sync_time = time(NULL);
-              
-            //   // if (opts->payload == 1)
-            //     // fprintf (stderr, "\n -PANDF ");
-            //   // if (opts->payload == 1)
-            //     // fprintf (stderr, " %s \n", synctest19);
-            //   return (29);
-            // }
-            // else if (
             if (
-                         (strcmp (synctest10, "3131331131") == 0 ) //this seems to be the most common 'correct' pattern on Type-C
-                      || (strcmp (synctest10, "3331331131") == 0 ) //this one hits on new sync but gives a bad lich code
-                      || (strcmp (synctest10, "3131331111") == 0 )
-                      || (strcmp (synctest10, "3331331111") == 0 )
-                      || (strcmp (synctest10, "3131311131") == 0 ) //First few FSW on NXDN48 Type-C seems to hit this for some reason
+                   (strcmp (synctest10, "3131331131") == 0 ) //this seems to be the most common 'correct' pattern on Type-C
+                || (strcmp (synctest10, "3331331131") == 0 ) //this one hits on new sync but gives a bad lich code
+                || (strcmp (synctest10, "3131331111") == 0 )
+                || (strcmp (synctest10, "3331331111") == 0 )
+                || (strcmp (synctest10, "3131311131") == 0 ) //First few FSW on NXDN48 Type-C seems to hit this for some reason
                       
-                    )
+                )
             {
 
-              // state->carrier = 1;
               state->offset = synctest_pos;
               state->max = ((state->max) + lmax) / 2;
               state->min = ((state->min) + lmin) / 2;
-              // state->last_cc_sync_time = time(NULL);
-
               if (state->lastsynctype == 28) 
               {
                 state->last_cc_sync_time = time(NULL);
-                // if (opts->payload == 1)
-                //   fprintf (stderr, "\n +FSW   ");
-                // if (opts->payload == 1)
-                //   fprintf (stderr, " %s \n", synctest10);
                 return (28);
               }
               state->lastsynctype = 28;
@@ -1549,36 +1288,27 @@ getFrameSync (dsd_opts * opts, dsd_state * state)
 
             else if ( 
                       
-                         (strcmp (synctest10, "1313113313") == 0 )
-                      || (strcmp (synctest10, "1113113313") == 0 )
-                      || (strcmp (synctest10, "1313113333") == 0 )
-                      || (strcmp (synctest10, "1113113333") == 0 )
-                      || (strcmp (synctest10, "1313133313") == 0 ) //
+                       (strcmp (synctest10, "1313113313") == 0 )
+                    || (strcmp (synctest10, "1113113313") == 0 )
+                    || (strcmp (synctest10, "1313113333") == 0 )
+                    || (strcmp (synctest10, "1113113333") == 0 )
+                    || (strcmp (synctest10, "1313133313") == 0 )
                       
                     )
             {
 
-              // state->carrier = 1;
               state->offset = synctest_pos;
               state->max = ((state->max) + lmax) / 2;
               state->min = ((state->min) + lmin) / 2;
-              // state->last_cc_sync_time = time(NULL);
-
               if (state->lastsynctype == 29) 
               {
                 state->last_cc_sync_time = time(NULL);
-                // if (opts->payload == 1)
-                  // fprintf (stderr, "\n -FSW   ");
-                // if (opts->payload == 1)
-                  // fprintf (stderr, " %s \n", synctest10);
                 return (29);
               }
               state->lastsynctype = 29;
             }
           }
 
-          #endif //NXDN Sync Type Selection
-
           //Provoice Conventional -- Some False Positives due to shortened frame sync pattern, so use squelch if possible
           #ifdef PVCONVENTIONAL
           if (opts->frame_provoice == 1)

src/dsd_main.c

@@ -26,6 +26,10 @@
 #include "provoice_const.h"
 #include "git_ver.h"
 
+#ifdef USE_RTLSDR
+#include <rtl-sdr.h>
+#endif
+
 volatile uint8_t exitflag; //fix for issue #136
 
 int pretty_colors()
@@ -467,6 +471,7 @@ noCarrier (dsd_opts * opts, dsd_state * state)
 
   state->m17_dst = 0;
   state->m17_src = 0;
+  state->m17_can = 0;
   memset(state->m17_dst_csd, 0, sizeof(state->m17_dst_csd));
   memset(state->m17_src_csd, 0, sizeof(state->m17_src_csd));
   sprintf (state->m17_dst_str, "%s", "");
@@ -621,7 +626,7 @@ initOpts (dsd_opts * opts)
   opts->dmr_mute_encL = 1;
   opts->dmr_mute_encR = 1;
 
-  opts->monitor_input_audio = 0;
+  opts->monitor_input_audio = 0; //enable with -8
 
   opts->inverted_p2 = 0;
   opts->p2counter = 0;
@@ -715,6 +720,11 @@ initState (dsd_state * state)
   //Upsampled Audio Smoothing
   state->audio_smoothing = 0;
 
+  //analog/raw signal audio buffers
+  state->analog_sample_counter = 0; //when it reaches 960, then dump the raw/analog audio signal and reset
+  memset (state->analog_out, 0, sizeof(state->analog_out) );
+  //
+
   state->audio_out_buf = malloc (sizeof (short) * 1000000);
   state->audio_out_bufR = malloc (sizeof (short) * 1000000);
   memset (state->audio_out_buf, 0, 100 * sizeof (short));
@@ -965,6 +975,7 @@ initState (dsd_state * state)
   //dmr trunking/ncurses stuff 
   state->dmr_rest_channel = -1; //init on -1
   state->dmr_mfid = -1; //
+  state->dmr_cc_lpcn = 0;
 
   //new nxdn stuff
   state->nxdn_part_of_frame = 0;
@@ -1064,6 +1075,7 @@ initState (dsd_state * state)
 
   state->m17_dst = 0;
   state->m17_src = 0;
+  state->m17_can = 0;
   memset(state->m17_dst_csd, 0, sizeof(state->m17_dst_csd));
   memset(state->m17_src_csd, 0, sizeof(state->m17_src_csd));
   sprintf (state->m17_dst_str, "%s", "");
@@ -1129,6 +1141,9 @@ usage ()
   printf ("  -r <files>    Read/Play saved mbe data from file(s)\n");
   printf ("  -g <num>      Audio output gain (default = 0 = auto, disable = -1)\n");
   printf ("  -w <file>     Output synthesized speech to a .wav file, legacy auto modes only.\n");
+  printf ("  -6 <file>     Output raw audio .wav file (48K/1). (WARNING! Large File Sizes 1 Hour ~= 360 MB)\n");
+  printf ("  -8            Enable Experimental Source Audio Monitor (OSS at 48k1 and Pulse Audio)\n");
+  printf ("                 (Its recommended to use Squelch in SDR++ or GQRX, etc, if monitoring mixed analog/digital)\n");
   printf ("  -P            Enable Per Call WAV file saving in XDMA and NXDN decoding classes\n");
   printf ("                 (Per Call can only be used in Ncurses Terminal!)\n");
   printf ("                 (Running in console will use static wav files)\n");
@@ -1145,7 +1160,7 @@ usage ()
   printf ("RTL-SDR options:\n");
   printf (" Usage: rtl:dev:freq:gain:ppm:bw:sq:udp\n");
   printf ("  NOTE: all arguments after rtl are optional now for trunking, but user configuration is recommended\n");
-  printf ("  dev  <num>    RTL-SDR Device Index Number\n");
+  printf ("  dev  <num>    RTL-SDR Device Index Number or 8 Digit Serial Number, no strings! (default 0)\n");
   printf ("  freq <num>    RTL-SDR Frequency (851800000 or 851.8M) \n");
   printf ("  gain <num>    RTL-SDR Device Gain (0-49)(default = 0; Hardware AGC recommended)\n");
   printf ("  ppm  <num>    RTL-SDR PPM Error (default = 0)\n");
@@ -1201,8 +1216,6 @@ usage ()
   printf ("                 Use this feature to allow MAC_SIGNAL even if CRC errors.\n");
   printf ("  -F            Relax DMR RAS/CRC CSBK/DATA Pass/Fail\n");
   printf ("                 Enabling on some systems could lead to bad channel assignments/site data decoding if bad or marginal signal\n");
-  printf ("  -F            Relax NXDN SACCH/FACCH/CAC/F2U CRC Pass/Fail\n");
-  printf ("                 Not recommended on NXDN, but can be bypassed if desired.\n");
   printf ("\n");
   printf ("  -b <dec>      Manually Enter Basic Privacy Key (Decimal Value of Key Number)\n");
   printf ("                 (NOTE: This used to be the 'K' option! \n");
@@ -1230,9 +1243,6 @@ usage ()
   printf ("                 \n");
   printf ("  -3            Disable DMR Late Entry Encryption Identifiers (VC6 Single Burst) \n");
   printf ("                  Note: Disable this if false positives on Voice ENC occur. \n");
-  // printf ("  -3            Enable DMR Late Entry Encryption Identifiers (VC6 Single Burst) \n");
-  // printf ("                  Note: This is experimental and may produce false positives depending on system type, notably TXI. \n");
-  // printf ("                  Use -0 or -4 options above instead if needed. \n");
   printf ("\n");
   printf (" Trunking Options:\n");
   printf ("  -C <file>     Import Channel to Frequency Map (channum, freq) from csv file. (Capital C)                   \n");
@@ -1254,6 +1264,7 @@ usage ()
   printf ("                 P25 - 7000-12000; P25 (QPSK) - 12000; NXDN48 - 7000; NXDN96: 9000; DMR - 7000; EDACS/PV - 12500;\n");
   printf ("                 May vary based on system stregnth, etc.\n");
   printf ("  -t <secs>     Set Trunking or Fast Scan VC/sync loss hangtime in seconds. (default = 1 second)\n");
+  printf ("  -9            Force Enable EDACS Standard or Networked Mode on Systems without a netcmd (temp fix) \n");
   printf ("\n");
   printf (" Trunking Example TCP: dsd-fme -fs -i tcp -U 4532 -T -C dmr_t3_chan.csv -G group.csv -N 2> log.ans\n");
   printf (" Trunking Example RTL: dsd-fme -fs -i rtl:0:450M:26:-2:8 -T -C connect_plus_chan.csv -G group.csv -N 2> log.ans\n");
@@ -1300,6 +1311,12 @@ if (opts->audio_in_type == 1)
 
     open_rtlsdr_stream(opts);
     opts->rtl_started = 1; //set here so ncurses terminal doesn't attempt to open it again
+    #ifdef __arm__
+    fprintf (stderr, "WARNING: RMS Function is Disabled on ARM Devices (Raspberry Pi) due to High CPU use. \n");
+    fprintf (stderr, "RMS/Squelch Functionality for NXDN, dPMR, EDACS Analog, M17 and Raw Audio Monitor are unavailable and these modes will not function properly. \n");
+    if (opts->monitor_input_audio == 1) opts->monitor_input_audio = 0;
+    opts->rtl_squelch_level = 0;
+    #endif
   }
 #endif
 
@@ -1319,6 +1336,13 @@ if (opts->audio_out_type == 0)
   openPulseOutput(opts);
 }
 
+#ifdef AERO_BUILD
+//TODO: More Random Cygwin Related M17 Bugs to sort out
+if(opts->frame_m17 == 1 && opts->audio_in_type != 0)
+  for (int i = 0; i < 960; i++) getSymbol(opts, state, 1); //I think this is actually just framesync being a pain
+#endif
+
+
 	while (1)
     {
 
@@ -1450,12 +1474,16 @@ main (int argc, char **argv)
   }
 
   #ifdef AERO_BUILD
-  fprintf (stderr, "Build Version: v2.1b (20230714)\n");
+  fprintf (stderr, "Build Version: v2.1b (20230915)\n");
   #else
   fprintf (stderr, "Build Version:  %s \n", GIT_TAG);
   #endif
   fprintf (stderr,"MBElib Version: %s\n", versionstr);
 
+  #ifdef USE_CODEC2
+  fprintf (stderr,"CODEC2 Support Enabled\n");
+  #endif
+
   initOpts (&opts);
   initState (&state);
 
@@ -1463,7 +1491,7 @@ main (int argc, char **argv)
 
   exitflag = 0;
 
-  while ((c = getopt (argc, argv, "haepPqs:t:v:z:i:o:d:c:g:nw:B:C:R:f:m:u:x:A:S:M:G:D:L:VU:YK:b:H:X:NQ:WrlZTF01:2:345:6:7:89:Ek:")) != -1)
+  while ((c = getopt (argc, argv, "haepPqs:t:v:z:i:o:d:c:g:nw:B:C:R:f:m:u:x:A:S:M:G:D:L:VU:YK:b:H:X:NQ:WrlZTF01:2:345:6:7:89Ek:")) != -1)
     {
       opterr = 0;
       switch (c)
@@ -1485,6 +1513,17 @@ main (int argc, char **argv)
         //NOTE: The 'K' option for single BP key has been swapped to 'b'
         //'K' is now used for hexidecimal key.csv imports
 
+        case '9': //This is a temporary fix for RR issue until a permanent fix can be found
+          state.ea_mode = 0;
+          fprintf (stderr,"Force Enabling EDACS Standard/Networked Mode Mode\n");
+          break;
+
+        //experimental audio monitoring
+        case '8':
+          opts.monitor_input_audio = 1;
+          fprintf (stderr,"Experimental Raw Analog Source Monitoring Enabled\n");
+          break;
+
         //rc4 enforcement on DMR (due to missing the PI header)
         case '0':
           state.M = 0x21;
@@ -1806,6 +1845,13 @@ main (int argc, char **argv)
           openWavOutFile (&opts, &state);
           break;
 
+        case '6':
+          strncpy(opts.wav_out_file_raw, optarg, 1023);
+          opts.wav_out_file_raw[1023] = '\0';
+          fprintf (stderr,"Writing raw audio to file %s\n", opts.wav_out_file_raw);
+          openWavOutFileRaw (&opts, &state);
+          break;
+
         case 'f':
           if (optarg[0] == 'a')
             {
@@ -1899,6 +1945,7 @@ main (int argc, char **argv)
               sprintf (opts.output_name, "EDACS/PV");
               fprintf (stderr,"Setting symbol rate to 9600 / second\n");
               fprintf (stderr,"Decoding only ProVoice frames.\n");
+              fprintf (stderr,"EDACS Analog Voice Channels are Experimental.\n");
               //rtl specific tweaks
               opts.rtl_bandwidth = 24;
               // opts.rtl_gain_value = 36;
@@ -2394,6 +2441,10 @@ main (int argc, char **argv)
     if((strncmp(opts.audio_in_dev, "rtl", 3) == 0)) //rtl dongle input
     {
       uint8_t rtl_ok = 0;
+      //use to list out all detected RTL dongles
+      char vendor[256], product[256], serial[256], userdev[256];
+      int device_count = 0;
+      
       #ifdef USE_RTLSDR
       fprintf (stderr, "RTL Input: ");
       char * curr; 
@@ -2442,6 +2493,34 @@ main (int argc, char **argv)
       else goto RTLEND;
 
       RTLEND:
+
+      device_count = rtlsdr_get_device_count();
+      if (!device_count)
+      {
+        fprintf(stderr, "No supported devices found.\n");
+        exitflag = 1;
+      }
+      else fprintf(stderr, "Found %d device(s):\n", device_count);
+      for (int i = 0; i < device_count; i++)
+      {
+        rtlsdr_get_device_usb_strings(i, vendor, product, serial);
+        fprintf(stderr, "  %d:  %s, %s, SN: %s\n", i, vendor, product, serial);
+
+        sprintf (userdev, "%08d", opts.rtl_dev_index);
+
+        //check by index first, then by serial
+        if (opts.rtl_dev_index == i)
+        {
+          fprintf (stderr, "Selected Device #%d with Serial Number: %s \n", i, serial);
+        }
+        else if (strcmp (userdev, serial) == 0)
+        {
+          fprintf (stderr, "Selected Device #%d with Serial Number: %s \n", i, serial);
+          opts.rtl_dev_index = i;
+        }
+        
+      }
+
       fprintf (stderr, "Dev %d ", opts.rtl_dev_index);
       fprintf (stderr, "Freq %d ", opts.rtlsdr_center_freq);
       fprintf (stderr, "Gain %d ", opts.rtl_gain_value);
@@ -2530,9 +2609,15 @@ main (int argc, char **argv)
       opts.audio_in_type = 5; //5 will become OSS input type
     }
 
-    //Codec2 only running at 8k output currently, need to match for OSS
+    //OSS cannot open different rate/channel configs on /dev/dsp on real hardware and in Cygwin
+    //So, in Aero builds, we need to keep the rate the same but upscale Codec2
+    //padsp opens a virtual output, so mixing and matching rates/channels is possible there
+    #ifdef AERO_BUILD
+    // speed = 48000;
+    #else
     if (opts.frame_m17 == 1)
       speed = 8000;
+    #endif
 
     if((strncmp(opts.audio_out_dev, "/dev/audio", 10) == 0))
     {

src/dsd_mbe.c

@@ -190,10 +190,10 @@ processMbeFrame (dsd_opts * opts, dsd_state * state, char imbe_fr[8][23], char a
   int x;
 
   //these conditions should ensure no clashing with the BP/HBP/Scrambler key loading machanisms already coded in
-  if (state->currentslot == 0 && state->payload_algid != 0 && state->payload_algid != 0x80 && state->payload_keyid != 0 && state->keyloader == 1)
+  if (state->currentslot == 0 && state->payload_algid != 0 && state->payload_algid != 0x80 && state->keyloader == 1)
     keyring (opts, state);
 
