Wiki page cleanup

v0.3/APCO25_V0.3.0.md

@@ -5,14 +5,14 @@ traffic/voice/data call following when a tuner is available that can monitor
 both the control channel and any traffic channels within the available bandwidth
 of the tuner, or across multiple tuners.
 
-## P-25 Phase I##
+## P-25 Phase I
 Decodes FDMA Common Air Interface (CAI) C4FM modulation and Linear Simulcast 
 Modulation (LSM).
 
-## P-25 Phase II##
+## P-25 Phase II
 Phase II TDMA decoding is not currently supported.
 
-## P-25 Hybrid (Phase I/II)##
+## P-25 Hybrid (Phase I/II)
 P25 hybrid systems use both Phase 1 control channels and Phase I and Phase II
 traffic channels, providing transition support for users with a combination of
 Phase I and Phase II radios.
@@ -21,7 +21,7 @@ TDMA configuration messages that are broadcast on Phase I control channels are
 decoded.  Currently these include the TDMA timing synchronization and TDMA 
 channel identifier messages.
 
-## Audio Vocoders ##
+## Audio Vocoders 
 
 ### IMBE ###
 APCO-25 Phase I audio calls use the multi-band excitation model vocoder to

v0.3/Airspy_V0.3.0.md

@@ -22,7 +22,7 @@ The info tab displays information about the tuner:
 
 ## Using the Airspy ##
 
-![Figure 1: Airspy Tuner Configuration](v0.3/images/Airspy_V0.3.0)
+![Figure 1: Airspy Tuner Configuration](v0.3/images/Airspy_V0.3.0.png)
 
 ## Updating Firmware ##
 

v0.3/SpectralDisplay_V0.3.0.md

@@ -1,5 +1,3 @@
-**Version:** 0.3.0
-
 Spectral Display
 ---
 

v0.3/Streaming_V0.3.0.md

@@ -108,7 +108,7 @@ radio ID has Channel A and Channel B attached, and the talkgroup has Channel B a
 Channel C attached, then the call would be streamed to all three channels. 
 
 ### Attaching a Broadcast Channel to an Individual Alias
-1. Create an [Alias List](AliasList) and attach it to your decoding [Channel Configuration](Channel)
+1. Create an [Alias List](Aliases_V0.3.0) and attach it to your decoding [Channel Configuration](Channels_V0.3.0)
 1. In the **Aliases** tab, select the alias you want to stream
 1. In the Alias editor screen, switch to the **Audio/Identifier** tab
 1. Click **New** and select **Audio Broadcast Channel**
@@ -117,13 +117,13 @@ Channel C attached, then the call would be streamed to all three channels.
 1. Repeat these steps to add additional broadcast channels for the alias.
 
 ### Attaching a Broadcast Channel to Multiple Aliases
-1. Create an [Alias List](AliasList) and attach it to your decoding [Channel Configuration](Channel)
+1. Create an [Alias List](Aliases_V0.3.0) and attach it to your decoding [Channel Configuration](Channels_V0.3.0)
 1. In the **Aliases** tab, select the the set of aliases that you want to modify
 1. In the multiple alias editor, place a check in the **Stream** entry
 1. Select the broadcast channel from the drop-down list
 1. Click **Save**
 
-![Figure 2: Now Playing with Streaming Status Panel](images/StreamingStatusPanel.png)
+![Figure 2: Now Playing with Streaming Status Panel](v0.3/images/StreamingStatusPanel_V0.3.0.png)
 **Figure 2:** Now Playing with Streaming Status Panel Showing
 
 ## Streaming Status Panel