Updates the Elonics E4000 tuner wiki page for version 0.3.0

E4000_V0.3.0.md

@@ -0,0 +1,40 @@
+**Version:** 0.3.0
+
+RTL-2832 E4000 Tuner Configuration
+---
+
+![Figure 1: E4000 Tuner Configuration](images/E4000_V0.3.0.png)
+
+**Figure 1:** E4000 Tuner Configuration
+
+The following settings shown in Figure 1 are available for configuring the E4000 tuner:
+
+#### Name
+Name for the tuner configuration. 
+
+#### Tuner Info Button
+Provides a summary of details about the currently selected tuner, including USB ID, Vendor, Product, 
+Serial number, IR status, and Remote Wake status.
+
+#### Sample Rate
+Allows you to change the sample rate.
+
+#### PPM
+Adjusts the frequency correction Parts Per Million (PPM) value for the tuner.  Airspy normally
+provides fairly stable frequency accuracy and this value can be left at 0.0.  If you notice in
+the spectral display that the frequency labels are slightly misaligned to observed signals, you
+can adjust this value to align the frequency to the observed signals with known operating 
+frequencies.
+
+#### Master Gain
+Sets the overall gain for the tuner and automatically controls the individual gain controls.  Use 
+the **Manual** setting to enable and independently change the LNA, Mixer and Enhance gain controls
+
+#### LNA Gain
+Sets the LNA gain.  Place the Master Gain into **Manual** mode to enable this control.
+
+#### Mixer Gain
+Sets the Mixer gain.  Place the Master Gain into **Manual** mode to enable this control.
+
+#### Enhance Gain
+Sets the Enhance gain.  Place the Master Gain into **Manual** mode to enable this control.

Tuners_V0.3.0.md

@@ -28,7 +28,7 @@ be added in the future.
 
   * [Airspy](Airspy_V0.3.0)
   * [Funcube Dongle Pro](FuncubeDonglePro_V0.3.0) (1.0)
-  * [Funcube Dongle Pro Plus](FuncubeDongleProPlus) (2.0)
+  * [Funcube Dongle Pro Plus](FuncubeDongleProPlus_V0.3.0) (2.0)
   * [HackRF](HackRF)
   * [RTL-2832 with Elonics E4000](E4000)
   * [RTL-2832 with Rafael Micro R820T or R820T2](R820T)