-  if (state->currentslot == 1 && state->payload_algidR != 0 && state->payload_algidR != 0x80 && state->payload_keyidR != 0 && state->keyloader == 1)
+  if (state->currentslot == 1 && state->payload_algidR != 0 && state->payload_algidR != 0x80 && state->keyloader == 1)
     keyring (opts, state);
 
   //24-bit TG to 16-bit hash
@@ -216,6 +216,7 @@ processMbeFrame (dsd_opts * opts, dsd_state * state, char imbe_fr[8][23], char a
 
   //set playback mode for this frame
   char mode[8];
+  sprintf (mode, "%s", "");
 
   //if we are using allow/whitelist mode, then write 'B' to mode for block
   //comparison below will look for an 'A' to write to mode if it is allowed
@@ -231,6 +232,7 @@ processMbeFrame (dsd_opts * opts, dsd_state * state, char imbe_fr[8][23], char a
     if (state->group_array[i].groupNumber == groupNumber)
     {
       strcpy (mode, state->group_array[i].groupMode);
+      break;
     }
   }
 
@@ -582,7 +584,7 @@ processMbeFrame (dsd_opts * opts, dsd_state * state, char imbe_fr[8][23], char a
         state->dropL += 7;
 
         short z = 0;
-        for (short p = 0; p < 6; p++)
+        for (short p = 0; p <= 6; p++)
         {
           //convert bytes back to bits and load into ambe_d array.
           short b = 0; //reset b to use again
@@ -660,7 +662,7 @@ processMbeFrame (dsd_opts * opts, dsd_state * state, char imbe_fr[8][23], char a
         state->dropL += 7;
 
         short z = 0;
-        for (short p = 0; p < 6; p++)
+        for (short p = 0; p <= 6; p++)
         {
           //convert bytes back to bits and load into ambe_d array.
           short b = 0; //reset b to use again
@@ -867,7 +869,7 @@ processMbeFrame (dsd_opts * opts, dsd_state * state, char imbe_fr[8][23], char a
         state->dropR += 7;
 
         short z = 0;
-        for (short p = 0; p < 6; p++)
+        for (short p = 0; p <= 6; p++)
         {
           //convert bytes back to bits and load into ambe_d array.
           short b = 0; //reset b to use again
@@ -945,7 +947,7 @@ processMbeFrame (dsd_opts * opts, dsd_state * state, char imbe_fr[8][23], char a
         state->dropR += 7;
 
         short z = 0;
-        for (short p = 0; p < 6; p++)
+        for (short p = 0; p <= 6; p++)
         {
           //convert bytes back to bits and load into ambe_d array.
           short b = 0; //reset b to use again

src/dsd_ncurses.c

@@ -12,6 +12,12 @@
 #include "dsd.h"
 #include "git_ver.h"
 
+#ifdef USE_RTLSDR
+#include <rtl-sdr.h>
+//use to list out all detected RTL dongles
+char vendor[256], product[256], serial[256], userdev[256];
+int device_count = 0;
+#endif
 
 #define BSIZE 999
 #define UDP_BUFLEN 5 //maximum UDP buffer length
@@ -248,7 +254,11 @@ void beeper (dsd_opts * opts, dsd_state * state, int type)
 #endif
 
 char * getDateN(void) {
-  char datename[80]; //bug in 32-bit Ubuntu when using date in filename, date is garbage text
+  #ifdef AERO_BUILD
+  char datename[80];
+  #else
+  char datename[99];
+  #endif
   char * curr2;
   struct tm * to;
   time_t t;
@@ -274,9 +284,9 @@ char * getTimeN(void) //get pretty hh:mm:ss timestamp
 
   return curr;
 }
-
+//this version is broken now in Cygwin with the 80 value, reverted back
 char * getDateC(time_t t) {
-  char datename[99]; //Ubuntu 32-bit, use 80; everything else, use 99
+  char datename[99];
   char * curr2;
   struct tm * to;
 
@@ -665,7 +675,7 @@ void ncursesMenu (dsd_opts * opts, dsd_state * state)
 
           entry_win = newwin(6, WIDTH+6, starty+10, startx+10);
           box (entry_win, 0, 0);
-          mvwprintw(entry_win, 2, 2, " Enter RTL Device Index Number");
+          mvwprintw(entry_win, 2, 2, " RTL Device Index or Serial Number:");
           mvwprintw(entry_win, 3, 3, " ");
           echo();
           refresh();
@@ -674,7 +684,7 @@ void ncursesMenu (dsd_opts * opts, dsd_state * state)
 
           entry_win = newwin(6, WIDTH+6, starty+10, startx+10);
           box (entry_win, 0, 0);
-          mvwprintw(entry_win, 2, 2, " Enter RTL Device PPM Error");
+          mvwprintw(entry_win, 2, 2, " RTL Device PPM Error:");
           mvwprintw(entry_win, 3, 3, " ");
           echo();
           refresh();
@@ -683,7 +693,7 @@ void ncursesMenu (dsd_opts * opts, dsd_state * state)
 
           entry_win = newwin(6, WIDTH+18, starty+10, startx+10);
           box (entry_win, 0, 0);
-          mvwprintw(entry_win, 2, 2, " Enter Frequency in Hz (851.8 MHz is 851800000 Hz) ");
+          mvwprintw(entry_win, 2, 2, " Frequency in Hz (851.8 MHz is 851800000 Hz): ");
           mvwprintw(entry_win, 3, 3, " ");
           echo();
           refresh();
@@ -692,7 +702,7 @@ void ncursesMenu (dsd_opts * opts, dsd_state * state)
 
           entry_win = newwin(6, WIDTH+18, starty+10, startx+10);
           box (entry_win, 0, 0);
-          mvwprintw(entry_win, 2, 2, " Enter BW (8, 12, 24, 48)(12 Recommended)");
+          mvwprintw(entry_win, 2, 2, " BW (8, 12, 24, 48)(12 Recommended): ");
           mvwprintw(entry_win, 3, 3, " ");
           echo();
           refresh();
@@ -701,7 +711,7 @@ void ncursesMenu (dsd_opts * opts, dsd_state * state)
 
           entry_win = newwin(6, WIDTH+18, starty+10, startx+10);
           box (entry_win, 0, 0);
-          mvwprintw(entry_win, 2, 2, " Enter RTL Gain Value (0-49) (0 = AGC)");
+          mvwprintw(entry_win, 2, 2, " RTL Gain Value (0-49) (0 = AGC): ");
           mvwprintw(entry_win, 3, 3, " ");
           echo();
           refresh();
@@ -710,7 +720,7 @@ void ncursesMenu (dsd_opts * opts, dsd_state * state)
 
           entry_win = newwin(6, WIDTH+18, starty+10, startx+10);
           box (entry_win, 0, 0);
-          mvwprintw(entry_win, 2, 2, " Enter RTL UDP Port - Optional (Default = 0)");
+          mvwprintw(entry_win, 2, 2, " RTL UDP Port - Legacy/Optional (Default = 0): ");
           mvwprintw(entry_win, 3, 3, " ");
           echo();
           refresh();
@@ -719,18 +729,47 @@ void ncursesMenu (dsd_opts * opts, dsd_state * state)
 
           entry_win = newwin(8, WIDTH+22, starty+10, startx+10);
           box (entry_win, 0, 0);
-          mvwprintw(entry_win, 2, 2, " Enter RTL RMS Squelch Level (NXDN/dPMR only)");
+          mvwprintw(entry_win, 2, 2, " RTL RMS Squelch Level (NXDN/dPMR/Analog/Raw only): ");
           mvwprintw(entry_win, 3, 3, " ");
           echo();
           refresh();
           wscanw(entry_win, "%d", &opts->rtl_squelch_level);
           noecho();
 
+          //use to list out all detected RTL dongles
+          device_count = rtlsdr_get_device_count();
+          if (!device_count)
+          {
+            fprintf(stderr, "No supported devices found.\n");
+          }
+          else fprintf(stderr, "Found %d device(s):\n", device_count);
+          for (int i = 0; i < device_count; i++)
+          {
+            rtlsdr_get_device_usb_strings(i, vendor, product, serial);
+            fprintf(stderr, "  %d:  %s, %s, SN: %s\n", i, vendor, product, serial);
+
+            sprintf (userdev, "%08d", opts->rtl_dev_index);
+
+            //check by index first, then by serial
+            if (opts->rtl_dev_index == i)
+            {
+              fprintf (stderr, "Selected Device #%d with Serial Number: %s \n", i, serial);
+              break;
+            }
+            else if (strcmp (userdev, serial) == 0)
+            {
+              fprintf (stderr, "Selected Device #%d with Serial Number: %s \n", i, serial);
+              opts->rtl_dev_index = i;
+              break;
+            }
+            
+          }
+
           entry_win = newwin(17, WIDTH+20, starty+10, startx+10);
           box (entry_win, 0, 0);
           mvwprintw(entry_win, 2, 2, " Starting RTL Input. Cannot Release/Stop Until Exit.");
           mvwprintw(entry_win, 4, 2, " RTL Frequency: %d Hz", opts->rtlsdr_center_freq);
-          mvwprintw(entry_win, 5, 2, " RTL Device Index Number: %d", opts->rtl_dev_index);
+          mvwprintw(entry_win, 5, 2, " RTL Device Index Number: %d; SN:%s", opts->rtl_dev_index, serial);
           mvwprintw(entry_win, 6, 2, " RTL Device Bandwidth: %d kHz", opts->rtl_bandwidth);
           mvwprintw(entry_win, 7, 2, " RTL Device Gain: %d", opts->rtl_gain_value);
           mvwprintw(entry_win, 8, 2, " RTL Device UDP Port: %d", opts->rtl_udp_port);
@@ -2225,7 +2264,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
   if (opts->ncurses_compact == 1)
   {
     printw ("------------------------------------------------------------------------------\n");
-    printw ("| Digital Speech Decoder: Florida Man Edition - Aero %s \n", "v2.1b (20230714)");
+    printw ("| Digital Speech Decoder: Florida Man Edition - Aero %s \n", "v2.1b (20230915)");
     printw ("------------------------------------------------------------------------------\n"); 
   }
 #elif LIMAZULUTWEAKS
@@ -2235,13 +2274,6 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
     printw ("| Digital Speech Decoder: LimaZulu Edition VI: Return of the Zulu \n");
     printw ("------------------------------------------------------------------------------\n");
   }
-#elif ZDEV_BUILD
-  if (opts->ncurses_compact == 1)
-  {
-    printw ("------------------------------------------------------------------------------\n");
-    printw ("| Digital Speech Decoder: Florida Man Edition - zDEV %s \n", GIT_TAG);
-    printw ("------------------------------------------------------------------------------\n");
-  }
 #else
   if (opts->ncurses_compact == 1)
   {
@@ -2258,13 +2290,13 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
       printw("%s", FM_bannerN[i]);
       if (i == 1) printw (" ESC to Menu");
       if (i == 2) printw (" 'q' to Quit ");
-      if (i == 4) printw (" MBElib %s", versionstr);
+      if (i == 4 && opts->frame_m17 == 0) printw (" MBElib %s", versionstr);
+      #ifdef USE_CODEC2
+      if (i == 4 && opts->frame_m17 == 1) printw (" CODEC2");
+      #endif
       #ifdef AERO_BUILD
       if (i == 5) printw (" %s ", "Aero Build");
-      if (i == 6) printw (" v2.1b (20230714) \n");
-      #elif ZDEV_BUILD
-      if (i == 5) printw (" %s ", "zDEV Build");
-      if (i == 6) printw (" %s \n", GIT_TAG);
+      if (i == 6) printw (" v2.1b (20230915) \n");
       #else 
       if (i == 5) printw (" %s ", "Main Build");
       if (i == 6) printw (" %s \n", GIT_TAG);
@@ -2315,7 +2347,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
       printw (" Gain: %idB;", opts->rtl_gain_value);
     printw (" PPM: %i;", opts->rtlsdr_ppm_error);
     printw (" SQ: %i;", opts->rtl_squelch_level);
-    printw (" RMS: %04i;", opts->rtl_rms);
+    printw (" RMS: %04li;", opts->rtl_rms);
     printw (" BW: %i kHz;", opts->rtl_bandwidth);
     printw (" FRQ: %i;", opts->rtlsdr_center_freq); 
     if (opts->rtl_udp_port != 0) printw ("\n| External Tuning on UDP Port: %i", opts->rtl_udp_port);
@@ -2327,23 +2359,30 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
     if (state->audio_smoothing == 1) printw (" - Smoothing On");
     printw (" \n");
   }
+  if ( opts->audio_out_type == 0 && (opts->frame_provoice == 1 || opts->monitor_input_audio == 1) )
+  {
+    printw ("| Pulse Audio Output: %i kHz; %i Ch; RMS: %04ld Analog", opts->pulse_raw_rate_out/1000, opts->pulse_raw_out_channels, opts->rtl_rms);
+    printw (" \n");
+  }
   if (opts->audio_out_type == 5)
   {
     printw ("| OSS Audio Output: [%2i] kHz [1] Channel", SAMPLE_RATE_OUT/1000);
+    if (opts->frame_provoice == 1 || opts->monitor_input_audio == 1)
+      printw (" - Analog RMS: %04ld ", opts->rtl_rms);
     if (state->audio_smoothing == 1) printw (" - Smoothing On");
     printw (" \n");
   }
   if (opts->monitor_input_audio == 1)
   {
-    printw ("| Monitoring Source Audio when Carrier Present and No Sync Detected\n");
+    printw ("| Monitoring Source Audio when Carrier Present and No Sync Detected (WIP)\n");
   }
   if (opts->mbe_out_dir[0] != 0 && opts->dmr_stereo == 0)
   {
     printw ("| Writing MBE data files to directory %s\n", opts->mbe_out_dir);
   }
-  if (opts->wav_out_file_raw[0] != 0 && opts->audio_in_type == 0)
+  if (opts->wav_out_raw)
   {
-    printw ("| Appending Raw Sig Audio WAV to file %s\n", opts->wav_out_file_raw);
+    printw ("| Raw Audio Output: %s\n", opts->wav_out_file_raw);
   }
   if (opts->symbol_out_file[0] != 0 && opts->symbol_out == 1)
   {
@@ -2481,14 +2520,13 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
   {
 
     printw ("| ");
-    printw ("M17 - ");
+    printw ("M17: ");
 
     //insert data type and frame information
     if (state->m17_str_dt == 0) printw("Reserved");
     if (state->m17_str_dt == 1) printw("Data ");
     if (state->m17_str_dt == 2) printw("Voice (3200) ");
     if (state->m17_str_dt == 3) printw("Voice (1600) + Data");
-    printw (" ");
 
     printw ("\n");
     printw ("| ");
@@ -2499,11 +2537,7 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
     else if (state->m17_dst != 0 && state->m17_dst >= 0xEE6B28000000)
       printw("RESERVED (%012llx) ", state->m17_dst);
     else
-    {
-      // for (i = 0; i < 9; i++)
-      //   printw ("%c", state->m17_dst_csd[i]);
       printw("%s", state->m17_dst_str);
-    }
     
     printw ("\n");
     printw ("| ");
@@ -2512,23 +2546,25 @@ ncursesPrinter (dsd_opts * opts, dsd_state * state)
     if (state->m17_src != 0 && state->m17_src >= 0xEE6B28000000)
       printw("RESERVED (%012llx)", state->m17_src);
     else
-    {
-      // for (i = 0; i < 9; i++)
-      //   printw ("%c", state->m17_src_csd[i]);
       printw("%s", state->m17_src_str);
-    }
+
     
     printw ("\n");
     printw ("| ");
 
+    printw ("CAN: %02d ", state->m17_can);
+
+    printw ("\n");
+    printw ("| ");
+
 
     //fill in any extra info, like Meta (IV, etc)
-    if (state->m17_enc == 2)
+    if (state->m17_enc == 1)
     {
       printw (" Scrambler - Type: %d", state->m17_enc_st);
     }
 
-    if (state->m17_enc == 1)
+    if (state->m17_enc == 2)
     {
       printw (" AES-CTR - IV: ");
       //display packed meta as IV

src/dsd_symbol.c

@@ -17,6 +17,29 @@
 
 #include "dsd.h"
 
+long int raw_rms(int16_t *samples, int len, int step) //use samplespersymbol as len
+{
+  
+  int i;
+  long int rms;
+  long p, t, s;
+  double dc, err;
+
+  p = t = 0L;
+  for (i=0; i<len; i+=step) {
+    s = (long)samples[i];
+    t += s;
+    p += s * s;
+  }
+  /* correct for dc offset in squares */
+  dc = (double)(t*step) / (double)len;
+  err = t * 2 * dc - dc * dc * len;
+
+  rms = (long int)sqrt((p-err) / len);
+  if (rms < 0) rms = 150;
+  return rms;
+}
+
 int
 getSymbol (dsd_opts * opts, dsd_state * state, int have_sync)
 {
@@ -129,14 +152,8 @@ getSymbol (dsd_opts * opts, dsd_state * state, int have_sync)
       else if (opts->audio_in_type == 3)
       {
 #ifdef USE_RTLSDR
-        // TODO: need to read demodulated stream here
-        // get_rtlsdr_sample(&sample);
+        // Read demodulated stream here
         get_rtlsdr_sample(&sample, opts, state);
-        if (opts->monitor_input_audio == 1 && state->lastsynctype == -1 && sample < 32767 && sample > -32767)
-        {
-          state->pulse_raw_out_buffer = sample; //steal raw out buffer sample here?
-          pa_simple_write(opts->pulse_raw_dev_out, (void*)&state->pulse_raw_out_buffer, 2, NULL);
-        }
         opts->rtl_rms = rtl_return_rms();
 
 #endif
@@ -247,6 +264,80 @@ getSymbol (dsd_opts * opts, dsd_state * state, int have_sync)
         
       }
 
+      //Source Audio Monitoring
+      if (have_sync == 0)
+      {
+        //sanity check to prevent an overflow
+        if (state->analog_sample_counter > 959)
+          state->analog_sample_counter = 959;
+
+        state->analog_out[state->analog_sample_counter++] = sample;    
+
+        if (state->analog_sample_counter == 960)
+        {
+          //get an rms value if not using the rtl built in version
+          if (opts->audio_in_type != 3 && opts->monitor_input_audio == 1)
+            opts->rtl_rms = raw_rms(state->analog_out, 960, 1);
+
+          //debug
+          // opts->rtl_rms = 101;
+
+          //make it a little quieter
+          // for (int x = 0; x < 960; x++)
+          //   state->analog_out[x] /= 4;
+
+          //seems to be working now, but RMS values are lower on actual analog signal than on no signal but noise
+          if ( (opts->rtl_rms > opts->rtl_squelch_level) && (opts->monitor_input_audio == 1) )
+          {
+            if (opts->audio_out_type == 0)
+              pa_simple_write(opts->pulse_raw_dev_out, state->analog_out, 960*2, NULL);
+
+            //NOTE: Worked okay earlier in Cygwin, so should be fine
+            if (opts->audio_out_type == 5)
+              write (opts->audio_out_fd, state->analog_out, 960*2);
+
+            //test hold on scan/trunking
+            state->last_cc_sync_time = time(NULL);
+            state->last_vc_sync_time = time(NULL);
+          }
+
+          //raw wav file saving -- only write when not NXDN, dPMR, or M17 due to noise that can cause tons of false positives when no sync
+          if (opts->wav_out_raw != NULL && opts->frame_nxdn48 == 0 && opts->frame_nxdn96 == 0 && opts->frame_dpmr == 0 && opts->frame_m17 == 0)
+          {
+            sf_write_short(opts->wav_out_raw, state->analog_out, 960);
+            sf_write_sync (opts->wav_out_raw);
+          }
+
+          memset (state->analog_out, 0, sizeof(state->analog_out));
+          state->analog_sample_counter = 0;
+        }
+
+      }
+
+      if (have_sync == 1)
+      {
+        //sanity check to prevent an overflow
+        if (state->analog_sample_counter > 959)
+          state->analog_sample_counter = 959;
+
+        state->analog_out[state->analog_sample_counter++] = sample; 
+
+        if (state->analog_sample_counter == 960)
+        {
+          //raw wav file saving -- file size on this blimps pretty fast 1 min ~= 6 MB;  1 hour ~= 360 MB;
+          if (opts->wav_out_raw != NULL)
+          {
+            sf_write_short(opts->wav_out_raw, state->analog_out, 960);
+            sf_write_sync (opts->wav_out_raw);
+          }
+
+          //zero out and reset counter
+          memset (state->analog_out, 0, sizeof(state->analog_out));
+          state->analog_sample_counter = 0;
+        }
+
+      }
+
       if (opts->use_cosine_filter)
         {
           if ( (state->lastsynctype >= 10 && state->lastsynctype <= 13) || state->lastsynctype == 32 || state->lastsynctype == 33 

src/edacs-fme.c

@@ -14,12 +14,16 @@
  * 1994-7
  *
  * LWVMOBILE
- * 2022-10 Version EDACS-FM Florida Man Edition
+ * 2023-08 Version EDACS-FM Florida Man Edition
  *-----------------------------------------------------------------------------*/
 #include "dsd.h"
 
 char * getDateE(void) {
-  char datename[99]; //might honestly just need a much smaller size, and not a larger one
+  #ifdef AERO_BUILD
+  char datename[80];
+  #else
+  char datename[99];
+  #endif
   char * curr2;
   struct tm * to;
   time_t t;
@@ -45,6 +49,210 @@ char * getTimeE(void) //get pretty hh:mm:ss timestamp
   return curr;
 }
 
+void openWavOutFile48k (dsd_opts * opts, dsd_state * state)
+{
+
+  SF_INFO info;
+  info.samplerate = 48000; //48k for analog output (has to match input)
+  info.channels = 1;
+  info.format = SF_FORMAT_WAV | SF_FORMAT_PCM_16 | SF_ENDIAN_LITTLE;
+  opts->wav_out_f = sf_open (opts->wav_out_file, SFM_RDWR, &info);
+
+  if (opts->wav_out_f == NULL)
+  {
+    fprintf (stderr,"Error - could not open wav output file %s\n", opts->wav_out_file);
+    return;
+  }
+}
+
+//generic rms type function
+long int gen_rms(short *samples, int len, int step)
+{
+  
+  int i;
+  long int rms;
+  long p, t, s;
+  double dc, err;
+
+  p = t = 0L;
+  for (i=0; i<len; i+=step) {
+    s = (long)samples[i];
+    t += s;
+    p += s * s;
+  }
+  /* correct for dc offset in squares */
+  dc = (double)(t*step) / (double)len;
+  err = t * 2 * dc - dc * dc * len;
+
+  rms = (long int)sqrt((p-err) / len);
+  //make sure it doesnt' randomly feed us a large negative value (overflow?)
+  if (rms < 0) rms = 150; //could also consider returning 0 and making it return the last known good value instead
+  return rms;
+}
+
+//listening to and playing back analog audio
+void edacs_analog(dsd_opts * opts, dsd_state * state, int afs, unsigned char lcn)
+{
+
+  int i;
+  short analog1[960];
+  short analog2[960];
+  short analog3[960];
+  short sample = 0; 
+
+  state->last_cc_sync_time = time(NULL);
+  state->last_vc_sync_time = time(NULL);
+
+  memset (analog1, 0, sizeof(analog1));
+  memset (analog2, 0, sizeof(analog2));
+  memset (analog3, 0, sizeof(analog3));
+
+  long int rms = opts->rtl_squelch_level + 1; //one more for the initial loop phase
+  long int sql = opts->rtl_squelch_level;
+
+  fprintf (stderr, "\n");
+
+  while (rms > sql) //!exitflag && -- no exitflag on this version
+  { 
+    //this will only work on 48k/1 short output
+    if (opts->audio_in_type == 0)
+    {
+      for (i = 0; i < 960; i++)
+      {
+        pa_simple_read(opts->pulse_digi_dev_in, &sample, 2, NULL );
+        analog1[i] = sample;
+      }
+
+      for (i = 0; i < 960; i++)
+      {
+        pa_simple_read(opts->pulse_digi_dev_in, &sample, 2, NULL );
+        analog2[i] = sample;
+      }
+
+      for (i = 0; i < 960; i++)
+      {
+        pa_simple_read(opts->pulse_digi_dev_in, &sample, 2, NULL );
+        analog3[i] = sample;
+      }
+      //this rms will only work properly (for now) with squelch enabled in SDR++ or other
+      rms = gen_rms(analog3, 960, 1);
+    }
+
+    //TCP Input -- TODO: Error Handling if connection drops
+    if (opts->audio_in_type == 8)
+    {
+      for (i = 0; i < 960; i++)
+      {
+        sf_read_short(opts->tcp_file_in, &sample, 1);
+        analog1[i] = sample;
+      }
+
+      for (i = 0; i < 960; i++)
+      {
+        sf_read_short(opts->tcp_file_in, &sample, 1);
+        analog2[i] = sample;
+      }
+
+      for (i = 0; i < 960; i++)
+      {
+        sf_read_short(opts->tcp_file_in, &sample, 1);
+        analog3[i] = sample;
+      }
+      //this rms will only work properly (for now) with squelch enabled in SDR++
+      rms = gen_rms(analog3, 960, 1);
+    }
+
+    //RTL Input
+    #ifdef USE_RTLSDR
+    if (opts->audio_in_type == 3)
+    {
+      for (i = 0; i < 960; i++)
+      {
+        get_rtlsdr_sample(&sample, opts, state);
+        analog1[i] = sample;
+      }
+
+      for (i = 0; i < 960; i++)
+      {
+        get_rtlsdr_sample(&sample, opts, state);
+        analog2[i] = sample;
+      }
+
+      for (i = 0; i < 960; i++)
+      {
+        get_rtlsdr_sample(&sample, opts, state);
+        analog3[i] = sample;
+      }
+      //the rtl rms value works properly without needing a 'hard' squelch value
+      rms = rtl_return_rms();
+    }
+    #endif
+
+    if (opts->audio_out_type == 0)
+    {
+      pa_simple_write(opts->pulse_raw_dev_out, analog1, 960*2, NULL);
+      pa_simple_write(opts->pulse_raw_dev_out, analog2, 960*2, NULL);
+      pa_simple_write(opts->pulse_raw_dev_out, analog3, 960*2, NULL);
+    }
+
+    if (opts->audio_out_type == 5)
+    {
+      write (opts->audio_out_fd, analog1, 960*2);
+      write (opts->audio_out_fd, analog2, 960*2);
+      write (opts->audio_out_fd, analog3, 960*2);
+    }
+
+    opts->rtl_rms = rms;
+
+
+    printFrameSync (opts, state, " EDACS", 0, "A");
+
+    if (rms < sql) fprintf (stderr, "%s", KRED);
+    else fprintf (stderr, "%s", KGRN);
+
+    fprintf (stderr, " Analog RMS: %04ld SQL: %ld", rms, sql);
+    if (afs != 0)
+      fprintf (stderr, " AFS [0x%03X] [%02d-%03d] LCN [%02d]", afs, afs >> 7, afs & 0x7F, lcn);
+
+    fprintf (stderr, "%s", KNRM);
+
+    //Update Ncurses Terminal
+    if (opts->use_ncurses_terminal == 1)
+      ncursesPrinter(opts, state);
+
+    //WIP: Write Analog Samples to wav file, easy enough, 
+    //but needs wav to be opened as 48k, or downsampled
+    //working on 48k version of openWavOutFile
+    if (opts->wav_out_f != NULL)
+    {
+      sf_write_short(opts->wav_out_f, analog1, 960);
+      sf_write_short(opts->wav_out_f, analog2, 960);
+      sf_write_short(opts->wav_out_f, analog3, 960);
+    }
+
+    //digitize analog samples for a dotting sequence check
+    unsigned long long int sr = 0;
+    for (i = 0; i < 960; i+=5) //Samples Per Symbol is 5, so incrememnt every 5
+    {
+      sr = sr << 1;
+      sr += digitize (opts, state, (int)analog1[i]);
+    }
+
+    //debug
+    // fprintf (stderr, " SR: %016llX", sr);
+
+    if (sr == 0xAAAAAAAAAAAAAAAA || sr == 0x5555555555555555)
+    {
+      fprintf (stderr, " EDACS DOTTING SEQUENCE: ");
+      rms = 0; //break while loop by dropping rms value
+      fprintf (stderr, "\n");
+    }
+
+    if (rms > sql) fprintf (stderr, "\n");
+    
+  }
+}
+
 void edacs(dsd_opts * opts, dsd_state * state)
 {
   //changed to ulli here for 32-bit cygwin (not sure if was an issue, but playing it safe)
@@ -64,7 +272,6 @@ void edacs(dsd_opts * opts, dsd_state * state)
   unsigned char command = 0xFF;
   unsigned char mt1 = 0x1F;
   unsigned char mt2 = 0xF;
-  unsigned char mta = 0;
   unsigned char lcn = 0;
 
   //commands; may not use these anymore
@@ -75,7 +282,7 @@ void edacs(dsd_opts * opts, dsd_state * state)
 
   state->edacs_vc_lcn = -1; //init on negative for ncurses and tuning
 
-  int i, j;
+  int i;
   int edacs_bit[241] = {0}; //zero out bit array and collect bits into it.
 
   for (i = 0; i < 240; i++) //288 bits every transmission minus 48 bit (24 dibit) sync pattern
@@ -124,32 +331,32 @@ void edacs(dsd_opts * opts, dsd_state * state)
   {
 
     //ESK on/off detection, I honestly don't remember the logic for this anymore, but it works fine
-	  if ( (((fr_1t & 0xF000000000) >> 36) != 0xB)  && (((fr_1t & 0xF000000000) >> 36) != 0x1) && (((fr_1t & 0xFF00000000) >> 32) != 0xF3) )
-	  {
+    if ( (((fr_1t & 0xF000000000) >> 36) != 0xB)  && (((fr_1t & 0xF000000000) >> 36) != 0x1) && (((fr_1t & 0xFF00000000) >> 32) != 0xF3) )
+    {
       //experimenting with values here, not too high, and not too low
-		  if ( (((fr_1t & 0xF000000000) >> 36) <= 0x8 ))
+      if ( (((fr_1t & 0xF000000000) >> 36) <= 0x8 ))
       { 
-		    state->esk_mask = 0xA0;
+        state->esk_mask = 0xA0;
       }
       //ideal value would be 5, but some other values exist that don't allow it
-		  if ( (((fr_1t & 0xF000000000) >> 36) > 0x8 ) )
+      if ( (((fr_1t & 0xF000000000) >> 36) > 0x8 ) )
       { 
-		    state->esk_mask = 0x0;
+        state->esk_mask = 0x0;
       }
-	  }
+    }
 
     //Standard/Networked Auto Detection
-	  //if (command == netcmd) //netcmd is F3 Standard/Networked (I think)
+    //if (command == netcmd) //netcmd is F3 Standard/Networked (I think)
     if ( (fr_1t >> 32 == netcmd) || (fr_1t >> 32 == (netcmd ^ 0xA0)) ) 
     { 
-		  state->ea_mode = 0; //disable extended addressing mode
-	  }
+      state->ea_mode = 0; //disable extended addressing mode
+    }
 
     //EA Auto detection //peercmd is 0xF88 peer site relay 0xFF80000000 >> 28
-	  if (fr_1t >> 28 == peercmd || fr_1t >> 28 == (peercmd ^ 0xA00) )
+    if (fr_1t >> 28 == peercmd || fr_1t >> 28 == (peercmd ^ 0xA00) )
     {
-		  state->ea_mode = 1; //enable extended addressing mode
-	  }
+      state->ea_mode = 1; //enable extended addressing mode
+    }
 
     //Start Extended Addressing Mode 
     if (state->ea_mode == 1)
@@ -255,6 +462,7 @@ void edacs(dsd_opts * opts, dsd_state * state)
         fprintf (stderr, " Group [%05d] Source [%08d] LCN[%02d]", group, source, lcn);
 
         char mode[8]; //allow, block, digital enc
+        sprintf (mode, "%s", "");
 
         //if we are using allow/whitelist mode, then write 'B' to mode for block
         //comparison below will look for an 'A' to write to mode if it is allowed
@@ -266,6 +474,7 @@ void edacs(dsd_opts * opts, dsd_state * state)
           {
             fprintf (stderr, " [%s]", state->group_array[i].groupName);
             strcpy (mode, state->group_array[i].groupMode);
+            break;
           }
         }
 
@@ -284,6 +493,7 @@ void edacs(dsd_opts * opts, dsd_state * state)
             {
               sprintf (opts->wav_out_file, "./WAV/%s %s pV Site %lld TG %d SRC %d.wav", getDateE(), getTimeE(), state->edacs_site_id, group, source);
               openWavOutFile (opts, state);
+              // openWavOutFile48k (opts, state); //debug for testing analog wav only
             }
             
             //do condition here, in future, will allow us to use tuning methods as well, or rtl_udp as well
@@ -292,8 +502,9 @@ void edacs(dsd_opts * opts, dsd_state * state)
               if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); 
       		    SetFreq(opts->rigctl_sockfd, state->trunk_lcn_freq[lcn-1]); //minus one because the lcn index starts at zero
               state->edacs_tuned_lcn = lcn;
-              opts->p25_is_tuned = 1; 
-              
+              opts->p25_is_tuned = 1;
+              //debug testing (since I don't have EDACS standard w/ Analog nearby)
+              // edacs_analog(opts, state, group, lcn);
             }
 
             if (opts->audio_in_type == 3) //rtl dongle
@@ -302,6 +513,8 @@ void edacs(dsd_opts * opts, dsd_state * state)
               rtl_dev_tune (opts, state->trunk_lcn_freq[lcn-1]);
               state->edacs_tuned_lcn = lcn;
               opts->p25_is_tuned = 1;
+              //debug testing (since I don't have EDACS standard w/ Analog nearby)
+              // edacs_analog(opts, state, group, lcn);
               #endif
             }
 
@@ -386,6 +599,7 @@ void edacs(dsd_opts * opts, dsd_state * state)
         fprintf (stderr, " AFS [0x%03X] [%02d-%03d] LCN [%02d]", afs, a, fs, lcn);
 
         char mode[8]; //allow, block, digital enc
+        sprintf (mode, "%s", "");
 
         //if we are using allow/whitelist mode, then write 'B' to mode for block
         //comparison below will look for an 'A' to write to mode if it is allowed
@@ -397,49 +611,61 @@ void edacs(dsd_opts * opts, dsd_state * state)
           {
             fprintf (stderr, " [%s]", state->group_array[i].groupName);
             strcpy (mode, state->group_array[i].groupMode);
+            break;
           }
         }
 
+        //NOTE: Restructured below so that analog and digital are handled the same, just that when
+        //its analog, it will now start edacs_analog which will while loop analog samples until
+        //signal level drops (RMS, or a dotting sequence is detected)
+
+        //analog working now with edacs_analog
         if (command == 0xEE)
-        {
-          //no handling for raw audio yet...that works properly atleast
           fprintf (stderr, " Analog"); 
-        }
-        else //Digital Call (ProVoice, hopefully not Aegis in 2022)
-        {
+
+        //Digital Call (ProVoice, hopefully, and not Aegis in 2022)
+        else
           fprintf (stderr, " Digital");
-          //this is working now with the new import setup
-          if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0) ) //DE is digital encrypted, B is block
+
+        //skip analog calls on RTL Input on ARM devices due to High CPU usage from RTL RMS function
+        #ifdef __arm__
+        if (command == 0xEE && opts->audio_in_type == 3)
+          goto ENDPV;
+        #endif
+
+        //this is working now with the new import setup
+        if (opts->p25_trunk == 1 && (strcmp(mode, "DE") != 0) && (strcmp(mode, "B") != 0) ) //DE is digital encrypted, B is block
+        {
+          if (lcn < 26 && state->trunk_lcn_freq[lcn-1] != 0) //don't tune if zero (not loaded or otherwise)
           {
-            if (lcn < 26 && state->trunk_lcn_freq[lcn-1] != 0) //don't tune if zero (not loaded or otherwise)
+            //openwav file and do per call right here
+            if (opts->dmr_stereo_wav == 1 && (opts->use_rigctl == 1 || opts->audio_in_type == 3))
             {
-              //openwav file and do per call right here
-              if (opts->dmr_stereo_wav == 1 && (opts->use_rigctl == 1 || opts->audio_in_type == 3))
-              {
-                sprintf (opts->wav_out_file, "./WAV/%s %s pV Site %lld AFS %X.wav", getDateE(), getTimeE(), state->edacs_site_id, afs);
-                openWavOutFile (opts, state);
-              }
-
-              if (opts->use_rigctl == 1)
-              {
-                if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); 
-      		      SetFreq(opts->rigctl_sockfd, state->trunk_lcn_freq[lcn-1]); //minus one because our index starts at zero
-                state->edacs_tuned_lcn = lcn;
-                opts->p25_is_tuned = 1; 
-              }
-
-              if (opts->audio_in_type == 3) //rtl dongle
-              {
-                #ifdef USE_RTLSDR
-                rtl_dev_tune (opts, state->trunk_lcn_freq[lcn-1]);
-                state->edacs_tuned_lcn = lcn;
-                opts->p25_is_tuned = 1;
-                #endif
-              }
-
+              sprintf (opts->wav_out_file, "./WAV/%s %s pV Site %lld AFS %02d-%03d - %X.wav", getDateE(), getTimeE(), state->edacs_site_id, a, fs, afs);
+              if (command == 0xEF) openWavOutFile (opts, state); //digital
+              if (command == 0xEE) openWavOutFile48k (opts, state); //analog at 48k
+            }
+
+            if (opts->use_rigctl == 1)
+            {
+              if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw); 
+              SetFreq(opts->rigctl_sockfd, state->trunk_lcn_freq[lcn-1]); //minus one because our index starts at zero
+              state->edacs_tuned_lcn = lcn;
+              opts->p25_is_tuned = 1;
+              if (command == 0xEE) edacs_analog(opts, state, afs, lcn);
+            }
+
+            if (opts->audio_in_type == 3) //rtl dongle
+            {
+              #ifdef USE_RTLSDR
+              rtl_dev_tune (opts, state->trunk_lcn_freq[lcn-1]);
+              state->edacs_tuned_lcn = lcn;
+              opts->p25_is_tuned = 1;
+              if (command == 0xEE) edacs_analog(opts, state, afs, lcn);
+              #endif
             }
-          
           }
+        
         }
         fprintf (stderr, "%s", KNRM);
       }
@@ -460,10 +686,63 @@ void edacs(dsd_opts * opts, dsd_state * state)
 
     } //end Standard or Networked
 
-  } 
+  }
+
+  ENDPV:
 
   fprintf (stderr, "\n");
 
 }
 
+void eot_cc(dsd_opts * opts, dsd_state * state)
+{
+
+  fprintf (stderr, "EOT; \n");
+
+  //jump back to CC here
+  if (opts->p25_trunk == 1 && state->p25_cc_freq != 0 && opts->p25_is_tuned == 1)
+  {
+    
+    //rigctl
+    if (opts->use_rigctl == 1)
+    {
+      state->lasttg = 0;
+      state->lastsrc = 0;
+      state->payload_algid = 0; 
+      state->payload_keyid = 0;
+      state->payload_miP = 0;
+      //reset some strings
+      sprintf (state->call_string[0], "%s", "                     "); //21 spaces
+      sprintf (state->call_string[1], "%s", "                     "); //21 spaces
+      sprintf (state->active_channel[0], "%s", "");
+      sprintf (state->active_channel[1], "%s", "");
+      opts->p25_is_tuned = 0;
+      state->p25_vc_freq[0] = state->p25_vc_freq[1] = 0;
+      if (opts->setmod_bw != 0 ) SetModulation(opts->rigctl_sockfd, opts->setmod_bw);
+      SetFreq(opts->rigctl_sockfd, state->p25_cc_freq);        
+    }
+
+    //rtl
+    else if (opts->audio_in_type == 3)
+    {
+      #ifdef USE_RTLSDR
+      state->lasttg = 0;
+      state->lastsrc = 0;
+      state->payload_algid = 0;
+      state->payload_keyid = 0;
+      state->payload_miP = 0;
+      //reset some strings
+      sprintf (state->call_string[0], "%s", "                     "); //21 spaces
+      sprintf (state->call_string[1], "%s", "                     "); //21 spaces
+      sprintf (state->active_channel[0], "%s", "");
+      sprintf (state->active_channel[1], "%s", "");
+      opts->p25_is_tuned = 0;
+      state->p25_vc_freq[0] = state->p25_vc_freq[1] = 0;
+      rtl_dev_tune (opts, state->p25_cc_freq);
+      #endif
+    }
+
+  }
+}
+
  

src/ez.cpp

@@ -178,146 +178,166 @@ int ez_rs28_sacch (int payload[180], int parity[132])
   return (ec);
 }
 
-//I-ISCH Lookup section, borrowed from OP25
-std::map <std::string, int> isch_map;
+std::map <std::uint64_t, int> isch_map;
 void map_isch()
 {
-	isch_map["184229d461"] = 0;
-	isch_map["18761451f6"] = 1;
-	isch_map["181ae27e2f"] = 2;
-	isch_map["182edffbb8"] = 3;
-	isch_map["18df8a7510"] = 4;
-	isch_map["18ebb7f087"] = 5;
-	isch_map["188741df5e"] = 6;
-	isch_map["18b37c5ac9"] = 7;
-	isch_map["1146a44f13"] = 8;
-	isch_map["117299ca84"] = 9;
-	isch_map["111e6fe55d"] = 10;
-	isch_map["112a5260ca"] = 11;
-	isch_map["11db07ee62"] = 12;
-	isch_map["11ef3a6bf5"] = 13;
-	isch_map["1183cc442c"] = 14;
-	isch_map["11b7f1c1bb"] = 15;
-	isch_map["1a4a2e239e"] = 16;
-	isch_map["1a7e13a609"] = 17;
-	isch_map["1a12e589d0"] = 18;
-	isch_map["1a26d80c47"] = 19;
-	isch_map["1ad78d82ef"] = 20;
-	isch_map["1ae3b00778"] = 21;
-	isch_map["1a8f4628a1"] = 22;
-	isch_map["1abb7bad36"] = 23;
-	isch_map["134ea3b8ec"] = 24;
-	isch_map["137a9e3d7b"] = 25;
-	isch_map["13166812a2"] = 26;
-	isch_map["1322559735"] = 27;
-	isch_map["13d300199d"] = 28;
-	isch_map["13e73d9c0a"] = 29;
-	isch_map["138bcbb3d3"] = 30;
-	isch_map["13bff63644"] = 31;
-	isch_map["1442f705ef"] = 32;
-	isch_map["1476ca8078"] = 33;
-	isch_map["141a3cafa1"] = 34;
-	isch_map["142e012a36"] = 35;
-	isch_map["14df54a49e"] = 36;
-	isch_map["14eb692109"] = 37;
-	isch_map["14879f0ed0"] = 38;
-	isch_map["14b3a28b47"] = 39;
-	isch_map["1d467a9e9d"] = 40;
-	isch_map["1d72471b0a"] = 41;
-	isch_map["1d1eb134d3"] = 42;
-	isch_map["1d2a8cb144"] = 43;
-	isch_map["1ddbd93fec"] = 44;
-	isch_map["1defe4ba7b"] = 45;
-	isch_map["1d831295a2"] = 46;
-	isch_map["1db72f1035"] = 47;
-	isch_map["164af0f210"] = 48;
-	isch_map["167ecd7787"] = 49;
-	isch_map["16123b585e"] = 50;
-	isch_map["162606ddc9"] = 51;
-	isch_map["16d7535361"] = 52;
-	isch_map["16e36ed6f6"] = 53;
-	isch_map["168f98f92f"] = 54;
-	isch_map["16bba57cb8"] = 55;
-	isch_map["1f4e7d6962"] = 56;
-	isch_map["1f7a40ecf5"] = 57;
-	isch_map["1f16b6c32c"] = 58;
-	isch_map["1f228b46bb"] = 59;
-	isch_map["1fd3dec813"] = 60;
-	isch_map["1fe7e34d84"] = 61;
-	isch_map["1f8b15625d"] = 62;
-	isch_map["1fbf28e7ca"] = 63;
-	isch_map["84d62c339"] = 64;
-	isch_map["8795f46ae"] = 65;
-	isch_map["815a96977"] = 66;
-	isch_map["82194ece0"] = 67;
-	isch_map["8d0c16248"] = 68;
-	isch_map["8e4fce7df"] = 69;
-	isch_map["8880ac806"] = 70;
-	isch_map["8bc374d91"] = 71;
-	isch_map["149ef584b"] = 72;
-	isch_map["17dd2dddc"] = 73;
-	isch_map["11124f205"] = 74;
-	isch_map["125197792"] = 75;
-	isch_map["1d44cf93a"] = 76;
-	isch_map["1e0717cad"] = 77;
-	isch_map["18c875374"] = 78;
-	isch_map["1b8bad6e3"] = 79;
-	isch_map["a456534c6"] = 80;
-	isch_map["a7158b151"] = 81;
-	isch_map["a1dae9e88"] = 82;
-	isch_map["a29931b1f"] = 83;
-	isch_map["ad8c695b7"] = 84;
-	isch_map["aecfb1020"] = 85;
-	isch_map["a800d3ff9"] = 86;
-	isch_map["ab430ba6e"] = 87;
-	isch_map["341e8afb4"] = 88;
-	isch_map["375d52a23"] = 89;
-	isch_map["3192305fa"] = 90;
-	isch_map["32d1e806d"] = 91;
-	isch_map["3dc4b0ec5"] = 92;
-	isch_map["3e8768b52"] = 93;
-	isch_map["38480a48b"] = 94;
-	isch_map["3b0bd211c"] = 95;
-	isch_map["44dbc12b7"] = 96;
-	isch_map["479819720"] = 97;
-	isch_map["41577b8f9"] = 98;
-	isch_map["4214a3d6e"] = 99;
-	isch_map["4d01fb3c6"] = 100;
-	isch_map["4e4223651"] = 101;
-	isch_map["488d41988"] = 102;
-	isch_map["4bce99c1f"] = 103;
-	isch_map["d493189c5"] = 104;
-	isch_map["d7d0c0c52"] = 105;
-	isch_map["d11fa238b"] = 106;
-	isch_map["d25c7a61c"] = 107;
-	isch_map["dd49228b4"] = 108;
-	isch_map["de0afad23"] = 109;
-	isch_map["d8c5982fa"] = 110;
-	isch_map["db864076d"] = 111;
-	isch_map["645bbe548"] = 112;
-	isch_map["6718660df"] = 113;
-	isch_map["61d704f06"] = 114;
-	isch_map["6294dca91"] = 115;
-	isch_map["6d8184439"] = 116;
-	isch_map["6ec25c1ae"] = 117;
-	isch_map["680d3ee77"] = 118;
-	isch_map["6b4ee6be0"] = 119;
-	isch_map["f41367e3a"] = 120;
-	isch_map["f750bfbad"] = 121;
-	isch_map["f19fdd474"] = 122;
-	isch_map["f2dc051e3"] = 123;
-	isch_map["fdc95df4b"] = 124;
-	isch_map["fe8a85adc"] = 125;
-	isch_map["f845e7505"] = 126;
-	isch_map["fb063f092"] = 127;
+	isch_map[0x184229d461ULL] = 0;
+	isch_map[0x18761451f6ULL] = 1;
+	isch_map[0x181ae27e2fULL] = 2;
+	isch_map[0x182edffbb8ULL] = 3;
+	isch_map[0x18df8a7510ULL] = 4;
+	isch_map[0x18ebb7f087ULL] = 5;
+	isch_map[0x188741df5eULL] = 6;
+	isch_map[0x18b37c5ac9ULL] = 7;
+	isch_map[0x1146a44f13ULL] = 8;
+	isch_map[0x117299ca84ULL] = 9;
+	isch_map[0x111e6fe55dULL] = 10;
+	isch_map[0x112a5260caULL] = 11;
+	isch_map[0x11db07ee62ULL] = 12;
+	isch_map[0x11ef3a6bf5ULL] = 13;
+	isch_map[0x1183cc442cULL] = 14;
+	isch_map[0x11b7f1c1bbULL] = 15;
+	isch_map[0x1a4a2e239eULL] = 16;
+	isch_map[0x1a7e13a609ULL] = 17;
+	isch_map[0x1a12e589d0ULL] = 18;
+	isch_map[0x1a26d80c47ULL] = 19;
+	isch_map[0x1ad78d82efULL] = 20;
+	isch_map[0x1ae3b00778ULL] = 21;
+	isch_map[0x1a8f4628a1ULL] = 22;
+	isch_map[0x1abb7bad36ULL] = 23;
+	isch_map[0x134ea3b8ecULL] = 24;
+	isch_map[0x137a9e3d7bULL] = 25;
+	isch_map[0x13166812a2ULL] = 26;
+	isch_map[0x1322559735ULL] = 27;
+	isch_map[0x13d300199dULL] = 28;
+	isch_map[0x13e73d9c0aULL] = 29;
+	isch_map[0x138bcbb3d3ULL] = 30;
+	isch_map[0x13bff63644ULL] = 31;
+	isch_map[0x1442f705efULL] = 32;
+	isch_map[0x1476ca8078ULL] = 33;
+	isch_map[0x141a3cafa1ULL] = 34;
+	isch_map[0x142e012a36ULL] = 35;
+	isch_map[0x14df54a49eULL] = 36;
+	isch_map[0x14eb692109ULL] = 37;
+	isch_map[0x14879f0ed0ULL] = 38;
+	isch_map[0x14b3a28b47ULL] = 39;
+	isch_map[0x1d467a9e9dULL] = 40;
+	isch_map[0x1d72471b0aULL] = 41;
+	isch_map[0x1d1eb134d3ULL] = 42;
+	isch_map[0x1d2a8cb144ULL] = 43;
+	isch_map[0x1ddbd93fecULL] = 44;
+	isch_map[0x1defe4ba7bULL] = 45;
+	isch_map[0x1d831295a2ULL] = 46;
+	isch_map[0x1db72f1035ULL] = 47;
+	isch_map[0x164af0f210ULL] = 48;
+	isch_map[0x167ecd7787ULL] = 49;
+	isch_map[0x16123b585eULL] = 50;
+	isch_map[0x162606ddc9ULL] = 51;
+	isch_map[0x16d7535361ULL] = 52;
+	isch_map[0x16e36ed6f6ULL] = 53;
+	isch_map[0x168f98f92fULL] = 54;
+	isch_map[0x16bba57cb8ULL] = 55;
+	isch_map[0x1f4e7d6962ULL] = 56;
+	isch_map[0x1f7a40ecf5ULL] = 57;
+	isch_map[0x1f16b6c32cULL] = 58;
+	isch_map[0x1f228b46bbULL] = 59;
+	isch_map[0x1fd3dec813ULL] = 60;
+	isch_map[0x1fe7e34d84ULL] = 61;
+	isch_map[0x1f8b15625dULL] = 62;
+	isch_map[0x1fbf28e7caULL] = 63;
+	isch_map[0x084d62c339ULL] = 64;
+	isch_map[0x08795f46aeULL] = 65;
+	isch_map[0x0815a96977ULL] = 66;
+	isch_map[0x082194ece0ULL] = 67;
+	isch_map[0x08d0c16248ULL] = 68;
+	isch_map[0x08e4fce7dfULL] = 69;
+	isch_map[0x08880ac806ULL] = 70;
+	isch_map[0x08bc374d91ULL] = 71;
+	isch_map[0x0149ef584bULL] = 72;
+	isch_map[0x017dd2dddcULL] = 73;
+	isch_map[0x011124f205ULL] = 74;
+	isch_map[0x0125197792ULL] = 75;
+	isch_map[0x01d44cf93aULL] = 76;
+	isch_map[0x01e0717cadULL] = 77;
+	isch_map[0x018c875374ULL] = 78;
+	isch_map[0x01b8bad6e3ULL] = 79;
+	isch_map[0x0a456534c6ULL] = 80;
+	isch_map[0x0a7158b151ULL] = 81;
+	isch_map[0x0a1dae9e88ULL] = 82;
+	isch_map[0x0a29931b1fULL] = 83;
+	isch_map[0x0ad8c695b7ULL] = 84;
+	isch_map[0x0aecfb1020ULL] = 85;
+	isch_map[0x0a800d3ff9ULL] = 86;
+	isch_map[0x0ab430ba6eULL] = 87;
+	isch_map[0x0341e8afb4ULL] = 88;
+	isch_map[0x0375d52a23ULL] = 89;
+	isch_map[0x03192305faULL] = 90;
+	isch_map[0x032d1e806dULL] = 91;
+	isch_map[0x03dc4b0ec5ULL] = 92;
+	isch_map[0x03e8768b52ULL] = 93;
+	isch_map[0x038480a48bULL] = 94;
+	isch_map[0x03b0bd211cULL] = 95;
+	isch_map[0x044dbc12b7ULL] = 96;
+	isch_map[0x0479819720ULL] = 97;
+	isch_map[0x041577b8f9ULL] = 98;
+	isch_map[0x04214a3d6eULL] = 99;
+	isch_map[0x04d01fb3c6ULL] = 100;
+	isch_map[0x04e4223651ULL] = 101;
+	isch_map[0x0488d41988ULL] = 102;
+	isch_map[0x04bce99c1fULL] = 103;
+	isch_map[0x0d493189c5ULL] = 104;
+	isch_map[0x0d7d0c0c52ULL] = 105;
+	isch_map[0x0d11fa238bULL] = 106;
+	isch_map[0x0d25c7a61cULL] = 107;
+	isch_map[0x0dd49228b4ULL] = 108;
+	isch_map[0x0de0afad23ULL] = 109;
+	isch_map[0x0d8c5982faULL] = 110;
+	isch_map[0x0db864076dULL] = 111;
+	isch_map[0x0645bbe548ULL] = 112;
+	isch_map[0x06718660dfULL] = 113;
+	isch_map[0x061d704f06ULL] = 114;
+	isch_map[0x06294dca91ULL] = 115;
+	isch_map[0x06d8184439ULL] = 116;
+	isch_map[0x06ec25c1aeULL] = 117;
+	isch_map[0x0680d3ee77ULL] = 118;
+	isch_map[0x06b4ee6be0ULL] = 119;
+	isch_map[0x0f41367e3aULL] = 120;
+	isch_map[0x0f750bfbadULL] = 121;
+	isch_map[0x0f19fdd474ULL] = 122;
+	isch_map[0x0f2dc051e3ULL] = 123;
+	isch_map[0x0fdc95df4bULL] = 124;
+	isch_map[0x0fe8a85adcULL] = 125;
+	isch_map[0x0f845e7505ULL] = 126;
+	isch_map[0x0fb063f092ULL] = 127;
+	isch_map[0x575d57f7ffULL] =  -2; // S-ISCH
 }
 
-int isch_lookup (unsigned long long int isch)
+//I-ISCH Lookup, borrowed from OP25 (now w/ error correction)
+int isch_lookup (uint64_t isch)
 {
-  map_isch(); //initialize the lookup map
-  char s[64];
-  int decoded = -2; //initialize lookup to an invalid number
-  sprintf(s, "%llx", isch);
-  decoded = isch_map[s];
-  return(decoded);
-}
+	map_isch(); //initialize the lookup map
+	int decoded = -2;
+
+	// Must contain bit errors if no exact match, so
+	// look for codeword with smallest hamming distance
+	if (isch_map.find(isch) == isch_map.end())
+	{
+		int popct, popmin = 40;
+		for (auto it = isch_map.begin(); it != isch_map.end(); ++it)
+		{
+			popct = __builtin_popcountll(isch ^ it->first);
+			// Encoding is (40, 9, 16) which can correct at most 7 bit-errors
+			if ((popct <= 7) && (popct < popmin))
+			{
+					decoded = it->second;
+					popmin = popct;
+			}
+		}
+	return decoded;
+	}
+	else  // No errors, so simply return the matching value
+		decoded = isch_map[isch];
+		
+	return decoded;
+
+}

src/m17.c

@@ -40,11 +40,32 @@ uint8_t m17_scramble[369] = {
 char b40[] = " ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-/.";
 
 uint8_t p1[62] = {
-1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1,
-1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1,
-0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1
+1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1,
+1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1,
+1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1,
+1, 1, 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1
 };
 
+//produce 6 short samples (48k) for every 1 short sample (8k)
+void upsampleM17 (short invalue, short prev, short outbuf[6])
+{
+
+  float c, d;
+
+  c = prev;
+  d = invalue;
+
+  // basic triangle interpolation
+  outbuf[0] = c = ((invalue * (float) 0.166) + (c * (float) 0.834));
+  outbuf[1] = c = ((invalue * (float) 0.332) + (c * (float) 0.668));
+  outbuf[2] = c = ((invalue * (float) 0.500) + (c * (float) 0.5));
+  outbuf[3] = c = ((invalue * (float) 0.668) + (c * (float) 0.332));
+  outbuf[4] = c = ((invalue * (float) 0.834) + (c * (float) 0.166));
+  outbuf[5] = c = d;
+  prev = d; //shift prev to the last d value for the next repitition
+
+}
+
 //from M17_Implementations -- sp5wwp -- should have just looked here to begin with
 //this setup looks very similar to the OP25 variant of crc16, but with a few differences (uses packed bytes)
 uint16_t crc16m17(const uint8_t *in, const uint16_t len)
@@ -136,7 +157,7 @@ void M17decodeLSF(dsd_state * state)
   uint16_t lsf_type = (uint16_t)ConvertBitIntoBytes(&state->m17_lsf[96], 16);
 
   //this is the way the manual/code expects you to read these bits
-  uint8_t lsf_ps = (lsf_type >> 0) & 0x1;
+  // uint8_t lsf_ps = (lsf_type >> 0) & 0x1;
   uint8_t lsf_dt = (lsf_type >> 1) & 0x3;
   uint8_t lsf_et = (lsf_type >> 3) & 0x3;
   uint8_t lsf_es = (lsf_type >> 5) & 0x3;
@@ -147,17 +168,16 @@ void M17decodeLSF(dsd_state * state)
   state->m17_str_dt = lsf_dt;
   state->m17_dst = lsf_dst;
   state->m17_src = lsf_src;
+  state->m17_can = lsf_cn;
 
   fprintf (stderr, "\n");
 
   //packet or stream
-  if (lsf_ps == 0) fprintf (stderr, " P-");
-  if (lsf_ps == 1) fprintf (stderr, " S-");
+  // if (lsf_ps == 0) fprintf (stderr, " P-");
+  // if (lsf_ps == 1) fprintf (stderr, " S-");
 
   fprintf (stderr, " CAN: %d", lsf_cn);
   M17decodeCSD(state, lsf_dst, lsf_src);
-
-  if (lsf_et != 0) fprintf (stderr, " ENC");
   
   if (lsf_dt == 0) fprintf (stderr, " Reserved");
   if (lsf_dt == 1) fprintf (stderr, " Data");
@@ -166,8 +186,9 @@ void M17decodeLSF(dsd_state * state)
 
   if (lsf_rs != 0) fprintf (stderr, " RS: %02X", lsf_rs);
 
-  if (lsf_et == 1) fprintf (stderr, " AES-CTR");
-  if (lsf_et == 2) fprintf (stderr, " Scrambler - %d", lsf_es);
+  if (lsf_et != 0) fprintf (stderr, " ENC:");
+  if (lsf_et == 2) fprintf (stderr, " AES-CTR");
+  if (lsf_et == 1) fprintf (stderr, " Scrambler - %d", lsf_es);
 
   state->m17_enc = lsf_et;
   state->m17_enc_st = lsf_es;
@@ -186,16 +207,16 @@ void M17decodeLSF(dsd_state * state)
     if (lsf_es == 3) fprintf (stderr, " Reserved");
   }
   
-  if (lsf_et == 1)
+  if (lsf_et == 2)
   {
     fprintf (stderr, " IV: ");
-    for (i = 0; i < 14; i++)
+    for (i = 0; i < 16; i++)
       fprintf (stderr, "%02X", state->m17_meta[i]);
   }
   
 }
 
-int M17processLICH(dsd_state * state, dsd_opts * opts, uint8_t lich_bits[96])
+int M17processLICH(dsd_state * state, dsd_opts * opts, uint8_t * lich_bits)
 {
   int i, j, err;
   err = 0;
@@ -292,14 +313,10 @@ int M17processLICH(dsd_state * state, dsd_opts * opts, uint8_t lich_bits[96])
   return err;
 }
 
-void M17processCodec2_1600(dsd_opts * opts, dsd_state * state, uint8_t payload[128])
+void M17processCodec2_1600(dsd_opts * opts, dsd_state * state, uint8_t * payload)
 {
-
-  //If payload is the same from the stream in this mode, I suppose we could use this area to parse
-  //or send off the remaining data to be handled or decoded , or just print out the raw data bytes
-
   int i;
-  unsigned char voice1[8]; //codec2_bytes_per_frame
+  unsigned char voice1[8];
   unsigned char voice2[8];
 
   for (i = 0; i < 8; i++)
@@ -329,35 +346,47 @@ void M17processCodec2_1600(dsd_opts * opts, dsd_state * state, uint8_t payload[1
   
   #ifdef USE_CODEC2
   size_t nsam;
-  nsam = 320; //codec2_samples_per_frame(state->codec2_1600);
-
-  short samp1[nsam];
-  // short samp2[nsam];
-  memset (samp1, 0, sizeof(samp1));
-  // memset (samp2, 0, sizeof(samp2));
+  nsam = 160;
 
+  //converted to using allocated memory pointers to prevent the overflow issues
+  short * samp1 = malloc (sizeof(short) * nsam);
+  short * upsamp = malloc (sizeof(short) * nsam * 6);
+  short * out = malloc (sizeof(short) * 6);
+  short prev;
+  int j;
 
   codec2_decode(state->codec2_1600, samp1, voice1);
-  // codec2_decode(state->codec2_1600, samp2, voice2);
 
-
-  if (opts->audio_out_type == 0 && state->m17_enc == 0)
+  if (opts->audio_out_type == 0 && state->m17_enc == 0) //Pulse Audio
   {
     pa_simple_write(opts->pulse_digi_dev_out, samp1, nsam*2, NULL);
-    // pa_simple_write(opts->pulse_digi_dev_out, samp2, nsam*2, NULL);
-  }
-    
-  if (opts->audio_out_type == 5 && state->m17_enc == 0)
-  {
-    write (opts->audio_out_fd, samp1, nsam*2);
-    // write (opts->audio_out_fd, samp2, nsam*2);
+
   }
 
+  #ifdef AERO_BUILD
+  if (opts->audio_out_type == 5 && state->m17_enc == 0) //OSS w/ required upsample to 48k
+  {
+    //upsample to 48k and then play
+    prev = samp1[0];
+    for (i = 0; i < 160; i++)
+    {
+      upsampleM17 (samp1[i], prev, out);
+      for (j = 0; j < 6; j++) upsamp[(i*6)+j] = out[j];
+    }
+    write (opts->audio_out_fd, upsamp, nsam*2*6);
+  }
+  #else
+  if (opts->audio_out_type == 5 && state->m17_enc == 0) //OSS via PADSP at 8k
+  {
+    write (opts->audio_out_fd, samp1, nsam*2);
+  }
+  #endif
+
+
   //WIP: Wav file saving -- still need a way to open/close/label wav files similar to call history
-  if(opts->wav_out_f != NULL && state->m17_enc == 0)
+  if(opts->wav_out_f != NULL && state->m17_enc == 0) //WAV
   {
     sf_write_short(opts->wav_out_f, samp1, nsam);
-    // sf_write_short(opts->wav_out_f, samp2, nsam);
   }
 
   //TODO: Codec2 Raw file saving
@@ -366,14 +395,18 @@ void M17processCodec2_1600(dsd_opts * opts, dsd_state * state, uint8_t payload[1
 
   // }
 
+  free (samp1);
+  free (upsamp);
+  free (out);
+
   #endif
 
 }
 
-void M17processCodec2_3200(dsd_opts * opts, dsd_state * state, uint8_t payload[128])
+void M17processCodec2_3200(dsd_opts * opts, dsd_state * state, uint8_t * payload)
 {
   int i;
-  unsigned char voice1[8]; //codec2_bytes_per_frame
+  unsigned char voice1[8];
   unsigned char voice2[8];
 
   for (i = 0; i < 8; i++)
@@ -404,32 +437,62 @@ void M17processCodec2_3200(dsd_opts * opts, dsd_state * state, uint8_t payload[1
   
   #ifdef USE_CODEC2
   size_t nsam;
-  nsam = 160; //codec2_samples_per_frame(state->codec2_3200);
-
-  short samp1[nsam];
-  short samp2[nsam];
-  memset (samp1, 0, sizeof(samp1));
-  memset (samp2, 0, sizeof(samp2));
+  nsam = 160;
 
+  //converted to using allocated memory pointers to prevent the overflow issues
+  short * samp1 = malloc (sizeof(short) * nsam);
+  short * samp2 = malloc (sizeof(short) * nsam);
+  short * upsamp = malloc (sizeof(short) * nsam * 6);
+  short * out = malloc (sizeof(short) * 6);
+  short prev;
+  int j;
 
   codec2_decode(state->codec2_3200, samp1, voice1);
   codec2_decode(state->codec2_3200, samp2, voice2);
 
-
-  if (opts->audio_out_type == 0 && state->m17_enc == 0)
+  if (opts->audio_out_type == 0 && state->m17_enc == 0) //Pulse Audio
   {
     pa_simple_write(opts->pulse_digi_dev_out, samp1, nsam*2, NULL);
     pa_simple_write(opts->pulse_digi_dev_out, samp2, nsam*2, NULL);
   }
-    
-  if (opts->audio_out_type == 5 && state->m17_enc == 0)
+
+  #ifdef AERO_BUILD
+  if (opts->audio_out_type == 5 && state->m17_enc == 0) //OSS w/ required upsample to 48k
+  {
+    //upsample to 48k and then play
+    // prev = samp1[0];
+    prev = 0;
+    for (i = 0; i < 160; i++)
+    {
+      upsampleM17 (samp1[i], prev, out);
+      for (j = 0; j < 6; j++) upsamp[(i*6)+j] = out[j];
+    }
+    write (opts->audio_out_fd, upsamp, nsam*2*6);
+    prev = samp2[0];
+    for (i = 0; i < 160; i++)
+    {
+      upsampleM17 (samp2[i], prev, out);
+      for (j = 0; j < 6; j++) upsamp[(i*6)+j] = out[j];
+    }
+    write (opts->audio_out_fd, upsamp, nsam*2*6);
+  }
+  #else
+  if (opts->audio_out_type == 5 && state->m17_enc == 0) //OSS via PADSP at 8k
+  {
+    write (opts->audio_out_fd, samp1, nsam*2);
+    write (opts->audio_out_fd, samp2, nsam*2);
+  }
+  #endif
+
+
+  if (opts->audio_out_type == 1 && state->m17_enc == 0) //STDOUT
   {
     write (opts->audio_out_fd, samp1, nsam*2);
     write (opts->audio_out_fd, samp2, nsam*2);
   }
 
   //WIP: Wav file saving -- still need a way to open/close/label wav files similar to call history
-  if(opts->wav_out_f != NULL && state->m17_enc == 0)
+  if(opts->wav_out_f != NULL && state->m17_enc == 0) //WAV
   {
     sf_write_short(opts->wav_out_f, samp1, nsam);
     sf_write_short(opts->wav_out_f, samp2, nsam);
@@ -441,21 +504,26 @@ void M17processCodec2_3200(dsd_opts * opts, dsd_state * state, uint8_t payload[1
 
   // }
 
+  free (samp1);
+  free (samp2);
+  free (upsamp);
+  free (out);
+
   #endif
 
 }
 
-void M17prepareStream(dsd_opts * opts, dsd_state * state, uint8_t m17_bits[368])
+void M17prepareStream(dsd_opts * opts, dsd_state * state, uint8_t * m17_bits)
 {
 
-  int i, j, k, x; 
-  uint8_t m17_punc[310]; //25 * 11 = 275
+  int i, k, x; 
+  uint8_t m17_punc[275]; //25 * 11 = 275
   memset (m17_punc, 0, sizeof(m17_punc));
   for (i = 0; i < 272; i++)
     m17_punc[i] = m17_bits[i+96];
 
   //depuncture the bits
-  uint8_t m17_depunc[310]; //25 * 12 = 300
+  uint8_t m17_depunc[300]; //25 * 12 = 300
   memset (m17_depunc, 0, sizeof(m17_depunc));
   k = 0; x = 0;
   for (i = 0; i < 25; i++)
@@ -479,7 +547,7 @@ void M17prepareStream(dsd_opts * opts, dsd_state * state, uint8_t m17_bits[368])
   uint8_t s0;
   uint8_t s1;
   uint8_t m_data[28];
-  uint8_t trellis_buf[400];
+  uint8_t trellis_buf[144];
   memset (trellis_buf, 0, sizeof(trellis_buf));
   memset (temp, 0, sizeof (temp));
   memset (m_data, 0, sizeof (m_data));
@@ -520,6 +588,10 @@ void M17prepareStream(dsd_opts * opts, dsd_state * state, uint8_t m17_bits[368])
   end = trellis_buf[0];
   fn = (uint16_t)ConvertBitIntoBytes(&trellis_buf[1], 15);
 
+  //insert fn bits into meta 14 and meta 15 for Initialization Vector
+  state->m17_meta[14] = (uint8_t)ConvertBitIntoBytes(&trellis_buf[1], 7);
+  state->m17_meta[15] = (uint8_t)ConvertBitIntoBytes(&trellis_buf[8], 8);
+
   if (opts->payload == 1)
     fprintf (stderr, " FSN: %05d", fn);
 
@@ -550,13 +622,7 @@ void processM17STR(dsd_opts * opts, dsd_state * state)
 {
 
   int i, x;
-
-  //NOTE: adding more space for dbuf seems to fix the memory issue, but I don't think this is
-  //the culprit, not entirely sure what is going on here, but the issue with Cygwin (32-bit)
-  //not working at all with this also is fixed by this and I can't seem to figure out why
-  //its probably something really dumb that I am completely blind on seeing here for some reason
-
-  
+  //overflow/memory issue returns in Cygwin for...reasons...
   uint8_t dbuf[384]; //384-bit frame - 16-bit (8 symbol) sync pattern (184 dibits)
   uint8_t m17_rnd_bits[368]; //368 bits that are still scrambled (randomized)
   uint8_t m17_int_bits[368]; //368 bits that are still interleaved
@@ -612,12 +678,9 @@ void processM17STR(dsd_opts * opts, dsd_state * state)
 void processM17LSF(dsd_opts * opts, dsd_state * state)
 {
 
-  //NOTE1: Pretty sure the flow here is all correct, but the initial (and only)
-  //LSF frame is demodulated incorrectly, so more than likely, this frame will
-  //always be bad since there is only one sent before STR
-
-  //NOTE2: Even with the preamble detection and LSF sync, we still get bad decode on this
-
+  //NOTE: Have not been able to get this to work successfully, but considering
+  //there is only one LSF frame at the beginning of TX, its probably just as easy to
+  //use and rely on the STR frame and embedded LSF chunk, which does work properly
   int i, j, k, x;
   uint8_t dbuf[384]; //384-bit frame - 16-bit (8 symbol) sync pattern (184 dibits)
   uint8_t m17_rnd_bits[500]; //368 bits that are still scrambled (randomized)
@@ -673,8 +736,8 @@ void processM17LSF(dsd_opts * opts, dsd_state * state)
   uint8_t temp[500];
   uint8_t s0;
   uint8_t s1;
-  uint8_t m_data[32];
-  uint8_t trellis_buf[400];
+  uint8_t m_data[30];
+  uint8_t trellis_buf[240]; //30*8 = 240
   memset (trellis_buf, 0, sizeof(trellis_buf));
   memset (temp, 0, sizeof (temp));
   memset (m_data, 0, sizeof (m_data));

src/nxdn_deperm.c

@@ -49,9 +49,9 @@ void nxdn_descramble(uint8_t dibits[], int len)
 
 void nxdn_deperm_facch(dsd_opts * opts, dsd_state * state, uint8_t bits[144])
 {
-	uint8_t deperm[200]; //144
-	uint8_t depunc[200]; //192
-	uint8_t trellis_buf[400]; //96
+	uint8_t deperm[144]; //144
+	uint8_t depunc[192]; //192
+	uint8_t trellis_buf[96]; //96
 	uint16_t crc = 0; //crc calculated by function
 	uint16_t check = 0; //crc from payload for comparison
 	int out;
@@ -70,7 +70,7 @@ void nxdn_deperm_facch(dsd_opts * opts, dsd_state * state, uint8_t bits[144])
 	}
 
 	//switch to the convolutional decoder
-	uint8_t temp[210];
+	uint8_t temp[200];
 	uint8_t s0;
   uint8_t s1;
 	uint8_t m_data[20]; //13
@@ -79,17 +79,10 @@ void nxdn_deperm_facch(dsd_opts * opts, dsd_state * state, uint8_t bits[144])
 	memset (trellis_buf, 0, sizeof(trellis_buf));
 
 	for (int i = 0; i < 192; i++)
-	{
 		temp[i] = depunc[i] << 1; 
-	}
-
-	for (int i = 0; i < 8; i++)
-	{
-		temp[i+192] = 0;
-	}
 
 	CNXDNConvolution_start();
-  for (int i = 0U; i < 100U; i++) 
+  for (int i = 0; i < 96; i++) 
   {
     s0 = temp[(2*i)];
     s1 = temp[(2*i)+1];
@@ -97,7 +90,7 @@ void nxdn_deperm_facch(dsd_opts * opts, dsd_state * state, uint8_t bits[144])
     CNXDNConvolution_decode(s0, s1);
   }
 
-  CNXDNConvolution_chainback(m_data, 96U);
+  CNXDNConvolution_chainback(m_data, 92);
 
 	for(int i = 0; i < 12; i++)
   {
@@ -119,7 +112,7 @@ void nxdn_deperm_facch(dsd_opts * opts, dsd_state * state, uint8_t bits[144])
 	}
 
 	if (crc == check) NXDN_Elements_Content_decode(opts, state, 1, trellis_buf); 
-	else if (opts->aggressive_framesync == 0) NXDN_Elements_Content_decode(opts, state, 0, trellis_buf);
+	// else if (opts->aggressive_framesync == 0) NXDN_Elements_Content_decode(opts, state, 0, trellis_buf);
 
 	if (opts->payload == 1)
 	{
@@ -143,9 +136,9 @@ void nxdn_deperm_facch(dsd_opts * opts, dsd_state * state, uint8_t bits[144])
 void nxdn_deperm_sacch(dsd_opts * opts, dsd_state * state, uint8_t bits[60])
 {
 	//see about initializing these variables
-	uint8_t deperm[200]; //60 
-	uint8_t depunc[200]; //72
-	uint8_t trellis_buf[400]; //32
+	uint8_t deperm[60]; //60 
+	uint8_t depunc[72]; //72
+	uint8_t trellis_buf[32]; //32
 
 	memset (deperm, 0, sizeof(deperm));
 	memset (depunc, 0, sizeof(depunc));
@@ -176,27 +169,20 @@ void nxdn_deperm_sacch(dsd_opts * opts, dsd_state * state, uint8_t bits[60])
 	}
 
 	//switch to the convolutional decoder
-	uint8_t temp[90];
+	uint8_t temp[80];
 	uint8_t s0;
   uint8_t s1;
-	uint8_t m_data[10]; //5
+	uint8_t m_data[5]; //5
 
 	memset (temp, 0, sizeof (temp));
 	memset (m_data, 0, sizeof (m_data));
 	memset (trellis_buf, 0, sizeof(trellis_buf));
 
 	for (int i = 0; i < 72; i++)
-	{
 		temp[i] = depunc[i] << 1; 
-	}
-
-	for (int i = 0; i < 8; i++)
-	{
-		temp[i+72] = 0; 
-	}
 
 	CNXDNConvolution_start();
-  for (int i = 0U; i < 36U; i++) //40
+  for (int i = 0; i < 36; i++)
   {
     s0 = temp[(2*i)];
     s1 = temp[(2*i)+1];
@@ -205,7 +191,7 @@ void nxdn_deperm_sacch(dsd_opts * opts, dsd_state * state, uint8_t bits[60])
   }
 
 	//stored as 5 bytes, will need to convert to trellis_buf after running
-  CNXDNConvolution_chainback(m_data, 32U); //36
+  CNXDNConvolution_chainback(m_data, 32);
 
 	for(int i = 0; i < 4; i++)
   {
@@ -232,7 +218,7 @@ void nxdn_deperm_sacch(dsd_opts * opts, dsd_state * state, uint8_t bits[60])
 		if (state->nxdn_last_ran != -1) fprintf (stderr, " RAN %02d ", state->nxdn_last_ran);
 		else fprintf (stderr, "        ");
 
-		uint8_t nsf_sacch[400];
+		uint8_t nsf_sacch[26];
 		memset (nsf_sacch, 0, sizeof(nsf_sacch));
 		for (int i = 0; i < 26; i++)
 		{
@@ -350,9 +336,9 @@ void nxdn_deperm_sacch(dsd_opts * opts, dsd_state * state, uint8_t bits[60])
 
 void nxdn_deperm_facch2_udch(dsd_opts * opts, dsd_state * state, uint8_t bits[348], uint8_t type)
 {
-	uint8_t deperm[500]; //348
-	uint8_t depunc[500]; //406
-	uint8_t trellis_buf[400]; //199
+	uint8_t deperm[348]; //348
+	uint8_t depunc[406]; //406
+	uint8_t trellis_buf[208]; //199
 	int id = 0;
 	uint16_t crc = 0;
 	uint16_t check = 0;
@@ -381,26 +367,19 @@ void nxdn_deperm_facch2_udch(dsd_opts * opts, dsd_state * state, uint8_t bits[34
 	}
 	
 	//switch to the convolutional decoder
-	uint8_t temp[500]; //220, this one was way too small
+	uint8_t temp[406];
 	uint8_t s0;
   uint8_t s1;
-	uint8_t m_data[52]; //26
+	uint8_t m_data[26]; //26
 	memset (trellis_buf, 0, sizeof(trellis_buf));
 	memset (temp, 0, sizeof (temp));
 	memset (m_data, 0, sizeof (m_data));
 
 	for (int i = 0; i < 406; i++)
-	{
 		temp[i] = depunc[i] << 1; 
-	}
-
-	for (int i = 0; i < 8; i++)
-	{
-		temp[i+203] = 0; 
-	}
 
 	CNXDNConvolution_start();
-  for (int i = 0U; i < 207U; i++) 
+  for (int i = 0; i < 203; i++) 
   {
     s0 = temp[(2*i)];
     s1 = temp[(2*i)+1];
@@ -409,7 +388,7 @@ void nxdn_deperm_facch2_udch(dsd_opts * opts, dsd_state * state, uint8_t bits[34
   }
 
 	//numerals seem okay now
-  CNXDNConvolution_chainback(m_data, 203U); 
+  CNXDNConvolution_chainback(m_data, 199); 
 
 	for(int i = 0; i < 26; i++)
   {
@@ -440,7 +419,7 @@ void nxdn_deperm_facch2_udch(dsd_opts * opts, dsd_state * state, uint8_t bits[34
 
 	//just going to leave this all here in case its needed, like in cac,
 	//don't have any samples with f2 or udch data in it
-	for (int i = 0; i < 199-8; i++) 
+	for (int i = 0; i < 199-8-15; i++) 
 	{
 		f2u_message_buffer[i] = trellis_buf[i+8]; 
 	}
@@ -450,11 +429,11 @@ void nxdn_deperm_facch2_udch(dsd_opts * opts, dsd_state * state, uint8_t bits[34
 		if (type == 1) NXDN_Elements_Content_decode(opts, state, 1, f2u_message_buffer);
 		if (type == 0) ; //need handling for user data (text messages and AVL)
 	} 
-	else if (opts->aggressive_framesync == 0)
-	{
-		if (type == 1) NXDN_Elements_Content_decode(opts, state, 0, f2u_message_buffer);
-		if (type == 0) ; //need handling for user data (text messages and AVL)
-	} 
+	// else if (opts->aggressive_framesync == 0)
+	// {
+	// 	if (type == 1) NXDN_Elements_Content_decode(opts, state, 0, f2u_message_buffer);
+	// 	if (type == 0) {} //need handling for user data (text messages and AVL)
+	// } 
 
 	if (opts->payload == 1)
 	{
@@ -495,9 +474,9 @@ void nxdn_deperm_facch2_udch(dsd_opts * opts, dsd_state * state, uint8_t bits[34
 
 void nxdn_deperm_cac(dsd_opts * opts, dsd_state * state, uint8_t bits[300])
 {
-	uint8_t deperm[500]; //300
-	uint8_t depunc[500]; //350
-	uint8_t trellis_buf[400]; //171
+	uint8_t deperm[300]; //300
+	uint8_t depunc[350]; //350
+	uint8_t trellis_buf[176]; //176
 	int id = 0;
 	int ran = 0;
 	uint16_t crc = 0;
@@ -526,21 +505,19 @@ void nxdn_deperm_cac(dsd_opts * opts, dsd_state * state, uint8_t bits[300])
 	}
 
 	//switch to the convolutional decoder
-	uint8_t temp[360];
+	uint8_t temp[179];
 	uint8_t s0;
   uint8_t s1;
-	uint8_t m_data[52]; //26
+	uint8_t m_data[22]; //26
 	memset (trellis_buf, 0, sizeof(trellis_buf));
 	memset (temp, 0, sizeof (temp));
 	memset (m_data, 0, sizeof (m_data));
 
 	for (int i = 0; i < 350; i++)
-	{
 		temp[i] = depunc[i] << 1; 
-	}
 
 	CNXDNConvolution_start();
-  for (int i = 0U; i < 179U; i++) 
+  for (int i = 0; i < 175; i++) //179
   {
     s0 = temp[(2*i)];
     s1 = temp[(2*i)+1];
@@ -548,7 +525,7 @@ void nxdn_deperm_cac(dsd_opts * opts, dsd_state * state, uint8_t bits[300])
     CNXDNConvolution_decode(s0, s1);
   }
 
-  CNXDNConvolution_chainback(m_data, 175U); 
+  CNXDNConvolution_chainback(m_data, 171); //175
 
 	for(int i = 0; i < 22; i++)
   {
@@ -564,11 +541,11 @@ void nxdn_deperm_cac(dsd_opts * opts, dsd_state * state, uint8_t bits[300])
 
 	crc = crc16cac(trellis_buf, 171); 
 
-	uint8_t cac_message_buffer[400]; //171
+	uint8_t cac_message_buffer[147]; //171
 	memset (cac_message_buffer, 0, sizeof(cac_message_buffer));
 
-	//shift the cac_message into the appropriate byte arrangement for element_decoder -- skip SR field
-	for (int i = 0; i < 160; i++)
+	//shift the cac_message into the appropriate byte arrangement for element_decoder -- skip SR field and ending crc
+	for (int i = 0; i < 147; i++)
 	{
 		cac_message_buffer[i] = trellis_buf[i+8];
 	}
@@ -594,7 +571,7 @@ void nxdn_deperm_cac(dsd_opts * opts, dsd_state * state, uint8_t bits[300])
 	}
 
 	if (crc == 0) NXDN_Elements_Content_decode(opts, state, 1, cac_message_buffer);
-	else if (opts->aggressive_framesync == 0) NXDN_Elements_Content_decode(opts, state, 0, cac_message_buffer);  
+	// else if (opts->aggressive_framesync == 0) NXDN_Elements_Content_decode(opts, state, 0, cac_message_buffer);  
 
 	if (opts->payload == 1)
 	{
@@ -618,9 +595,9 @@ void nxdn_deperm_scch(dsd_opts * opts, dsd_state * state, uint8_t bits[60], uint
 	fprintf (stderr, " SCCH");
 
 	//see about initializing these variables
-	uint8_t deperm[200]; //60 
-	uint8_t depunc[200]; //72
-	uint8_t trellis_buf[400]; //32
+	uint8_t deperm[60]; //60 
+	uint8_t depunc[72]; //72
+	uint8_t trellis_buf[32]; //32
 
 	memset (deperm, 0, sizeof(deperm));
 	memset (depunc, 0, sizeof(depunc));
@@ -650,27 +627,20 @@ void nxdn_deperm_scch(dsd_opts * opts, dsd_state * state, uint8_t bits[60], uint
 	}
 
 	//switch to the convolutional decoder
-	uint8_t temp[90];
+	uint8_t temp[72];
 	uint8_t s0;
   uint8_t s1;
-	uint8_t m_data[10]; //5
+	uint8_t m_data[5]; //5
 
 	memset (temp, 0, sizeof (temp));
 	memset (m_data, 0, sizeof (m_data));
 	memset (trellis_buf, 0, sizeof(trellis_buf));
 
 	for (int i = 0; i < 72; i++)
-	{
 		temp[i] = depunc[i] << 1; 
-	}
-
-	for (int i = 0; i < 8; i++)
-	{
-		temp[i+72] = 0; 
-	}
 
 	CNXDNConvolution_start();
-  for (int i = 0U; i < 36U; i++) 
+  for (int i = 0; i < 36; i++) 
   {
     s0 = temp[(2*i)];
     s1 = temp[(2*i)+1];
@@ -678,7 +648,7 @@ void nxdn_deperm_scch(dsd_opts * opts, dsd_state * state, uint8_t bits[60], uint
     CNXDNConvolution_decode(s0, s1);
   }
 
-  CNXDNConvolution_chainback(m_data, 32U);
+  CNXDNConvolution_chainback(m_data, 32);
 
 	for(int i = 0; i < 4; i++)
   {
@@ -731,7 +701,7 @@ void nxdn_deperm_scch(dsd_opts * opts, dsd_state * state, uint8_t bits[60], uint
 	//like everything else does
 
 	if (crc == check) NXDN_decode_scch (opts, state, trellis_buf, direction);
-	else if (opts->aggressive_framesync == 0) NXDN_decode_scch (opts, state, trellis_buf, direction);
+	// else if (opts->aggressive_framesync == 0) NXDN_decode_scch (opts, state, trellis_buf, direction);
 
 	fprintf (stderr, "%s", KNRM);
 
@@ -757,9 +727,9 @@ void nxdn_deperm_scch(dsd_opts * opts, dsd_state * state, uint8_t bits[60], uint
 
 void nxdn_deperm_facch3_udch2(dsd_opts * opts, dsd_state * state, uint8_t bits[288], uint8_t type)
 {
-	uint8_t deperm[300]; //144
-	uint8_t depunc[300]; //192
-	uint8_t trellis_buf[600]; //96
+	uint8_t deperm[144]; //144
+	uint8_t depunc[192]; //192
+	uint8_t trellis_buf[96]; //96
 	uint8_t f3_udch2[288]; //completed bitstream without crc and tailing bits attached
 	uint8_t f3_udch2_bytes[36]; //completed bytes - with crc and tail
 	uint16_t crc[2]; //crc calculated by function
@@ -767,10 +737,10 @@ void nxdn_deperm_facch3_udch2(dsd_opts * opts, dsd_state * state, uint8_t bits[2
 	int out;
 
 	//switch to the convolutional decoder
-	uint8_t temp[500];
+	uint8_t temp[192];
 	uint8_t s0;
   uint8_t s1;
-	uint8_t m_data[40]; //13
+	uint8_t m_data[12]; //13
 	memset (temp, 0, sizeof(temp));
 	memset (m_data, 0, sizeof(m_data));
 	memset (trellis_buf, 0, sizeof(trellis_buf));
@@ -794,17 +764,10 @@ void nxdn_deperm_facch3_udch2(dsd_opts * opts, dsd_state * state, uint8_t bits[2
 		}
 
 		for (int i = 0; i < 192; i++)
-		{
 			temp[i] = depunc[i] << 1; 
-		}
-
-		for (int i = 0; i < 8; i++)
-		{
-			temp[i+192] = 0;
-		}
 
 		CNXDNConvolution_start();
-		for (int i = 0U; i < 100U; i++) 
+		for (int i = 0; i < 96; i++) 
 		{
 			s0 = temp[(2*i)];
 			s1 = temp[(2*i)+1];
@@ -812,7 +775,7 @@ void nxdn_deperm_facch3_udch2(dsd_opts * opts, dsd_state * state, uint8_t bits[2
 			CNXDNConvolution_decode(s0, s1);
 		}
 
-		CNXDNConvolution_chainback(m_data, 96U);
+		CNXDNConvolution_chainback(m_data, 92);
 
 		for(int i = 0; i < 12; i++)
 		{
@@ -849,11 +812,11 @@ void nxdn_deperm_facch3_udch2(dsd_opts * opts, dsd_state * state, uint8_t bits[2
 		if (type == 1) NXDN_Elements_Content_decode(opts, state, 1, trellis_buf);
 		if (type == 0) ; //need handling for user data (text messages and AVL)
 	}  
-	else if (opts->aggressive_framesync == 0) 
-	{
-		if (type == 1) NXDN_Elements_Content_decode(opts, state, 0, trellis_buf);
-		if (type == 0) ; //need handling for user data (text messages and AVL)
-	}
+	// else if (opts->aggressive_framesync == 0) 
+	// {
+	// 	if (type == 1) NXDN_Elements_Content_decode(opts, state, 0, trellis_buf);
+	// 	if (type == 0) {} //need handling for user data (text messages and AVL)
+	// }
 
 	if (opts->payload == 1)
 	{

src/nxdn_element.c

@@ -14,8 +14,8 @@
 
 void NXDN_SACCH_Full_decode(dsd_opts * opts, dsd_state * state)
 {
-  uint8_t SACCH[400]; //72
-  uint8_t sacch_bytes[10];
+  uint8_t SACCH[72]; //72
+  uint8_t sacch_bytes[9];
 
   uint32_t i;
   uint8_t CrcCorrect = 1;
@@ -38,7 +38,7 @@ void NXDN_SACCH_Full_decode(dsd_opts * opts, dsd_state * state)
   /* Decodes the element content */
   // currently only going to run this if all four CRCs are good
   if (CrcCorrect == 1) NXDN_Elements_Content_decode(opts, state, CrcCorrect, SACCH);
-  else if (opts->aggressive_framesync == 0) NXDN_Elements_Content_decode(opts, state, 0, SACCH);
+  // else if (opts->aggressive_framesync == 0) NXDN_Elements_Content_decode(opts, state, 0, SACCH);
 
   //reset the sacch field -- Github Issue #118
   memset (state->nxdn_sacch_frame_segment, 1, sizeof(state->nxdn_sacch_frame_segment));
@@ -537,6 +537,7 @@ void NXDN_decode_VCALL_ASSGN(dsd_opts * opts, dsd_state * state, uint8_t * Messa
   //run group/source analysis and tune if available/desired
   //group list mode so we can look and see if we need to block tuning any groups, etc
 	char mode[8]; //allow, block, digital, enc, etc
+  sprintf (mode, "%s", "");
 
   //if we are using allow/whitelist mode, then write 'B' to mode for block
   //comparison below will look for an 'A' to write to mode if it is allowed
@@ -544,16 +545,18 @@ void NXDN_decode_VCALL_ASSGN(dsd_opts * opts, dsd_state * state, uint8_t * Messa
 
   for (int i = 0; i < state->group_tally; i++)
   {
-    if (state->group_array[i].groupNumber == DestinationID) //source, or destination?
+    if (state->group_array[i].groupNumber == DestinationID && DestinationID != 0) //destination, if it isn't 0
     {
       fprintf (stderr, " [%s]", state->group_array[i].groupName);
       strcpy (mode, state->group_array[i].groupMode);
+      break;
     }
     //might not be ideal if both source and group/target are both in the array
-    else if (state->group_array[i].groupNumber == SourceUnitID) //source, or destination?
+    else if (state->group_array[i].groupNumber == SourceUnitID && DestinationID == 0) //source, if destination is 0
     {
       fprintf (stderr, " [%s]", state->group_array[i].groupName);
       strcpy (mode, state->group_array[i].groupMode);
+      break;
     }
   }
 
@@ -1389,6 +1392,7 @@ void NXDN_decode_scch(dsd_opts * opts, dsd_state * state, uint8_t * Message, uin
         //run group/tgt analysis and tune if available/desired
         //group list mode so we can look and see if we need to block tuning any groups, etc
         char mode[8]; //allow, block, digital, enc, etc
+        sprintf (mode, "%s", "");
 
         //if we are using allow/whitelist mode, then write 'B' to mode for block
         //comparison below will look for an 'A' to write to mode if it is allowed
@@ -1400,6 +1404,7 @@ void NXDN_decode_scch(dsd_opts * opts, dsd_state * state, uint8_t * Message, uin
           {
             fprintf (stderr, " [%s]", state->group_array[i].groupName);
             strcpy (mode, state->group_array[i].groupMode);
+            break;
           }
         }
 

src/p25p1_mdpu.c

@@ -164,6 +164,7 @@ void processMPDU(dsd_opts * opts, dsd_state * state)
 
   //group list mode so we can look and see if we need to block tuning any groups, etc
 	char mode[8]; //allow, block, digital, enc, etc
+  sprintf (mode, "%s", "");
 
 	//if we are using allow/whitelist mode, then write 'B' to mode for block
 	//comparison below will look for an 'A' to write to mode if it is allowed
@@ -320,6 +321,7 @@ void processMPDU(dsd_opts * opts, dsd_state * state)
         {
           fprintf (stderr, " [%s]", state->group_array[i].groupName);
           strcpy (mode, state->group_array[i].groupMode);
+          break;
         }
       }
 
@@ -417,6 +419,7 @@ void processMPDU(dsd_opts * opts, dsd_state * state)
         {
           fprintf (stderr, " [%s]", state->group_array[i].groupName);
           strcpy (mode, state->group_array[i].groupMode);
+          break;
         }
       }
 

src/p25p1_tdu.c

@@ -37,4 +37,9 @@ processTDU (dsd_opts* opts, dsd_state* state)
     //reset some strings -- since its a tdu, blank out any call strings, only want during actual call
     sprintf (state->call_string[0], "%s", "                     "); //21 spaces
     sprintf (state->call_string[1], "%s", "                     "); //21 spaces
+
+    //zero out on termination
+    state->payload_algid = 0;
+    state->payload_keyid = 0;
+    state->payload_miP = 0;
 }

src/p25p1_tdulc.c

@@ -446,4 +446,9 @@ processTDULC (dsd_opts* opts, dsd_state* state)
   sprintf (state->call_string[0], "%s", "                     "); //21 spaces
   sprintf (state->call_string[1], "%s", "                     "); //21 spaces
 
+  //zero out on termination
+  state->payload_algid = 0;
+  state->payload_keyid = 0;
+  state->payload_miP = 0;
+
 }

src/p25p2_frame.c

@@ -75,7 +75,7 @@ int dibit = 0;
 int vc_counter = 0;
 int framing_counter = 0;
 
-unsigned long long int isch = 0;
+uint64_t isch = 0;
 int isch_decoded = -1;
 int p2_duid[8] = {0};
 int16_t duid_decoded = 0;

src/p25p2_vpdu.c

@@ -76,6 +76,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
 
 	//group list mode so we can look and see if we need to block tuning any groups, etc
 	char mode[8]; //allow, block, digital, enc, etc
+	sprintf (mode, "%s", "");
 
 	//if we are using allow/whitelist mode, then write 'B' to mode for block
 	//comparison below will look for an 'A' to write to mode if it is allowed
@@ -106,6 +107,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
         {
           fprintf (stderr, " [%s]", state->group_array[i].groupName);
           strcpy (mode, state->group_array[i].groupMode);
+					break;
         }
       }
 
@@ -182,6 +184,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
         {
           fprintf (stderr, " [%s]", state->group_array[i].groupName);
           strcpy (mode, state->group_array[i].groupMode);
+					break;
         }
       }
 
@@ -293,6 +296,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
 					{
 						fprintf (stderr, " [%s]", state->group_array[i].groupName);
 						strcpy (mode, state->group_array[i].groupMode);
+						break;
 					}
 				}
 
@@ -389,6 +393,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
         {
           fprintf (stderr, " [%s]", state->group_array[i].groupName);
           strcpy (mode, state->group_array[i].groupMode);
+					break;
         }
       }
 
@@ -479,6 +484,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
         {
           fprintf (stderr, " [%s]", state->group_array[i].groupName);
           strcpy (mode, state->group_array[i].groupMode);
+					break;
         }
       }
 
@@ -626,6 +632,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
 					{
 						fprintf (stderr, " [%s]", state->group_array[i].groupName);
 						strcpy (mode, state->group_array[i].groupMode);
+						break;
 					}
 				}
 
@@ -794,6 +801,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
 					{
 						fprintf (stderr, " [%s]", state->group_array[i].groupName);
 						strcpy (mode, state->group_array[i].groupMode);
+						break;
 					}
 				}
 
@@ -907,6 +915,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
 					{
 						fprintf (stderr, " [%s]", state->group_array[i].groupName);
 						strcpy (mode, state->group_array[i].groupMode);
+						break;
 					}
 				}
 
@@ -1005,6 +1014,7 @@ void process_MAC_VPDU(dsd_opts * opts, dsd_state * state, int type, unsigned lon
         {
           fprintf (stderr, " [%s]", state->group_array[i].groupName);
           strcpy (mode, state->group_array[i].groupMode);
+					break;
         }
       }
 

src/provoice.c

@@ -41,7 +41,7 @@ void processProVoice (dsd_opts * opts, dsd_state * state)
   {
     fprintf (stderr, "%s", KGRN);
     fprintf (stderr, " Site: %lld AFS: %d-%d LCN: %d ", 
-              state->edacs_site_id, (state->lasttg >> 7) & 0xF, state->lasttg & 0x7F, state->edacs_tuned_lcn);
+              state->edacs_site_id, (state->lastsrc >> 7) & 0xF, state->lastsrc & 0x7F, state->edacs_tuned_lcn);
     fprintf (stderr, "%s", KNRM);
   }
 

src/rtl_sdr_fm.cpp

@@ -463,11 +463,14 @@ void dc_block_filter(struct demod_state *fm)
 	}
 	fm->dc_avg = avg;
 }
-
-int rms(int16_t *samples, int len, int step)
+//TODO: Fix This so we don't get random negative values in Cygwin (or 32-bit builds?)
+//Fixed -- I honestly think the issue is Cygwin can't keep up and if it can't run enough samples in the other thread,
+//then it reports some jank values, really unsure, I've never seen the issue in Linux side though
+long int rms(int16_t *samples, int len, int step)
 /* largely lifted from rtl_power */
 {
 	int i;
+	long int rms;
 	long p, t, s;
 	double dc, err;
 
@@ -481,7 +484,10 @@ int rms(int16_t *samples, int len, int step)
 	dc = (double)(t*step) / (double)len;
 	err = t * 2 * dc - dc * dc * len;
 
-	return (int)sqrt((p-err) / len);
+	rms = (long int)sqrt((p-err) / len);
+	//going with a value that's easy to figure out when its done the thing
+	if (rms < 0){ rms = 999; } //need to text nxdn with this setup to make sure it isn't broken in Windows Cygwin now
+	return rms;
 }
 
 void full_demod(struct demod_state *d)
@@ -1108,13 +1114,14 @@ void rtl_dev_tune(dsd_opts * opts, long int frequency)
 }
 
 //return RMS value (root means square) power level -- used as soft squelch inside of framesync
-int rtl_return_rms()
+long int rtl_return_rms()
 {
-	int sr = 0;
+	long int sr = 0;
+	#ifdef __arm__
+	sr = 100;
+	#else
 	sr = rms(demod.lowpassed, demod.lp_len, 1);
-	// 'Fix' potential negative value overflow from the rms function -- Observed in Windows builds
-	sr = abs(sr);
-	if (sr > 9999) sr = 9999;
+	#endif
 	return (sr);
 }
 

src/trellis.cpp

@@ -1,538 +0,0 @@
-/*
- *	Copyright (C) 2016 by Jonathan Naylor, G4KLX
- *
- *	Heavy Modificatins of Original Code to work for DSD-FME
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; version 2 of the License.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- */
-#include "dsd.h"
-
-#include <cstdio>
-#include <cassert>
-
-const unsigned int INTERLEAVE_TABLE[] = {
-	0U, 1U, 8U,   9U, 16U, 17U, 24U, 25U, 32U, 33U, 40U, 41U, 48U, 49U, 56U, 57U, 64U, 65U, 72U, 73U, 80U, 81U, 88U, 89U, 96U, 97U,
-	2U, 3U, 10U, 11U, 18U, 19U, 26U, 27U, 34U, 35U, 42U, 43U, 50U, 51U, 58U, 59U, 66U, 67U, 74U, 75U, 82U, 83U, 90U, 91U,
-	4U, 5U, 12U, 13U, 20U, 21U, 28U, 29U, 36U, 37U, 44U, 45U, 52U, 53U, 60U, 61U, 68U, 69U, 76U, 77U, 84U, 85U, 92U, 93U,
-	6U, 7U, 14U, 15U, 22U, 23U, 30U, 31U, 38U, 39U, 46U, 47U, 54U, 55U, 62U, 63U, 70U, 71U, 78U, 79U, 86U, 87U, 94U, 95U};
-
-const unsigned char ENCODE_TABLE[] = {
-	0U,  8U, 4U, 12U, 2U, 10U, 6U, 14U,
-	4U, 12U, 2U, 10U, 6U, 14U, 0U,  8U,
-	1U,  9U, 5U, 13U, 3U, 11U, 7U, 15U,
-	5U, 13U, 3U, 11U, 7U, 15U, 1U,  9U,
-	3U, 11U, 7U, 15U, 1U,  9U, 5U, 13U,
-	7U, 15U, 1U,  9U, 5U, 13U, 3U, 11U,
-	2U, 10U, 6U, 14U, 0U,  8U, 4U, 12U,
-	6U, 14U, 0U,  8U, 4U, 12U, 2U, 10U};
-
-const unsigned char DECODE_TABLE[] = { //flip the rows and columns, right?
-	0,4,1,5,3,7,2,6,
-	8,12,9,13,11,15,10,14,
-	4,2,5,3,7,1,6,0,
-	12,10,13,11,15,9,14,8,
-	2,6,3,7,1,5,0,4,
-	10,14,11,15,9,13,8,12,
-	6,0,7,1,5,3,4,2,
-	14,8,15,9,13,11,12,10
-};
-
-const unsigned char BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U};
-
-#define READ_BIT(p,i)    (p[(i)>>3] & BIT_MASK_TABLE[(i)&7])
-#define WRITE_BIT(p,i,b) p[(i)>>3] = (b) ? (p[(i)>>3] | BIT_MASK_TABLE[(i)&7]) : (p[(i)>>3] & ~BIT_MASK_TABLE[(i)&7])
-
-unsigned char state = 0U;
-//rework quickHamming to accept unsigned intergers instead and go bit by bit
-int quickHamming(unsigned int butt, unsigned int farts)
-{
-    unsigned int i = 0, count = 0, shit = 0, shart = 0;
-		//fprintf (stderr, "Distance Compare %X - %X \n", butt, farts );
-		for (i; i < 3; i++) //shift three places tops;
-		{
-			shit  = (butt  >> i)  & 0b1;
-			shart = (farts >> i)  & 0b1;
-			if (shit != shart)
-			{
-				count++;
-			}
-		}
-
-    return count;
-}
-
-bool CDMRTrellisFixCode(unsigned char* points, unsigned int failPos, unsigned char* payload)
-{
-	//unsigned int bestPos = 0U;
-	//unsigned int bestVal = 0U;
-
-	for (unsigned j = 0U; j < 20U; j++) {
-		unsigned int bestPos = 0U;
-		unsigned int bestVal = 0U;
-		//fprintf (stderr, "  fail%d-", failPos);
-
-		for (unsigned int i = 0U; i < 16U; i++) {
-			points[failPos] = i;
-
-			//fprintf (stderr, "i%d", i);
-
-			unsigned char tribits[49U];
-			unsigned int pos = CDMRTrellisCheckCode(points, tribits);
-			if (pos == 999U) {
-				CDMRTrellisTribitsToBits(tribits, payload);
-				return true;
-			}
-
-			if (pos > bestPos) {
-				bestPos = pos;
-				bestVal = i;
-			}
-		}
-
-		points[failPos] = bestVal;
-		failPos = bestPos;
-	}
-
-	return false;
-}
-
-void CDMRTrellisTribitsToBits(const unsigned char* tribits, unsigned char* payload)
-{
-
-
-	unsigned char bits[144];
-	for (int i = 0; i < 48; i++) {
-		bits[(i * 3) + 0] = (tribits[i] >> 2) & 1;
-		bits[(i * 3) + 1] = (tribits[i] >> 1) & 1;
-		bits[(i * 3) + 2] = tribits[i] & 1;
-	}
-
-
-	// convert bits to bytes
-	//fprintf (stderr, "\n Tribit Binary Sequence\n  ");
-	for (short i = 0; i < 144; i++)
-	{
-		//fprintf (stderr, "%b", bits[i]);
-	}
-	for(short int i = 0; i < 18; i++)
-  {
-		payload[i] = (bits[i * 8 + 0] << 7) | (bits[i * 8 + 1] << 6) | (bits[i * 8 + 2] << 5) | (bits[i * 8 + 3] << 4) |
-								 (bits[i * 8 + 4] << 3) | (bits[i * 8 + 5] << 2) | (bits[i * 8 + 6] << 1) | (bits[i * 8 + 7] << 0);
-	}
-
-	//for (int i = 0; i < 144; i++)
-		//payload[i/8] = (payload[i/8] << 1) | bits[i];
-		//DmrDataBit[j + 0] = (TrellisReturn[17-i] >> 0) & 0x01; //example
-
-}
-
-unsigned int CDMRTrellisCheckCode(const unsigned char* points, unsigned char* tribits)
-{
-
-	//unsigned char state = 0U; //move outside of function to preserve state for every iteration
-	//let's try reversing the points to pass through the decode table instead of flipping them here,
-	//it may mess up the fixcode and failpos POS
-	state = 0U;
-	for (unsigned int i = 0U; i < 49U;) //total number of points to process
-	{
-		tribits[i] = 9U;
-		for (unsigned int j = 0U; j < 8U; j++)
-		{
-			//if (points[i] == DECODE_TABLE[state * 8U + j])
-			//if (points[48-i] == DECODE_TABLE[state * 8U + j])
-			if (points[i] == ENCODE_TABLE[state * 8U + j])
-			{
-				tribits[i] = j;
-				state = tribits[i]; //carry over if found right away
-				i++; //increment i by one value
-				break;
-			}
-		}
-		//try to find shortest distance for surviving paths and decide on one
-		//seems to be that two paths will have distance value 1, and two will have distance value 2
-		//need to keep totaling up a few rounds before we can eliminate a path and resume?
-		if (tribits[i] == 9U)
-		{
-			int    distance  =  0;
-			int maxdistance  = 99; //random metric for two position distance
-			int pathdistance =  0;
-			unsigned int match     = 0;
-			unsigned int nextmatch = 0;
-			unsigned int q = 0;
-			//only 4 possible states for each point, but in 8 (0-7) FSM states
-			char path[99][99] = {0}; //[i][pathcount] = distance
-			int pathcount = 0;
-			for (unsigned int o = 0; o < 64; o++) //check entire state transition table for matches
-			{
-				if (points[i] == ENCODE_TABLE[o]) //ENCODE TABLE
-				{
-					match = o / (unsigned int)8; //get dividend no remainder/decimal I hope, get fsm state 0-7
-					//fprintf (stderr, "\n Point #%d [%d] Match State %d Position %d Tribit Value %d \n", i, points[i], match, o, o % (unsigned int)8);
-					distance = quickHamming(match, state);
-					//fprintf (stderr, "Raw Distance Current %d\n", distance);
-					path[i][pathcount] = distance ; //save which table values (paths) match as possible values and distance
-					for (q; q < 64; q++) //check entire state transition table for next point match
-					{
-						if (points[i+1] == ENCODE_TABLE[q]) //ENCODE TABLE
-						{
-							nextmatch = q / (unsigned int)8;
-							path[i+1][pathcount] = quickHamming(nextmatch, q % (unsigned int)8);
-							//fprintf (stderr, "Raw Distance Next %d\n", path[i+1][pathcount]);
-							pathcount++;
-							//fprintf (stderr, "State 0 Match %d Distance %d \n", o, distance);
-						}
-					}
-					for (short int z = 0; z <= pathcount; z++) //add metrics on paths to find shortest distance
-					{
-						pathdistance = path[i][0] + path[i+1][z];
-						//fprintf (stderr, "Total Path Distance %d\n", pathdistance);
-						if (pathdistance <= maxdistance) //equal too in case of tie?
-						{
-							maxdistance = pathdistance;
-							tribits[i]   = o % (unsigned int)8; //remainder value will be tribit value on table
-							if (i < 49) //just in case we are on 49 already, don't want to crash or something.
-							{
-								tribits[i+1] = q % (unsigned int)8; //remainder value will be tribit value on table
-							}
-
-							//fprintf (stderr, "Point #%d [%d] - Tribit Candidate %d\n", i,   points[i],   tribits[i]   );
-							//fprintf (stderr, "Point #%d [%d]- Tribit Candidate %d\n", i+1, points[i+1], tribits[i+1] );
-						}
-					}
-				}
-				//fprintf (stderr, "Selected Point #%d [%d] - Tribit Selection %d\n", i,   points[i],   tribits[i]   );
-				//fprintf (stderr, "Selected Point #%d [%d]- Tribit Selection %d\n", i+1, points[i+1], tribits[i+1] );
-			}
-			state = tribits[i+1]; //not quite sure if this will be needed or not, if so, set state to last found value
-			i += 2; //increment i by two since we already got the next tribit value as well;
-			//state = tribits[i]; //not quite sure if this will be needed or not, if so, set state to last found value
-			//i++; //increment i by two since we already got the next tribit value as well;
-		}
-
-	}
-	return 999U;
-}
-
-void CDMRTrellisDeinterleave(const unsigned char* data, signed char* dibits)
-{
-	int n;
-	//can only assume this is giving the correct dibits out, and not inverse or something.
-	/*
-	for (int i = 0; i < 98; i++) {
-		n = i * 2;
-		if (n >= 98) n += 68;
-		bool b1 = data[n] != 0x0;
-
-		n = i * 2 + 1;
-		if (n >= 98) n += 68;
-		bool b2 = data[n] != 0x0;
-
-		if (!b1 && b2)
-			dibit = +3;        // 1 - 01
-		else if (!b1 && !b2)
-			dibit = +1;        // 0 - 00
-		else if (b1 && !b2)
-			dibit = -1;        // 2 - 10
-		else
-			dibit = -3;        // 3 - 11
-
-		*/
-		//Keep it simple!
-		for (int i = 0; i < 98; i++)
-		{
-			n = INTERLEAVE_TABLE[97-i];
-			//n = i;
-			if (data[i] == 0)
-			{
-				dibits[n] =  1; //1
-			}
-			if (data[i] == 1)
-			{
-				dibits[n] =  3; //3
-			}
-			if (data[i] == 2)
-			{
-				dibits[n] =  -1; //-1
-			}
-			if (data[i] == 3)
-			{
-				dibits[n] = -3; //-3
-			}
-		}
-
-		//n = INTERLEAVE_TABLE[i]; //should this go in reverse?
-		//n = INTERLEAVE_TABLE[97-i]; //should this go in reverse?
-		//dibits[n] = dibit; //should this go in reverse too? not sure on this one, but definitely the INTERLEAVE_TABLE
-		//n = INTERLEAVE_TABLE[97-i]; //should this go in reverse?
-		//dibits[97-n] = dibit;
-	//}
-}
-
-void CDMRTrellisDibitsToPoints(const signed char* dibits, unsigned char* points)
-{
-	for (unsigned int i = 0U; i < 49U; i++) {
-		if (dibits[i * 2U + 0U] == +1 && dibits[i * 2U + 1U] == -1)
-			points[i] = 0U;
-		else if (dibits[i * 2U + 0U] == -1 && dibits[i * 2U + 1U] == -1)
-			points[i] = 1U;
-		else if (dibits[i * 2U + 0U] == +3 && dibits[i * 2U + 1U] == -3)
-			points[i] = 2U;
-		else if (dibits[i * 2U + 0U] == -3 && dibits[i * 2U + 1U] == -3)
-			points[i] = 3U;
-		else if (dibits[i * 2U + 0U] == -3 && dibits[i * 2U + 1U] == -1)
-			points[i] = 4U;
-		else if (dibits[i * 2U + 0U] == +3 && dibits[i * 2U + 1U] == -1)
-			points[i] = 5U;
-		else if (dibits[i * 2U + 0U] == -1 && dibits[i * 2U + 1U] == -3)
-			points[i] = 6U;
-		else if (dibits[i * 2U + 0U] == +1 && dibits[i * 2U + 1U] == -3)
-			points[i] = 7U;
-		else if (dibits[i * 2U + 0U] == -3 && dibits[i * 2U + 1U] == +3)
-			points[i] = 8U;
-		else if (dibits[i * 2U + 0U] == +3 && dibits[i * 2U + 1U] == +3)
-			points[i] = 9U;
-		else if (dibits[i * 2U + 0U] == -1 && dibits[i * 2U + 1U] == +1)
-			points[i] = 10U;
-		else if (dibits[i * 2U + 0U] == +1 && dibits[i * 2U + 1U] == +1)
-			points[i] = 11U;
-		else if (dibits[i * 2U + 0U] == +1 && dibits[i * 2U + 1U] == +3)
-			points[i] = 12U;
-		else if (dibits[i * 2U + 0U] == -1 && dibits[i * 2U + 1U] == +3)
-			points[i] = 13U;
-		else if (dibits[i * 2U + 0U] == +3 && dibits[i * 2U + 1U] == +1)
-			points[i] = 14U;
-		else if (dibits[i * 2U + 0U] == -3 && dibits[i * 2U + 1U] == +1)
-			points[i] = 15U;
-	}
-}
-
-void CDMRTrellisPointsToDibits(const unsigned char* points, signed char* dibits)
-{
-	for (unsigned int i = 0U; i < 49U; i++) {
-		switch (points[i]) {
-		case 0U:
-			dibits[i * 2U + 0U] = +1;
-			dibits[i * 2U + 1U] = -1;
-			break;
-		case 1U:
-			dibits[i * 2U + 0U] = -1;
-			dibits[i * 2U + 1U] = -1;
-			break;
-		case 2U:
-			dibits[i * 2U + 0U] = +3;
-			dibits[i * 2U + 1U] = -3;
-			break;
-		case 3U:
-			dibits[i * 2U + 0U] = -3;
-			dibits[i * 2U + 1U] = -3;
-			break;
-		case 4U:
-			dibits[i * 2U + 0U] = -3;
-			dibits[i * 2U + 1U] = -1;
-			break;
-		case 5U:
-			dibits[i * 2U + 0U] = +3;
-			dibits[i * 2U + 1U] = -1;
-			break;
-		case 6U:
-			dibits[i * 2U + 0U] = -1;
-			dibits[i * 2U + 1U] = -3;
-			break;
-		case 7U:
-			dibits[i * 2U + 0U] = +1;
-			dibits[i * 2U + 1U] = -3;
-			break;
-		case 8U:
-			dibits[i * 2U + 0U] = -3;
-			dibits[i * 2U + 1U] = +3;
-			break;
-		case 9U:
-			dibits[i * 2U + 0U] = +3;
-			dibits[i * 2U + 1U] = +3;
-			break;
-		case 10U:
-			dibits[i * 2U + 0U] = -1;
-			dibits[i * 2U + 1U] = +1;
-			break;
-		case 11U:
-			dibits[i * 2U + 0U] = +1;
-			dibits[i * 2U + 1U] = +1;
-			break;
-		case 12U:
-			dibits[i * 2U + 0U] = +1;
-			dibits[i * 2U + 1U] = +3;
-			break;
-		case 13U:
-			dibits[i * 2U + 0U] = -1;
-			dibits[i * 2U + 1U] = +3;
-			break;
-		case 14U:
-			dibits[i * 2U + 0U] = +3;
-			dibits[i * 2U + 1U] = +1;
-			break;
-		default:
-			dibits[i * 2U + 0U] = -3;
-			dibits[i * 2U + 1U] = +1;
-			break;
-		}
-	}
-}
-
-void CDMRTrellisBitsToTribits(const unsigned char* payload, unsigned char* tribits)
-{
-	for (unsigned int i = 0U; i < 48U; i++) {
-		unsigned int n = 143U - i * 3U;
-
-		bool b1 = READ_BIT(payload, n) != 0x00U;
-		n--;
-		bool b2 = READ_BIT(payload, n) != 0x00U;
-		n--;
-		bool b3 = READ_BIT(payload, n) != 0x00U;
-
-		unsigned char tribit = 0U;
-		tribit |= b1 ? 4U : 0U;
-		tribit |= b2 ? 2U : 0U;
-		tribit |= b3 ? 1U : 0U;
-
-		//tribits[i] = tribit;
-	}
-
-	tribits[48U] = 0U;
-}
-
-bool CDMRTrellisDecode(const unsigned char* data, unsigned char* payload)
-{
-	assert(data != NULL);
-	assert(payload != NULL);
-	unsigned char tribits[49U];
-	for (short i = 0; i < 49; i++)
-	{
-		tribits[i] = 0; //initialize with 0 values so we know later on if these values are actually being assigned or not
-	}
-
-	if (1 == 2)
-  {
-    fprintf (stderr, "\n Raw Trellis Dibits inside Decoder\n  ");
-    for (short i = 0; i < 98; i++)
-    {
-      fprintf (stderr, "#%d [%0d] ", i, data[i]);
-    }
-  }
-	signed char dibits[98U];
-	CDMRTrellisDeinterleave(data, dibits);
-	if (1 == 2)
-  {
-    fprintf (stderr, "\n Trellis Deinterleaved Dibits inside Decoder (converted to signed)\n  ");
-    for (short i = 0; i < 98; i++)
-    {
-      fprintf (stderr, "#%d [%d] ", i, dibits[i]); //signed char, values should be -3, -1, 1, 3 only
-    }
-  }
-	unsigned char points[49U];
-	// unsigned char reverse_points[49U];
-	CDMRTrellisDibitsToPoints(dibits, points);
-	//maybe keep point 49 at 49, since its the flush?
-	//fprintf (stderr, "\n Trellis Reverse Points inside Decoder\n  ");
-	// for (short i = 0; i < 49; i++)
-	// {
-	// 	reverse_points[i] = points[48-i];
-	// 	//fprintf (stderr, "#%d [%02u] ", i, reverse_points[i]);
-	// }
-	//reverse_points[48] = points[48];
-	//fprintf (stderr, "#%d [%02u] ", 48, reverse_points[48]);
-
-	if (1 == 2)
-  {
-    fprintf (stderr, "\n Trellis Points inside Decoder\n  ");
-    for (short i = 0; i < 49; i++)
-    {
-      fprintf (stderr, "#%d [%02u] ", i, points[i]);
-    }
-  }
-	// Check the original code
-
-	unsigned int failPos = CDMRTrellisCheckCode(points, tribits);
-	//unsigned int failPos = CDMRTrellisCheckCode(reverse_points, tribits); //stack smashing detected terminated
-
-	if (1 == 2)
-	{
-		fprintf (stderr, "\n Check Code Trellis Tribits inside Decoder\n  ");
-		for (short i = 0; i < 49; i++)
-		{
-			fprintf (stderr, "#%d [%0u] ", i, tribits[i]); //shouldn't have any values greater that 0x7?
-		}
-	}
-
-	if (failPos == 999U)
-	{
-		CDMRTrellisTribitsToBits(tribits, payload);
-		if (1 == 2)
-		{
-		 fprintf (stderr, "\nTrellis Payload Tribits\n %s ", KCYN);
-		 for (short i = 0; i < 49; i++)
-		 {
-		   fprintf (stderr, "#%d [%0u] ", i, tribits[i]); //shouldn't have any values greater that 0x7?
-		 }
-		}
-		if (1 == 2)
-		{
-		 fprintf (stderr, "\nTrellis Payload Tribits to Bytes inside Decoder\n %s ", KCYN);
-		 for (short i = 0; i < 18; i++)
-		 {
-			 fprintf (stderr, "[%02X]", payload[i]);
-		 }
-		 fprintf (stderr,"%s", KNRM); //change back to normal
-		}
-		return true;
-	}
-
-	unsigned char savePoints[49U];
-	for (unsigned int i = 0U; i < 49U; i++)
-		savePoints[i] = points[i];
-		//savePoints[i] = reverse_points[i];
-
-	bool ret = CDMRTrellisFixCode(points, failPos, payload);
-	//bool ret = CDMRTrellisFixCode(reverse_points, failPos, payload);
-	if (ret){
-
-		if (1 == 2)
-	  {
-	    fprintf (stderr, "\n if return Trellis Tribits inside Decoder\n  ");
-	    for (short i = 0; i < 49; i++)
-	    {
-	      fprintf (stderr, "#%d [%0u] ", i, tribits[i]); //shouldn't have any values greater that 0x7?
-	    }
-	  }
-
-		if (1 == 2)
-		{
-		 fprintf (stderr, "\nTrellis Payload Tribits to Bits fix return true\n  "); //this one seems to be happening
-		 for (short i = 0; i < 18; i++)
-		 {
-		   fprintf (stderr, "[%02X]", payload[i]);
-		 }
-		}
-		return true; }
-
-	if (failPos == 0U)
-	{
-	if (1 == 2)
-	{
-	 fprintf (stderr, "\nTrellis Payload Tribits to Bytes failPos == 0U\n  ");
-	 for (short i = 0; i < 18; i++)
-	 {
-		 fprintf (stderr, "[%02X]", payload[i]);
-	 }
-	}
-		return false; }
-
-	// Backtrack one place for a last go
-	return CDMRTrellisFixCode(savePoints, failPos - 1U, payload);
-}

src/ysf.c

@@ -812,7 +812,7 @@ void processYSF(dsd_opts * opts, dsd_state * state)
 
   //print some useful decoded stuff
   if (dt == 0 && err == 0) fprintf (stderr, "V/D1 "); //Voice/Data Type 1
-  if (dt == 1 && err == 0) fprintf (stderr, "DATA "); //Full Rate Voice
+  if (dt == 1 && err == 0) fprintf (stderr, "DATA "); //Full Rate Data
   if (dt == 2 && err == 0) fprintf (stderr, "V/D2 "); //Voice/Data Type 2
   if (dt == 3 && err == 0) fprintf (stderr, "VWFR "); //Full Rate Voice